Laserfiche WebLink
CONTINUOUS <br />360 ROTATION <br />0.15 <br />6.00 ANCHOR <br />NOTE: <br />0.65 <br />25.50 MAX. SETBACK <br />1.11 <br />43.61 <br />1 DIMENSIONS VARY WITH SPECIFIC APPLICATIONS. SPECIFICATIONS ARE NOMINAL AND ARE SUBJECT TO CHANGE. <br />PLEASE CONTACT SPECTRUM AQUATICS FOR CUSTOM APPLICATIONS. <br />ENGINEERING DATA <br />PRODUCT: MOTION TREK 350 DLX <br />PRODUCT #: 153121-DLX <br />MATERIAL: 304L STAINLESS STEEL <br />7100 Spectrum Lane Missoula, Montana 59808 800.791.8056 www.spectrumaquatics.com <br />REVISION: A Thursday, July 21, 2016 10:28:48 AM <br />1. <br />7 <br />8 <br />69 <br />. <br />9 <br />9 <br />1. <br />0 <br />8 <br />42 <br />. <br />5 <br />7 <br />0. <br />4 <br />6 <br />18 <br />. <br />0 <br />0 <br />0. <br />8 <br />0 <br />31 <br />. <br />5 <br />1 <br />0. <br />2 <br />9 <br />11 <br />. <br />5 <br />4 <br />0. <br />7 <br />5 <br />29 <br />. <br />5 <br />4 <br />4" <br />101.6mm <br />MIN CORE DRILL DIAMETER <br />2 7/8" <br />73.0mm <br />A <br />2 3/8" <br />61.0mm <br />6" <br />152.8mm 6 1/2" <br />165.1mm <br />A SECTION A-A <br />ANCHOR CAP KEY <br />ANCHOR CAP <br />BONDING BOLT <br />NOTE: <br />1 DIMENSIONS VARY WITH SPECIFIC APPLICATIONS. <br />SPECIFICATIONS ARE NOMINAL AND ARE SUBJECT TO CHANGE. PLEASE <br />CONTACT SPECTRUM PRODUCTS FOR CUSTOM APPLICATIONS. <br />ENGINEERING DATA <br />7100 SPECTRUM LANE <br />MISSOULA, MT 59808 <br />VOICE: 406.542.9781 <br />FAX: 406.542.1158 <br />PRODUCT:2.375" COPOLYMER LIFT ANCHOR <br />PRODUCT #:28510-00 <br />REVISION: <br />MATERIAL: <br />X1+ <br />ANCHOR FOUNDATION <br />7100 Spectrum Lane Missoula, Montana 59808 800.791.8056 www.spectrumaquatics.com <br />7100 SPECTRUM LANE <br />MISSOULA, MT 59808 <br />VOICE: 406.542.9781 <br />FAX: 406.542.1158 <br />ACCESSIBLE NOTES <br />ACCESSIBLE LIFT NOTES <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />February 11, 2020 <br /> <br />Shane Clagett <br />Spectrum Aquatics <br />7100 Spectrum Lane <br />Missoula, MT 59808 <br /> <br />Re: Motion Trek 350 –Footing Justification <br /> <br />Shane, <br /> <br />We have reviewed the concrete anchorage design for the Spectrum Aquatics Motion Trek 350 Pool <br />Lift and provided justification for the footing design and anchorage. The design was verified using <br />the 2018 International Building Code (2018 IBC), 2019 California Building Code (2019 CBC), 2014 <br />American Concrete Institute 318 (ACI 318-14), and the 2016 American Society of Civil Engineers 7 <br />(ASCE 7-16). In accordance with the strength design method, load factors of 1.2 and 1.6 were <br />applied to the dead load and live load provided by Spectrum Aquatics. The base plate and lift <br />components were not a part of our design scope. <br /> <br />The lift was analyzed under a live load of 350 lb in addition to the lift’s weight of 109 lb. The <br />anchorage solution utilizes a 6” long 2.375” diameter post embedded into the concrete. For post <br />installed anchorage, it is recommended that either ‘Hilti’ HY-200 or ‘Simpson’ SET-XP, or an <br />approved alternative adhesive be used to set post installed elements. Plan view and section view <br />details are provided for additional information. <br /> <br />The lift should be placed on a 12 inches deep reinforced concrete pad. The surrounding grade <br />should be excavated to allow for the pad to be poured flush with the surrounding slab. It is <br />recommended that the foundation pad for the lift be a minimum of 2’-6” long and 2’-6” wide. It is <br />acceptable to have the perimeter of the pad slope at a ratio of 1:1 to assist in the concrete pour. The <br />pad should be reinforced with a mat of 4-#4 reinforcing bars each way top and bottom. See the <br />attached details. It is recommended that these bars be developed into the adjacent slab a minimum <br />of 24 