|
0 5'
<br />GRAPHIC SCALES:
<br />Issue Date
<br />1/16" = 1'-0"
<br />50'
<br />1/8" = 1'-0" 1/4" = 1'-0" 1/2" = 1'-0" 3/4" = 1'-0" 1" = 1'-0" 1-1/2" = 1'-0" 3" = 1'-0"
<br />0 5'25'0 1'12'0 1'6'0 4'0 3'1'0 2'0 1'
<br />Chckd By
<br />Drwn By
<br />Scale
<br />Building ID:
<br />KP Proj. No.
<br />Permit No.
<br />Sheet
<br />SheetsOf
<br />Sheet Title
<br />Project
<br />Facility
<br />This document is the property of the Owner and is
<br />Project Architect Approval:
<br />Architect/Engineer Of Record:
<br />IF THIS SHEET IS NOT 30"x42" , IT IS
<br />A REDUCED PRINT - SCALE ACCORDINGLY
<br />National Facilities Services
<br />Post Office Box 12916
<br />Oakland California 94604
<br />not to be used without owner's written permission.
<br />Floor Lev: Section:
<br />Revisions
<br />By Appr.
<br />HGW Proj. No.
<br />©
<br />H
<br />G
<br />W
<br />
<br />A
<br />r
<br />c
<br />h
<br />i
<br />t
<br />e
<br />c
<br />t
<br />u
<br />r
<br />e
<br />,
<br />
<br />a
<br />l
<br />l
<br />
<br />r
<br />i
<br />g
<br />h
<br />t
<br />s
<br />
<br />r
<br />e
<br />s
<br />e
<br />r
<br />v
<br />e
<br />d
<br />.
<br />
<br />
<br />A
<br />n
<br />y
<br />
<br />u
<br />s
<br />e
<br />
<br />w
<br />i
<br />t
<br />ho
<br />u
<br />t
<br />
<br />p
<br />e
<br />r
<br />m
<br />i
<br />s
<br />s
<br />i
<br />o
<br />n
<br />
<br />i
<br />s
<br />
<br />e
<br />x
<br />p
<br />r
<br />e
<br />s
<br />s
<br />l
<br />y
<br />
<br />p
<br />r
<br />o
<br />h
<br />i
<br />b
<br />i
<br />t
<br />e
<br />d
<br />.
<br />
<br />
<br />P
<br />l
<br />o
<br />t
<br />t
<br />e
<br />d
<br />1955 Bacon Street. San Diego, CA 92107
<br />Office 619 523 8487
<br />www.hgwarchitecture.com
<br />KAISER PERMANENTE
<br />BUILDINGS ON BRAND
<br />2/
<br />2
<br />5
<br />/
<br />2
<br />0
<br />2
<br />6
<br />
<br />1
<br />0
<br />:
<br />0
<br />5
<br />:
<br />4
<br />0
<br />
<br />A
<br />M
<br />02/25/2026
<br />Checker
<br />Author
<br />CAP030942
<br />T100
<br />CALGREEN - NONRESIDENTIAL
<br />MANDATORY MEASURES
<br />3401 South Harbor Boulevard,
<br />Santa Ana, CA 92704
<br />pl
<br />a
<br />n
<br />
<br />c
<br />h
<br />e
<br />c
<br />k
<br />
<br />r
<br />e
<br />s
<br />u
<br />b
<br />m
<br />i
<br />t
<br />t
<br />a
<br />l
<br />2441
<br />EXTERIOR SIGNAGE - HARBOR-MAC
<br />ARTHUR
<br />TABLE H-2
<br />STANDARDS FOR COMMERCIAL PRE-RINSE SPRAY VALUES MANUFACTURED ON OR AFTER
<br />JANUARY 28, 2019
<br />PRODUCT CLASS [spray force in ounce force (ozf)] MAXIMUM FLOW RATE (gpm)
<br />Product Class 1 (≤5.0 ozf)1.00
<br />Product Class 2 (> 5.0 ozf and ≤8.0 ozf) 1.20
<br />Product Class 3 (> 8.0 ozf) 1.28
<br />TABLE 5.106.5.4.1 RACEWAY CONDUIT AND PANEL POWER REQUIREMENTS FOR MEDIUM-AND HEAVY-DUTY EVSE [N]
<br />BUILDING TYPE BUILDING SIZE (SQ. FT.)NUMBER OF OFF-STREET
<br />LOADING SPACES
<br />ADDITIONAL CAPACITY REQUIRED
<br />(KVA) FOR RACEWAY & BUSWAY
<br />AND TRANSFORMER & PANEL
<br />Grocery
<br />10,000 to 90,000
<br />1 or 2 200
<br />3 or Greater 400
<br />Greater than 90,000 1 or Greater 400
<br />Retail
<br />10,000 to 135,000
<br />1 or 2 200
<br />3 or Greater 400
<br />Greater than 135,000 1 or Greater 400
<br />Warehouse
<br />20,000 to 256,000 1 or 2 200
<br />3 or Greater 400
<br />Greater than 256,000 1 or Greater 400
<br />1. IESNA Lighting Zones 0 and 5 are not applicable; refer to Lighting Zones as defined in the California Energy Code
<br />and Chapter 10 of the California Administrative Code.
<br />2. For property lines that abut public walkways, bikeways, plazas and parking lots, the property line may be
<br />considered to be 5 feet beyond the actual property line for purpose of determining compliance with this section.
<br />For property lines that abut public roadways and public transit corridors, the property line may be considered to be
<br />the centerline of the public roadway or public transit corridor for the purpose of determining compliance with this
<br />section.
<br />3. General lighting luminaires in areas such as outdoor parking, sales or storage lots shall meet these reduced
<br />ratings. Decorative luminaries located in these areas shall meet U-value limits for "all other outdoor lighting"
<br />chapter 3 - green building
<br />section 301 general
<br />301.1 scope. Buildings shall be designed to include the green building measures specified as mandatory in the
<br />application checklists contained in this code. Voluntary green building measures are also included in the application
<br />checklists and may be included in the design and construction of structures covered by this code, but are not required
<br />unless adopted by a city, county, or city and county as specified in Section 101.7.
<br />301.3 nonresidential additions and alterations. The provisions of individual sections of Chapter 5 apply to newly
<br />constructed buildings, building additions of 1,000 square feet or greater, and/or building alterations with a permit valuation
<br />of $200,000 or above (for occupancies within the authority of California Building Standards Commission). Code sections
<br />relevant to additions and alterations shall only apply to the portions of the building being added or altered within the scope
<br />of the permitted work. A code section will be designated by a banner to indicate where the code section only applies to
<br />newly constructed buildings [N] or to additions and/or alterations [A]. When the code section applies to both, no banner
<br />will be used.
