2060 S Oak St - Plan - Laserfiche WebLink

Home Browse Search

ESR-1475 Page 4 of 14 1507.2.7.1 and 2006 IBC 1504.1.1)] or IRC Section R905.2.4.1, as applicable. Shingles tested in accordance with ASTM D7158 are classified as Class H and qualify for use in locations where the maximum basic wind speed is 150 mph (67 m/s) or less with an exposure category of B or C (ASCE 7) and a maximum building height of 60 feet (18.3 m). Installation must be in accordance with 2024, 2021 and 2018 IBC Section 1507.2.6 (2015, 2012, 2009 and 2006 IBC Section 1507.2.7) or IRC Section R905.2.6, as applicable. 5.0 CONDITIONS OF USE: The GAF asphalt shingle roof covering systems described in this report comply with, or are suitable alternatives to what is specified in, those codes listed in Section 1.0 of this report, subject to the following conditions: 5.1 The shingles must be manufactured, identified, and installed in accordance with the applicable codes, this report, and the manufacturer’s published installation instructions. In the event of a conflict between this report and the manufacturer’s published installation instructions, this report governs. 5.2 Installation must be in accordance with Section 4.0 of this report. 5.3 The GAF shingle products are manufactured at the locations noted in Table 1, under a quality control program with inspections by ICC-ES. 6.0 EVIDENCE SUBMITTED 6.1 Data in accordance with ASTM D3462. 6.2 Reports of wind resistance testing in accordance with ASTM D7158 and ASTM D3161. 6.3 Reports of testing in accordance with UL 790 (ASTM E108). 6.4 Quality documentation. 7.0 IDENTIFICATION 7.1 The ICC-ES mark of conformity, electronic labeling or the evaluation report number (ESR-1475) along with the name, registered trademark, or registered logo of the report holder must be included in the product label. 7.2 In addition, the GAF asphalt shingles are identified by each bundle of shingles must bear a label with the name and address of the GAF manufacturing plant location; the product name; the roof classification (Class A); the installation instructions; the evaluation report number (ESR-1475); a reference indicating compliance with ASTM D3161 Class F or ASTM D7158, Class H, as applicable. Additionally, in accordance with ASTM D3462, each bundle of shingles must be marked with the area of roof surface covered and the style, type and color of the product. 7.3 The report holder’s contact information is the following: GAF 1 CAMPUS DRIVE PARSIPPANY, NEW JERSEY 07054 (877) 423-7663 www.gaf.com