inches on all sides where sufficient material exists. Where existing slab occurs, this should be <br />done by drilling and epoxying the reinforcement in the pad into the existing slab. The use of Hilti HY- <br />200, Simpson SET-XP, or an alternative adhesive should be used with a minimum embedment of 5 <br />inches. <br /> <br />DCI Engineers cannot ensure the adequacy of the surrounding pool deck due to unknown factors <br />including the deck’s concrete compressive strength, thickness, and reinforcing. It is recommended <br />that in locations where existing slab occurs, a 2’-7” square be saw cut, removed, and replaced with <br />the concrete pad specified. <br /> <br /> <br /> <br />DESIGN CRITERIA <br />MOTION TREK 350 – BASE DESIGN <br /> <br />GENERAL <br />DESIGN CODES 2019 California Building Code (CBC) <br /> 2018 International Building Code (IBC) <br /> 2014 American Concrete Institute (ACI) <br /> 2016 American Society of Civil Engineers 7 (ASCE) <br /> <br />DEAD LOAD <br /> WEIGHT OF LIFT 109 lbs <br /> LOAD FACTOR 1.2 <br /> <br />LIVE LOAD <br /> WEIGHT OF USER 350 lbs <br /> LOAD FACTOR 1.6 <br /> <br />SEISMIC LOADS <br /> SITE CLASS D <br /> SDS 1.7 Maximum <br />IMPORTANCE FACTOR 1.0 <br /> SEISMIC USE GROUP 1 <br /> <br />MATERIALS <br /> STEEL MEMBERS UNO 304 S.S. <br /> ANCHOR BOLTS ASTM A325 or Better <br />CONCRETE 28 DAY f’c 3000 psi <br /> REINFORCING BAR, Fy ASTM A615 Grade 60 <br /> WELD METAL F7X-EXXX or E70XX <br />PREAPPROVED EPOXY ‘Simpson’ Set-XP or ‘Hilti’ HY-200 <br /> <br />SOIL (ASSUMED) <br />ALLOWABLE BRG PRESSURE 1500 psf <br />ALLOWABLE LATERAL BRG PRESSURE 100 psf <br /> <br />ADA COMPLIANT POOL Lifts SPECTRUMMotion Trek 350 <br />The Motion Trek 350 is an ADA compliant battery powered lift that is self operable <br />from the deck and water with a robust operating system. The Motion Trek 350 is <br />designed for in-ground pools and spas. <br />• Fully ADA Compliant <br />• 350 pound operating load capacity <br />• Self operable from the deck and water <br />• 90 lifts per battery charge <br />• All stainless steel construction (electropolished 304L grade) <br />• Coated with Spectra Shield® for maximum corrosion protection <br />• Stabilizer bar significantly improves lift stability during transfer <br />• Spacious seat with excellent lumbar support designed for ease of transfer <br />• Rotationally and vertically powered with 360 degree continuous powered rotation <br />• Proprietary Robust Operating System and Actuator outperforms the competition <br />• Accommodates pool wall setback of 6” to 22” and water draft up to 12” <br />• Easy to install, even into existing concrete decks <br />• Improved rotation system for a smooth ride <br />7100 Spectrum Lane Missoula, MT 59808 • 800.791.8056 • SPECTRUMAQUATICS.COM <br />Part# 153121 • R2 10–2016 <br />Part# 153121 - Lift INCLUDES: <br />ADACOMPLIANT <br />Title 24: <br />California Code <br />• One watertight <br />hardwired remote <br />control <br />• Battery and battery <br />charger <br />• Footrest <br />• Deck anchor <br />• Seat belt <br />• Two armrests <br /> <br /> Lift Cover <br />#47949 <br />ADDITIONAL OPTIONS: <br />Battery <br />#153607 <br />Lift Kit <br />#152161 <br />POOL/SPA HANDICAP LIFT - SPECTRUM- MOTION TREK 27.ADA DETAILS <br />SP-9 <br />DATE: <br />DRAWN BY: <br />SHEET TITLE: <br />SHEET NUMBER: <br />PROJECT NAME: <br />THE METT <br />200 First American Way,HE MET <br /> Santa Ana, CA 92707 <br />DEVELOPER: <br />Legado at the MET <br />121 S. Beverly Drive, <br /> Beverly Hills, CA 90212 <br />9/25/2020 100% DD <br />10/16/20 CD PLAN CHECK <br /> SUBMITAL SET <br />5/14/2021 PRICING SET <br />CLASS: B/C-53 <br />EXPIRES: 12-31-2 <br />Signature Date <br />6 <br />27439 BOSTIK CT. <br />TEMECULA, CA 92590 <br />P(951)296-3939 F(951)296-3945 <br />LICENSE# CA-326760 <br />2-25-2026