<br />301.3.1 nonresidential additions and alterations that cause updates to plumbing fixtures only:
<br />Note: On and after January 1, 2014, certain commercial real property, as defined in Civil Code Section 1101.3, shall
<br />have its noncompliant plumbing fixtures replaced with appropriate water-conserving plumbing fixtures under specific
<br />circumstances. See Civil Code Section 1101.1 for definitions, types of commercial real property affected, effective
<br />dates, circumstances necessitating replacement of noncompliant plumbing fixtures, and duties and responsibilities for
<br />compliance.
<br />301.3.2 waste diversion. The requirements of Section 5.408 shall be required for additions and alterations whenever
<br />a permit is required for work.
<br />301.4 public schools and community colleges
<br />301.5 health facilities
<br />section 302 mixed occupancy buildings
<br />302.1 mixed occupancy buildings.In mixed occupancy buildings, each portion of a building shall comply with the
<br />specific green building measures applicable to each specific occupancy.
<br />section 303 phased projects
<br />303.1 phased projects. For shell buildings and others constructed for future tenant improvements, only those code
<br />measures relevant to the building components and systems considered to be new construction (or newly constructed) shall
<br />apply.
<br />303.1.1 Initial Tenant improvements.The provisions of this code shall apply only to the initial tenant improvements to a
<br />project. Subsequent tenant improvements shall comply with the scoping provisions in Section 301.3 non-residential
<br />additions and alterations.
<br />abbreviations definitions:
<br />HCD department of housing and community development
<br />BSC california building standards commission
<br />DSA-SS division of the state architect, structural safety
<br />OSHPD office of statewide health planning and development
<br />LR low rise
<br />HR high rise
<br />AA additions and alterations
<br />N new
<br />2 0 2 2 c a l g r e e n ( C G B S C ) n o t e s
<br />chapter 5 - nonresidential mandatory measures
<br />section 5.101 general
<br />5.101.1 scope. The provisions of this chapter outline planning, design and development methods that include
<br />environmentally responsible site selection, building design, building siting and development to protect, restore and
<br />enhance the environmental quality of the site and respect the integrity of adjacent properties.
<br />section 5.102 definitions
<br />5.102.1 definitions. The following terms are defined in Chapter 2 (and are included here for reference)
<br />cutoff luminaires.Luminaires whose light distribution is such that the candela per 1000 lamp lumens does not numerically
<br />exceed 25 (2.5 percent) at an angle of 90 degrees above nadir, and 100 (10 percent) at a vertical angle of 80 degrees above
<br />nadir. This applies to all lateral angles around the luminaire.
<br />low-emitting and fuel efficient vehicles.eligible vehicles are limited to the following:
<br />1. Zero emission vehicle (ZEV), enhanced advanced technology PZEV (enhanced AT ZEV) or transitional zero
<br />emission vehicles (TZEV) regulated under CCR, Title 13, Section 1962.
<br />2. High-efficiency vehicles, regulated by U.S. EPA, bearing a fuel economy and greenhouse gas rating od 9 oe 10 as
<br />regulated under 40 CFR Section 600 Subpart D.
<br />neighborhood electric vehicle.A motor vehicle that meets the definition of "low-speed vehicle" either in Section 385.5 of
<br />the Vehicle Code or in 49CFR571.500 (as it existed on July 1, 2000), and is certified to zero-emission vehicle standards.
<br />tenant-occupants. Building occupants who inhabit a building during its normal hours of operation as permanent
<br />occupants, such as employees, as distinguished from customers and other transient visitors.
<br />vanpool vehicle. Eligible vehicles are limited to any motor vehicle, other than a motortruck or truck tractor, designed for
<br />carrying more than 10 but not more than 15 persons including the driver, which is maintained and used primarily for the
<br />nonprofit work-related transportation of adults for the purpose of ridesharing.
<br />Note: Source: Vehicle Code, Division 1, Section 668
<br />zev.Any vehicle certified to zero-emission standards.
<br />section 5.106 site development
<br />5.106.1 storm water pollution prevention for projects that disturb less than one acre of land. Newly constructed
<br />projects and additions which disturb less than one acre of land, and are not part of a larger common plan of development or
<br />sale, shall prevent the pollution of storm water runoff from the construction activities through one or more of the following
<br />measures:
<br />5.106.1.1 local ordinance. Comply with a lawfully enacted storm water management and/or erosion control
<br />ordinance.
<br />5.106.1.2 best management practices (BMPs).Prevent the loss of soil through wind or water erosion by
<br />implementing an effective combination of erosion and sediment control and good housekeeping BMPs.
<br />1. Soil loss BMPs that should be considered for implementation as appropriate for each project include, but are not
<br />limited to, the following:
<br />a. Scheduling construction activity during dry weather, when possible.
<br />b. Preservation of natural features, vegetation, soil, and buffers around surface waters.
<br />c. Drainage swales or lined ditches to control stormwater flow.
<br />d. Mulching or hydroseeding to stabilize disturbed soils.
<br />e. Erosion control to protect slopes.
<br />f. Protection of storm drain inlets (gravel bags or catch basin inserts).
<br />g. Perimeter sediment control (perimeter silt fence, fiber rolls).
<br />h. Sediment trap or sediment basin to retain sediment on site.
<br />i. Stabilized construction exits.
<br />j. Wind erosion control.
<br />k. Other soil loss BMPs acceptable to the enforcing agency.
<br />2. Good housekeeping BMPs to manage construction equipment, materials, non-stormwater discharges and wastes
<br />that should be considered for implementation as appropriate for each project include, but are not limited to, the
<br />following:
<br />a. Dewatering activities.
<br />b. Material handling and waste management.
<br />c. Building materials stockpile management.
<br />d. Management of washout areas (concrete, paints, stucco, etc.).
<br />e. Control of vehicle/equipment fueling to contractor's staging area.
<br />f. Vehicle and equipment cleaning performed off site.
<br />g. Spill prevention and control.
<br />h. Other housekeeping BMPs acceptable to the enforcing agency.
<br />5.106.2 stormwater pollution prevention for projects that disturb one or more acres of land. Comply with all lawfully
<br />enacted stormwater discharge regulations for projects that (1) disturb one acre or more of land, or (2) disturb less than one
<br />acre of land but are part of a larger common plan of development sale.
<br />Note: Projects that (1) disturb one acre or more of land, or (2) disturb less than one acre of land but are part of the larger
<br />common plan of development or sale must comply with the post-construction requirements detailed in the applicable
<br />National Pollutant Discharge Elimination System (NPDES) General permit for Stormwater Discharges Associated with
<br />Construction and Land Disturbance Activities issued by the State Water Resources Control Board or the Lahontan Regional
<br />Water Quality Control Board (for projects in the Lake Tahoe Hydrologic Unit).
<br />The NPDES permits require postconstruction runoff (post-project hydrology) to match the preconstruction runoff (pre-
<br />project hydrology) with the installation of postconstruction stormwater management measures. The NPDES permits
<br />emphasize runoff reduction through on-site stormwater use, interception, evapotranspiration, and infiltration through
<br />nonstructural controls, such as Low Impact Development (LID) practices, and conversation design measures. Stormwater
<br />volume that cannot be addressed using nonstructural practices is required to be captured in structural practices and be
<br />approved by the enforcing agency.
<br />Refer to the current applicable permits on the State Water Resources Control Board website at:
<br />www.waterboards.ca.gov/constructionstormwater. Consideration to the stormwater runoff management measures should be
<br />given during the initial design process for appropriate integration into site development.
<br />5.106.4 bicycle parking. For buildings within the authority of California Building Standards Commission as specified in
<br />Section 103, comply with Section 5.106.4.1. For buildings within the authority of the Division of the State Architect
<br />pursuant to Section 105, comply with Section 5.106.4.2
<br />5.106.4.1 bicycle parking.Comply with Sections 5.106.4.1.1 and 5.106.4.1.2; or meet the applicable local
<br />ordinance, whichever is stricter.
<br />5.106.4.1.1 Short-term bicycle parking. If the new project or an addition or alteration is anticipated to generate
<br />visitor traffic, provide permanently anchored bicycle racks within 200 feet of the visitors' entrance, readily visible
<br />to passers-by, for 5% of new visitor motorized vehicle parking spaces being added, with a minimum of one two-
<br />bike capacity rack.
<br />Exception: Additions or alterations which add nine or less visitor vehicular parking spaces.
<br />5.106.4.1.2 long-term bicycle parking.For new buildings with tenant spaces that have 10 or more tenant-
<br />occupants, provide secure bicycle parking for 5 percent of the tenant-occupant vehicular parking spaces with a
<br />minimum of one bicycle parking facility.
<br />5.106.4.1.3 For additions or alterations that add 10 or more tenant-occupant vehicular parking spaces, provide
<br />secure bicycle parking for 5 percent of the tenant vehicular parking spaces being added, with a minimum of one
<br />bicycle parking facility.
<br />5.106.4.1.4 For new shell buildings in phased projects provide secure bicycle parking for 5 percent of the
<br />anticipated tenant-occupant vehicular parking spaces with a minimum of one bicycle parking facility.
<br />5.106.4.1.5 Acceptable bicycle parking facility for Sections 5.106.4.1.2, 5.106.4.1.3, and 5.106.4.1.4 shall be
<br />convenient from the street and shall meet one of the following:
<br />1. Covered, lockable enclosures with permanently anchored racks for bicycles;
<br />2. Lockable bicycle rooms with permanently anchored racks; or
<br />3. Lockable, permanently anchored bicycle lockers.
<br />5.106.4.2 bicycle parking.For public schools and community colleges, comply with Sections 5.106.4.2.1 and
<br />5.106.4.2.2
<br />5.106.4.2.1 student bicycle parking.provide permanently anchored bicycle racks conveniently accessed with a
<br />minimum of four two-bike capacity racks per new building.
<br />5.106.4.2.2 staff bicycle parking.Provide permanent, secure bicycle parking conveniently accessed with a
<br />minimum of two staff bicycle parking spaces per new building. Acceptable bicycle parking facilities shall be
<br />convenient from the street or staff parking area and shall meet one of the following:
<br />1. Covered, lockable enclosures with permanently anchored racks for bicycles;
<br />2. Lockable bicycle rooms with permanently anchored racks; or
<br />3. Lockable, permanently anchored bicycle lockers.
<br />5.106.5.3 electric vehicle (EV) charging. [N] Construction to provide electric vehicle infrastructure and facilitate
<br />electric vehicle charging shall comply with Section 5.106.5.3.1 and shall be provided in accordance with regulations
<br />in the California Building Code and the California Electrical Code.
<br />exceptions:
<br />1. On a case-by-case basis where the local enforcing agency has determined compliance with this section
<br />is not feasible based upon one of the following conditions:
<br />a. Where there is no local utility power supply
<br />b. Where the local utility is unable to supply adequate power.
<br />c. Where there is evidence suitable to the local enforcement agency substantiating the local utility
<br />infrastructure design requirements, directly related to the implementation of Section 5.106.5.3,
<br />may adversely impact the construction cost of the project.
<br />2. Parking spaces accessible only by automated mechanical car parking systems are not required to
<br />comply with this code section
<br />5.106.5.3.1 EV capable spaces. [N] ] EV capable spaces shall be provided in accordance with Table 5.106.5.3.1
<br />and the following requirements.
<br />1. Raceways complying with the California Electrical Code and no less that 1-inch (25 mm) diameter shall
<br />be provided and shall originate at a service panel or a subpanel(s) serving the area, and shall terminate
<br />in close proximity to the proposed location of the EV capable and into a suitable listed cabinet,
<br />box,enclosure or equivalent. A common raceway may be used to serve multiple EV charging spaces.
<br />2. A service panel or subpanel (s) shall be provided with panel space and electrical load capacity for a
<br />dedicated 208/240 volt, 40-ampere minimum branch circuit for each EV capable space, with delivery of
<br />30-ampere minimum to an installed EVSE at each EVCS.
<br />3. The electrical system and any on-site distribution transformers shall have sufficient capacity to supply
<br />full rated amperage at each EV capable space.
<br />4. The service panel or subpanel circuit directory shall identify the reserved overcurrent protective devices
<br />space(s) as "EV CAPABLE". The raceway termination location shall be permanently and visibly marked
<br />as "EV CAPABLE."
<br />Note:A parking space served by electric vehicle supply equipment or designed as a future EV charging space
<br />shall count as at least one standard automobile parking space only for the purpose of complying with any
<br />applicable minimum parking space requirements established by an enforcement agency. See vehicle Code
<br />Section 22511.2 for further details.
<br />TABLE 5.106.5.3.1
<br />TOTAL NUMBER OF ACTUAL
<br />PARKING SPACES
<br />NUMBER OF REQUIRED EV
<br />CAPABLE SPACES
<br />NUMBER OF EVCS (EV CAPABLE SPACES
<br />PROVIDED WITH EVSE)^2
<br />0-9 0 0
<br />10-25 2 0
<br />26-50 8 2
<br />51-75 13 3
<br />76-100 17 4
<br />101-150 25 6
<br />151-200 35 9
<br />201 AND OVER 20% of total ¹25% of EV capable spaces ¹
<br />1. Where there is insufficient electrical supply.
<br />2. The number of required EVCS (EV capable spaces provided with EVSE) in column 3 count towards
<br />the total number of required EV capable spaces shown in column 2.
<br />5.106.5.3.2 electric vehicle charging stations (EVCS) EV capable spaces shall be provided with EVSE to create
<br />EVCS in the number indicated in Table 5.106.5.3.1. The EVCS required by Table 5.106.5.3.1 may be provided with
<br />EVSE in any combination of Level 2 and Direct Current Fast Charging (DCFC), except that at least one Level 2
<br />EVSE shall be provided.
<br />One EV charger with multiple connectors capable of charging multiple EVs simultaneously shall be permitted if the
<br />electrical load capacity required by Section 5.106.5.3.1 for each EV capable space is accumulatively supplied to
<br />the EV charger.
<br />The installation of each DCFC EVSE shall be permitted to reduce the minimum number of required EV capable
<br />spaces without EVSE by five and reduce proportionally the required electrical load capacity to the service panel or
<br />subpanel.
<br />5.106.5.3.3 use of automatic load management systems (ALMS). ALMS shall be permitted for EVCS. When
<br />ALMS is installed, the required electrical load capacity specified in section 5.106.5.3.1 for each EVCS may be
<br />reduced when serviced by an EVSE controlled by an ALMS. Each EVSE controlled by an ALMS shall deliver a
<br />minimum 30 amperes to an EV when charging one vehicle and shall deliver a minimum 3.3 kW while
<br />simultaneously charging multiple EVs.
<br />5.106.5.3.4 accessible EVCS. When EVSE is installed, accessible EVSC shall be provided in accordance with the
<br />California Building Code, Chapter 11B, Section 11B-228.3.
<br />Note: For EVCS signs, refer to Caltrans Traffic Operations Policy Directive 13-01 (Zero Emission Vehicle Signs
<br />and Pavement Markings) or its successor(s).
<br />5.106.5.4 electric vehicle (EV) charging: medium-duty and heavy-duty. [N] Construction shall comply with section
<br />5.106.5.4.1 to facilitate future installation of electric vehicle supply equipment (EVSE). Construction for warehouses,
<br />grocery stores and retail stores with planned off-street loading spaces shall also comply with Section 5.106.5.4.1 for
<br />future installation of medium- and heavy-duty EVSE.
<br />Exceptions:
<br />1. On a case-by-case basis where the local enforcing agency has determined compliance with this section is not
<br />feasible based upon one of the following conditions:
<br />a. Where there is no local utility power supply.
<br />b. Where the local utility is unable to supply adequate power.
<br />c. Where there is evidence suitable to the local enforcing agency substantiating that additional local utility
<br />infrastructure design requirements, directly related to the implementation of Section 5.106.5.3, may
<br />adversely impact the construction cost of the project.
<br />When EVSE(s) is/are installed, it shall be in accordance with the California Building Code, the California Electrical
<br />Code and as follows:
<br />5.106.5.4.1 Electric vehicle charging readiness requirements for warehouse, grocery stores and retail stores
<br />with planned off-street loading spaces. [N] In order to avoid future demolition when adding EV charging supply
<br />and distribution equipment, spare raceways(s) or busway(s) and adequate capacity for transformers(s), service
<br />panels(s) or subpanel(s) shall be installed at the time of construction in accordance with the California Electrical
<br />Code. Construction plans and specifications shall include but are not limited to, the following:
<br />1. The transformer, main service equipment and subpanel shall meet the minimum power requirement in
<br />Table 5.106.5.4.1 to accommodate the dedicated branch circuits for the future installation of EVSE.
<br />2. The construction documents shall indicate on or more location(s) convenient to the planned offstreet
<br />loading space(s) reserved for medium-and heavy-duty ZEV charging cabinets and charging dispensers,
<br />and a pathway reserved for routing of conduit from the termination of the raceway(s) or busway(s) to the
<br />charging cabinet(s) and dispenser(s) as shown in Table 5.106.5.4.1
<br />3. Raceway(s) or busway(s) originating at a main service panel or a subpanel(s) serving the area where
<br />potential future medium-and heavy-duty EVSE will be located and shall terminate in close proximity to
<br />the potential future location of the charging equipments for medium- and heavy-duty vehicles.
<br />4. The raceway(s) or busway(s) shall be sufficient size to carry the minimum additional system load to the
<br />future location of the charging for medium- and heavy-duty ZEVs as shown in Table 5.106.5.4.1.
<br />1. Identifies the construction and demolition waste materials to be diverted from disposal by efficient usage,
<br />recycling, reuse on the project or salvage for future use or sale.
<br />2. Determines if construction and demolition waste materials will be sorted on-site (source-separated) or bulk
<br />mixed (single stream).
<br />3. Identifies diversion facilities where construction and demolition waste material collected will be taken.
<br />4. Specifies that the amount of construction and demolition waste materials diverted shall be calculated by
<br />weight or volume, but not by both.
<br />5.408.1.2 waste management company. Utilize a waste management company that can provide verifiable documents
<br />that the percentage of construction and demolition waste managerial diverted from the landfill complies with this
<br />section.
<br />Note:The owner or contractor shall make the determination if the construction and demolition waste material will
<br />be diverted by a waste management company.
<br />Exceptions to Sections 5.408.1.1 and 5.408.1.2
<br />1. Excavated soil and land-clearing debris.
<br />2. Alternate waste reduction methods developed by working with local agencies if diversion or recycle
<br />facilities capable of compliance with this item do not exist.
<br />3. Demolition waste meeting local ordinance or calculated in consideration of local recycling facilities and
<br />markets.
<br />5.408.1.3 waste stream reduction alternative. The combined wight of new construction disposal that does not exceed
<br />two pounds per square foot of building area may be deemed to meet the 65% minimum requirement as approved by the
<br />enforcing agency.
<br />5.408.1.4 documentation. Documentation shall be provided to the enforcing agency which demonstrates compliance
<br />with Sections 5.408.1.1, through 5.408.1.3. The waste management plan shall be updated as necessary and shall be
<br />accessible during construction for examination by the enforcing agency.
<br />Notes:
<br />1. Sample forms found in "A Guide to the California Green Building Standards Code (Nonresidential)" located
<br />www.dgs.ca.gov/BSC/Resources/Page-Content/Building-Standards-Commission- Resources-List-
<br />Folder/CALGreen may be used to assist in documenting compliance with the waste management plan.
<br />2. Mixed construction and demolition debris processors can be located at the California Department of
<br />Resources Recycling and Recovery (CalRecycle).
<br />5.408.2 universal waste. [A] Additions and alterations to a building or tenant space that meet the scoping provisions in
<br />Section 301.3 for nonresidential additions and alterations, shall require verification that Universal Waste items such as
<br />fluorescent lamps and ballast and mercury containing thermostats as well as other California prohibited Universal Waste
<br />materials are disposed of properly and are diverted from landfills. A list of prohibited Universal Waste materials shall be
<br />included in the construction documents.
<br />Note:Refer to the Universal Waste Rule link at: http://www.dtsc.ca.gov/universalwaste/
<br />5.408.3 excavated soil and land clearing debris. 100 percent of trees, stumps, rocks and associated vegetation and soils
<br />resulting primarily from land clearing shall be reused or recycled. For a phased project, such material may be stockpiled on
<br />site until the storage site is developed.
<br />Exception: Reuse, either on or off-site, of vegetation or soil contaminated by disease or pest infestation.
<br />Notes:
<br />1. If contamination by disease or pest infestation is suspected, contact the County Agricultural Commissioner
<br />and follow its direction for recycling or disposal of the material.
<br />2. For a map of know pest and/or disease quarantine zones, consult with the California Department of Food and
<br />Agriculture. (www.cdfa.ca.gov)
<br />section 5.410 building maintenance and operations
<br />5.410.1 recycling by occupants. Provide readily accessible areas that serve the entire building and are identified for the
<br />depositing, storage and collection of non-hazardous materials for recycling, including (at a minimum) paper, corrugated
<br />cardboard, glass, plastics, organic waste, and metals or meet a lawfully enacted local recycling ordinance, if more
<br />restrictive.
<br />Exception:Rural jurisdictions that meet and apply for the exemption in Public Resources Code 42649.82 (a)(2)(A) et
<br />seq. shall also be exempt from the organic waste portion of this section.
<br />5.410.1.1 additions.All additions conducted within a 12-month period under single or multiple permits, resulting in
<br />an increase of 30% or more in floor area, shall provide recycling areas on site.
<br />Exception: Additions within a tenant space resulting in less than a 30% increase in the tenant space area.
<br />5.410.1.2 sample ordinance.Space allocation for recycling areas shall comply with Chapter 18, Part 3, Division 30
<br />of the Public Resources Code. Chapter 18 is known as the California Solid Waste Reuse and Recycling Access Act of
<br />1991 (Act).
<br />Note: A sample ordinance for use by local agencies may be found in Appendix A of the document at the CalRecycle’s
<br />web site.
<br />5.410.2 commissioning. [N] new buildings 10,000 square feet and over. For new buildings 10,000 square feet and over,
<br />building commissioning shall be included in the design and construction processes of the building project to verify that the
<br />building systems and components meet the owner’s or owner representative’s project requirements. Commissioning shall
<br />be performed in accordance with this section by trained personnel with experience on projects of comparable size and
<br />complexity. For I-occupancies that are not regulated by OSHPD or for I-occupancies and L-occupancies that are not
<br />regulated y the California Energy Code Section 100.0 Scope, all requirements in Sections 5.410.2 through 5.410.2.6 shall
<br />apply.
<br />Note:For energy-related systems under the scope (Section 100) of the California Energy Code, including heating,
<br />ventilation, air conditioning (HVAC) systems and controls, indoor lighting systems and controls, as well as water
<br />heating systems and controls, refer to California Energy Code Section 120.8 for commissioning requirements
<br />Commissioning requirements shall include:
<br />1. Owner’s or Owner representative’s project requirements.
<br />2. Basis of design.
<br />3. Commissioning measures shown in the construction documents.
<br />4. Commissioning plan.
<br />5. Functional performance testing.
<br />6. Documentation and training.
<br />7. Commissioning report.
<br />Exceptions:
<br />1. Unconditioned warehouses of any size.
<br />2. Areas less than 10,000 square feet used for offices or other conditioned accessory spaces within unconditioned
<br />warehouses.
<br />3. Tenant improvements less than 10,000 square feet as described in Section 303.1.1.
<br />4. Open parking garages of any size, or open parking garage areas, of any size, within a structure.
<br />Note: For the purposes of this section, unconditioned shall mean a building, area, or room which does not provide
<br />heating and or air conditioning.
<br />Informational Notes:
<br />1. IAS AC 476 is an accreditation criteria for organizations providing training and/or certification of commissioning
<br />personnel. AC 476 is available to the Authority Having Jurisdiction as a reference for qualifications of
<br />commissioning personnel. AC 476 does not certify individuals to conduct functional performance tests or to
<br />adjust and balance systems.
<br />2. Functional performance testing for heating, ventilation, air conditioning systems and lighting controls must be
<br />performed in compliance with the California Energy Code.
<br />5.410.2.1 owner's or owner representative's project requirements (OPR). [N]The expectations and requirements of
<br />the building appropriate to its phase shall be documented before the design phase of the project begins. This
<br />documentation shall include the following:
<br />1. Environmental and sustainability goals.
<br />2. Building sustainable goals.
<br />3. Indoor environmental quality requirements.
<br />4. Project program, including facility functions and hours of operation, and need for after hours operation.
<br />5. Equipment and systems expectations.
<br />6. Building occupant and operation and maintenance (O&M) personnel expectations.
<br />5.410.2.2 basis of design (BOD). [N] A written explanation of how the design of the building systems meets the OPR
<br />shall be completed at the design phase of the building project. The Basis of Design document shall cover the following
<br />systems:
<br />1. Renewable energy systems.
<br />2. Landscape irrigation systems.
<br />3. Water reuse system.
<br />5.410.2.3 commissioning plan. [N] Prior to permit issuance a commissioning plan shall be completed to document
<br />how the project will be commissioned. The commissioning plan shall include the following:
<br />1. General project information.
<br />2. Commissioning goals.
<br />3. Systems to be commissioned. Plans to test systems and components shall include:
<br />a. An explanation of the original design intent.
<br />b. Equipment and systems to be tested, including the extent of tests.
<br />c. Functions to be tested.
<br />d. Conditions under which the test shall be performed.
<br />e. Measurable criteria for acceptable performance.
<br />4. Commissioning team information.
<br />5. Commissioning process activities, schedules and responsibilities. Plans for the completion of
<br />commissioning shall be included.
<br />5.410.2.4 functional performance testing. [N] Functional performance tests shall demonstrate the correct
<br />installation and operation of each component, system and system-to-system interface in accordance with the approved
<br />plans and specifications. Functional performance testing reports shall contain information addressing each of the
<br />building components tested, the testing methods utilized, and include any readings and adjustments made.
<br />5.410.2.5 documentation and training. [N] A Systems Manual and Systems Operations Training are required,
<br />including Occupational Safety and Health Act (OSHA) requirements in California Code of Regulations (CCR), Title 8,
<br />Section 5142, and other related regulations.
<br />5.410.2.5.1 systems manual. [N]Documentation of the operational aspects of the building shall be completed
<br />within the systems manual and delivered to the building owner or representative. The systems manual shall
<br />include the following:
<br />1. Site information, including facility description, history and current requirements.
<br />2. Site contact information.
<br />3. Basic operations and maintenance, including general site operating procedures, basic troubleshooting,
<br />recommended maintenance requirements, site events log.
<br />4. Major systems.
<br />5. Site equipment inventory and maintenance notes.
<br />6. A copy of verifications required by the enforcing agency or this code.
<br />7. Other resources and documentation, if applicable.
<br />TABLE 5.106.8 [N] MAXIMUM ALLOWABLE BACKLIGHT, UPLIGHT AND GLARE (BUG) RATINGS 1,2
<br />ALLOWABLE RATING LIGHTING
<br />ZONE LZ0
<br />LIGHTING
<br />ZONE LZ1
<br />LIGHTING
<br />ZONE LZ2
<br />LIGHTING
<br />ZONE LZ3
<br />LIGHTING
<br />ZONE LZ4
<br />MAXIMUM ALLOWABLE BACKLIGHT RATING
<br />luminaire greater than 2 mounting heights (MH) from
<br />property line N/A No Limit No Limit No Limit No Limit
<br />luminaire back hemisphere is 1-2 MH from property
<br />line N/A B2 B3 B4 B4
<br />Luminaire back hemisphere is 0.5-1 MH from property
<br />line N/A B1 B2 B3 B3
<br />Luminaire back hemisphere is less than 0.5 MH from
<br />property line N/A B0 B0 B1 B2
<br />MAXIMUM ALLOWABLE UPLIGHT RATING (U)
<br />For area lighting 3 N/A U0 U0 U0 U0
<br />For all other outdoor lighting,including decorative
<br />luminaires N/A U1 U2 U3 UR
<br />MAXIMUM ALLOWABLE GLARE RATING 5 (G)
<br />MAXIMUM ALLOWABLE GLARE RATING 5(G)N/A G1 G2 G3 G4
<br />5 (G) N/A G0 G1 G1 G2
<br />5(G)N/A G0 G0 G1 G1
<br />5 (G) N/A G0 G0 G0 G1
<br />MAXIMUM ALLOWABLE GLARE RATING
<br />MAXIMUM ALLOWABLE GLARE RATING
<br />MAXIMUM ALLOWABLE GLARE RATING
<br />5.106.8.1 facing-backlight [N]. Luminaries within 2MH of a property line shall be oriented so that the nearest property
<br />line is behind the fixture, and shall comply with the backlight rating specified in Table 5.106.8 based on the lighting zone
<br />and distance to the nearest point of that property line.
<br />Exception: corners.If two property lines (or two segments of the same property line) have equidistant point to the
<br />luminaire, then the luminaire may be oriented so that the intersection of the two lines (the corner) is directly behind the
<br />luminaire. The luminaire shall still use the distance to the nearest points(s) on the property lines to determine the
<br />required backlight rating.
<br />5.106.8.2 facing-glare. For luminaires covered by 5.106.8.1, if a property line also exists within or extends into the front
<br />hemisphere within 2MH of the luminaire then the luminaire shall comply with the more stringent glare rating specified in
<br />Table 5.106.8 based on the lighting zone and distance to the nearest point on the nearest property line within the front
<br />hemisphere.
<br />Note: [N]
<br />1. See also California Building Code, Chapter 12, Section 1205.6 for college campus lighting requirements for
<br />parking facilities and walkways.
<br />2. Refer to Chapter 8 (Compliance Forms, Worksheets and Reference Material) for IES TM-15-11 Table A-1,
<br />California Energy Code Tables 130.2-A and 130.2-B
<br />3. Refer to the California Building Code for requirements for additions and alterations.
<br />5.106.10 grading and paving.Construction plans shall indicate how site grading or a drainage system will manage all
<br />surface water flows to keep water from entering buildings. Examples of methods to manage surface water include, but are
<br />not limited to, the following:
<br />1. Swales
<br />2. Water collection and disposal systems.
<br />3. French drains.
<br />4. Water retention gardens.
<br />5. Other water measures which keep surface water away from buildings and aid in groundwater recharge
<br />Exception: Additions and alterations not altering the drainage path.
<br />5.106.12 shade trees. Shade Trees shall be planted to comply with Sections 5.106.12.1, 5.106.12.2, and 5.106.12.3.
<br />Percentages shown shall be measured at noon on the summer solstice. Landscape irrigation necessary to establish and
<br />maintain tree health shall comply with Section 5.304.6.
<br />5.106.12.1 surface parking areas. Shade tree plantings, minimum #10 container size or equal, shall be installed to
<br />provide shade over 50 percent of the parking area within 15 years.
<br />Exceptions: Surface parking area covered by solar photovoltaic shade structures with roofing materials that comply
<br />with Table A5.106.11.2.2 in Appendix A5 shall be permitted in whole or in part in lieu of shade tree planting.
<br />5.106.12.2 landscape areas.Shade tress plantings, minimum #10 container size or equal shall be installed to
<br />provide shade of 20% of the landscape area within 15 years.
<br />Exceptions: Playfields for organized sport activity are not included in the total area calculation.
<br />5.106.12.3 hardscape areas.Shade tree plantings, minimum #10 container size or equal shall be installed to provide
<br />shade over 20 percent of the hardscape area within 15 years.
<br />Exceptions:
<br />1. Walks, hardscape areas covered by solar photovoltaic shade structures or shade structures with roofing
<br />materials that comply with Table A5.106.11.2.2 in Appendix A5 shall be permitted in whole or in part in lieu
<br />of shade tree planting.
<br />2. Designated and marked play areas of organized sport activity are not included in the total area calculation.
<br />division 5.2 energy efficiency
<br />section 5.201 general
<br />5.201.1 scope. California Energy Code. For the purposes of mandatory energy efficiency standards in this code, the
<br />California Energy Commission will continue to adopt mandatory building standards.
<br />division 5.3 water efficiency and conservation
<br />section 5.301 general
<br />5.301.1 scope. The provisions of this chapter shall establish the means of conserving water use indoors, outdoors and in
<br />wastewater conveyance.
<br />section 5.302 definitions
<br />5.302.1 definitions.The following terms are defined in Chapter 2 (and are included here for reference)
<br />evapotranspiration adjustment factor (ETAF) [DSA-SS].An adjustment factor when applied to reference evapotranspiration
<br />that adjusts for plant factors and irrigation efficiency, which are two major influences on the amount of water that needs to
<br />be applied to the landscape.
<br />footprint area [DSA-SS]. The total area of the furthest exterior wall of the structure projected to natural grade, not including
<br />exterior areas such as stairs, covered walkways, patios and decks.
<br />metering faucet. A self-closing faucet that dispenses a specific volume of water for each actuation cycle. The volume or
<br />cycle duration can be fixed or adjustable.
<br />graywater.Pursuant to Health and Safety Code Section 17922.12, "graywater" means untreated wastewater that has not been
<br />contaminated by any toilet discharge, has not been affected by infectious, contaminated, or unhealthy bodily wastes, and
<br />does not present a threat from contamination by unhealthful processing, manufacturing, or operating wastes. "Graywater"
<br />includes, but is not limited to wastewater from bathtubs, showers, bathroom washbasins, clothes washing machines and
<br />laundry tubs, but does not include waste water from kitchen sinks or dishwashers.
<br />model water efficient landscape ordinance (MWELO).The California ordinance regulating landscape design, installation
<br />and maintenance practices that will ensure commercial, multifamily and other developer installed landscapes greater than
<br />2500 square feet meet an irrigation water budget developed based on landscaped area and climatological parameters.
<br />model water efficient landscape ordinance (MWELO). [HCD]The California model ordinance (California Code of
<br />Regulations, Title 23, Division 2, Chapter 2.7), regulating landscape design, installation and maintenance practices. Local
<br />agencies are required to adopt the updated MWELO, or adopt a local ordinance at least as effective as the MWELO.
<br />potable water. Water that is drinkable and meets the U.S. Environmental Protection Agency (EPA) Drinking Water Standards.
<br />See definition in the California Plumbing Code, Part 5.
<br />potable water. [HCD] Water that is satisfactory for drinking, culinary, and domestic purposes, and meets the U.S.
<br />Environmental Protection Agency (EPA) Drinking Water Standards and the requirements of the Health Authority Having
<br />Jurisdiction.
<br />recycled water. Water which, as a result of treatment of waste, is suitable for a direct beneficial use or a controlled use that
<br />would not otherwise occur [Water Code Section 13050 (n)]. Simply put, recycled water is water treated to remove waste
<br />matter attaining a quality that is suitable to use the water again.
<br />submeter. [HCD 1] A secondary device beyond a meter that measures water consumption of an individual rental unit within
<br />a multi-unit residential structure or mixed-use residential and commercial structure. (See Civic Code Section 1954.202 (g)
<br />and Water code Section 517 for additional details.)
<br />water budget. Is the estimated total landscape irrigation water use which shall not exceed the maximum applied water
<br />allowance calculated in accordance with the Department of Water Resources Model Efficient Landscape Ordinance
<br />(MWELO).
<br />5.303.4 commercial kitchen equipment.
<br />5.303.4.1 food waste disposers. Disposers shall either modulate the use of water to no more than 1 gpm when the
<br />disposer is not in use (not actively grinding food waste/no-load) or shall automatically shut off after no more than 10
<br />minutes of inactivity. Disposers shall use no more than 8 gpm of water.
<br />Note: This code section does not affect local jurisdiction authority to prohibit or require disposer installation.
<br />5.303.5 areas of addition for alteration. For those occupancies within the authority of the California Building Standards
<br />Commission as specified in Section 103, the provisions of Section 5.303.3 and 5.303.4 shall apply to new fixtures in
<br />additions or areas of alteration to the building.
<br />5.303.6 standards for plumbing fixtures and fittings. Plumbing fixtures and fittings shall be installed in accordance with
<br />the California Plumbing Code, and shall meet the applicable standards referenced in Table 1701.1 of the California
<br />Plumbing Code and in Chapter 6 of this code.
<br />section 5.304 outdoor water use
<br />5.304.1 outdoor potable water use in landscape areas. Nonresidential developments shall comply with a local water
<br />efficient landscape ordinance or the current California Department of Water Resources' Model Water Efficient Landscape
<br />Ordinance (MWELO), whichever is more stringent.
<br />Notes:
<br />1. The Model Water Efficient Landscape Ordinance (MWELO) is located in the California Code of Regulations, Title
<br />23, Chapter 2.7, Division 2.
<br />2. MWELO and supporting documents, including a water budget calculator, are available at:
<br />https://www.water.ca.gov/.
<br />5.304.6 outdoor potable water use in landscape areas. For public schools and community colleges, landscape projects
<br />as described in Sections 5.304.6.1 and 5.304.6.2 shall comply with the California Department of Water Resources Model
<br />Water Efficient Landscape Ordinance (MWELO) commencing with Section 490 of Chapter 2.7, Division 2, Title 23,
<br />California Code of Regulations, except that the evapotranspiration adjustment factor (ETAF) shall be 0.65 with an additional
<br />water allowance for special landscape areas (SLA) of 0.35.
<br />Exception: Any project with an aggregate landscape area of 2,500 square feet or less may comply with the prescriptive
<br />measures contained in Appendix D of the MWELO.
<br />5.304.6.1 newly constructed landscapes.New construction projects with an aggregate landscape area equal to or greater
<br />than 500 square feet.
<br />5.304.6.2 rehabilitated landscapes. Rehabilitated landscape projects with an aggregate landscape area equal to or greater
<br />than 1,200 square feet.
<br />division 5.4 material conservation and resource efficiency
<br />section 5.401 general
<br />5.401.1 scope.The provisions of this chapter shall outline means of achieving material conservation and resource
<br />efficiency through protection of buildings from exterior moisture, construction waste diversion, employment of techniques
<br />to reduce pollution through recycling of materials, and building commissioning or testing and adjusting.
<br />section 5.402 definitions
<br />5.402.1 definitions. The following terms are defined in Chapter 2 (and are included here for reference)
<br />adjust. To regulate fluid flow rate and air patterns at the terminal equipment, such as to reduce fan speed or adjust a
<br />damper.
<br />balance. To proportion flows within the distribution system, including sub-mains, branches and terminals, according
<br />to design quantities.
<br />building commissioning. A systematic quality assurance process that spans the entire design and construction
<br />process, including verifying and documenting that building systems and components are planned, designed, installed,
<br />tested, operated and maintained to meet the owner’s project requirements.\
<br />organic waste.Food waste, green waste, landscape and pruning waste, nonhazardous wood waste, and food
<br />test.A procedure to determine quantitative performance of a system or equipment
<br />section 5.407 water resistance and moisture management
<br />5.407.1 weather protection. Provide a weather-resistant exterior wall and foundation envelope as required by California
<br />Building Code Section 1402.2 (Weather Protection), manufacturer's installation instructions or local ordinance, whichever
<br />is more stringent.
<br />5.407.2 moisture control.Employ moisture control measures by the following methods.
<br />5.407.2.1 sprinklers.Design and maintain landscape irrigation systems to prevent spray on structures.
<br />5.407.2.2 entries and openings.Design exterior entries and/or openings subject to foot traffic or wind-driven rain to
<br />prevent water intrusion into buildings as follows:
<br />5.407.2.2.1 Exterior door protection. Primary exterior entries shall be covered to prevent water intrusion by
<br />using nonabsorbent floor and wall finishes within at least 2 feet around and perpendicular to such openings plus
<br />at least one of the following:
<br />1. An installed awning at least 4 feet in depth.
<br />2. The door is protected by a roof overhang at least 4 feet in depth.
<br />3. The door is recessed at least 4 feet.
<br />4. Other methods which provide equivalent protection.
<br />5.407.2.2.2 flashing. Install flashings integrated with a drainage plane.
<br />section 5.408 construction waste reduction, disposal and recycling
<br />5.408.1 construction waste management. Recycle and/or salvage for reuse a minimum of 65% of the non-hazardous
<br />construction and demolition waste in accordance with Section 5.408.1.1, 5.408.1.2 or 5.408.1.3; or meet a local
<br />construction and demolition waste management ordinance, whichever is more stringent.
<br />5.408.1.1 construction waste management plan. Where a local jurisdiction does not have a construction and
<br />demolition waste management ordinance, submit a construction waste management plan that:
<br />nonresidential mandatory measures sheet 1
<br />section 5.303 indoor water use
<br />5.303.1 meters.Separate submeters or metering devices shall be installed for the uses described in Sections 503.1.1 and
<br />503.1.2.
<br />5.303.1.1 buildings in excess of 50,000 square feet. Separate submeters shall be installed as follows:
<br />1. For each individual leased, rented or other tenant space within the building projected to consume more than
<br />100 gal/day (380 L/day), including, but not limited to, spaces used for laundry or cleaners, restaurant or food
<br />service, medical or dental office, laboratory, or beauty salon or barber shop.
<br />2. Where separate submeters for individual building tenants are unfeasible, for water supplied to the following
<br />subsystems:
<br />a. Makeup water for cooling towers where flow through is greater than 500 gpm (30 L/s).
<br />b. Makeup water for evaporative coolers greater than 6 gpm (0.04 L/s).
<br />c. Steam and hot water boilers with energy input more than 500,000 Btu/h (147 kW).
<br />5.303.1.2 excess consumption.A separate submeter or metering device shall be provided for any tenant within a new
<br />building or within an addition that is projected to consume more than 1,000 gal/day.
<br />5.303.3 water conserving plumbing fixtures and fittings. Plumbing fixtures (water closets and urinals) and fittings
<br />(faucets and showerheads) shall comply with the following:
<br />5.303.3.1 water closets. The effective flush volume of all water closets shall not exceed 1.28 gallons per flush. Tank-
<br />type water closets shall be certified to the performance criteria of the U.S. EPA WaterSense Specification for Tank-Type
<br />toilets.
<br />Note:The effective flush volume of dual flush toilets is defined as the composite, average flush volume of two reduced
<br />flushes and one full flush.
<br />5.303.3.2 urinals.
<br />5.303.3.2.1 wall-mounted urinals.The effective flush volume of wall-mounted urinals shall not exceed 0.125
<br />gallons per flush
<br />5.303.3.2.2 floor-mounted urinals. The effective flush volume of floor-mounted or other urinals shall not exceed
<br />0.5 gallons per flush.
<br />5.303.3.3 showerheads. [BSC-CG]
<br />5.303.3.3.1 single showerhead. Showerheads shall have a maximum flow rate of not more than 1.8 gallons per
<br />minute at 80 psi. Showerheads shall be certified to the performance criteria of the U.S. EPA WaterSense
<br />Specification for Showerheads.
<br />5.303.3.3.2 multiple showerheads serving one shower. When a shower is served by more than one showerhead,
<br />the combined flow rate of all the showerheads and/or other shower outlets controlled by a single valve shall not
<br />exceed 1.8 gallons per minute at 80 psi, or the shower shall be designed to allow only one shower outlet to be in
<br />operation at a time.
<br />Note: A hand-held shower shall be considered a showerhead.
<br />5.303.3.4 faucets and fountains.
<br />5.303.3.4.1 nonresidential lavatory faucets. Lavatory faucets shall have a maximum flow rate of not more than 0.5
<br />gallons per minute at 60 psi.
<br />5.303.3.4.2 kitchen faucets. Kitchen faucets shall have a maximum flow rate of not more than 1.8 gallons per minute
<br />at 60 psi. Kitchen faucets may temporarily increase the flow above the maximum rate, but not to exceed 2.2 gallons per
<br />minute at 60 psi, and must default to a maximum flow rate of 1.8 gallons per minute at 60 psi.
<br />5.303.3.4.3 wash fountains. Wash fountains shall have a maximum flow rate of not more than 1.8 gallons per
<br />minute/20 [rim space (inches) at 60 psi].
<br />5.303.3.4.4 metering faucets. Metering faucets shall not deliver more than 0.20 gallons per cycle.
<br />5.303.3.4.5 metering faucets for wash fountains. Metering faucets for wash fountains shall have a maximum flow rate
<br />of not more than 0.20 gallons per minute/20 [rim space (inches) at 60 psi].
<br />Note: Where complying faucets are unavailable, aerators or other means may be used to achieve reduction.
<br />5.303.3.4.6 pre-rinse spray value. When installed, shall meet the requirements in the California Code of Regulations,
<br />Title 20 (Appliance Efficiency Regulations), Section 1605.1 (h)(4) Table H-2, Section 1605.3 (h)(4)(A), and Section
<br />1607(d)(7), and shall be equipped with an integral automatic shutoff.
<br />for reference only: The following table and code section have been reprinted from the California Code of Regulations,
<br />Title 20 (Appliance Efficiency Regulations), Section 1605.1 (h)(4) and Section 1605.3 (h)(4)(A).
<br />5.106.8 light pollution reduction. [N]. Outdoor lighting systems shall be designed and installed to comply with the
<br />following:
<br />1. The minimum requirements in the California Energy Code for Lighting Zones 0-4 as defined in Chapter 10, Section
<br />10-114 of the California Administrative Code; and
<br />2. Backlight (B) ratings as defined in IES TM-15-11 (shown in Table A-1 in Chapter 8);
<br />3. Uplight and Glare ratings as defined in California Energy Code (shown in Tables 130.2-A and 130.2-B in Chapter
<br />8) and
<br />4. Allowable BUG ratings not exceeding those shown in Table 5.106.8, [N] or Comply with a local ordinance lawfully
<br />enacted pursuant to Section 101.7, whichever is more stringent.
<br />Exceptions: [N]
<br />1. Luminaires that qualify as exceptions in Sections 130.2 (b) and 140.7 of the California Energy Code.
<br />2. Emergency lighting.
<br />3. Building facade meeting the requirements in Table 140.7-B of the California Energy Code, Part 6.
<br />4. Custom lighting features as allowed by the local enforcing agency, as permitted by Section 101.8 Alternate
<br />materials, designs and methods of construction.
<br />5. Luminaires with less than 6,200 initial luminaire lumens.
<br />No. Revisions Date
<br />1 SD 06/05/2025
<br />2 DD 07/03/2025
<br />3 90% CD 08/15/2025
<br />4 Plan Check Submittal 09/19/2025
<br />12 Plan Check Resubmittal 02/25/2026
|