Laserfiche WebLink
4/27/2026 #989857 / B, C10 <br />I HEREBY CERTIFY THAT THE WORK PROPOSED TO BE DONE ON <br />THESE PLANS IS IN CONFORMANCE WITH ALL CODES AND <br />ORDINANCES OF THE AHJ OF CITY OF SANTA ANA AND FURTHER, IF <br />OMISSIONS OR ERRORS ARE DISCOVERED, I UNDERSTAND THAT THE <br />WORK PERFORMED WILL BE REQUIRED TO COMPLY WITH THE CODES <br />AND ORDINANCES OF THE AHJ OF CITY OF SANTA ANA PRIOR TO FINAL <br />BUILDING INSPECTION. <br /> SIGNATURE DATE STATE LICENSE NO. <br />PROJECT LOCATION: <br />CRYOPORT SANTA ANA PV <br />15.26KW DC / 13.86KW AC <br />1700 E GARRY AVENUE <br />SANTA ANA, CA 92705 <br />NO.DATE DESCRIPTION <br />1 <br />CONTRACTOR <br />RENEWABLE ENERGY <br />PARTNERS INC <br />198 LEWIS CT <br />CORONA, CA 92882 <br />CSLB #989857 / B, C10 <br />(855) 519-6633 <br />3/24/2026 INITIAL PLAN SET <br />ELECT. <br />A.L. <br />ARCH D (24" X 36") PRINT PAPER SIZE <br />DESCRIPTION: <br />SYSTEM INFO: <br />STATE OF CALIFORNIA <br />REGISTERED PROFESSIONAL ENGINEER <br />E 24451 <br />EXP. 12/31/2026 <br />ELECT RICAL <br />ANDREW E LOPEZ <br />PV 5 <br />GROUNDING <br />4/27/2026 1ST REVISION (RACKING)A.L. <br />RAIL TO RAIL <br />BONDING <br />#6 BARE <br />COPPER WIRE <br />INVERTER <br />(IF USED)MSP <br />CONTINUOUS <br />GROUND <br />PER SLD <br />JBOX GROUND <br />BUSHINGS <br />MODULE <br />RAIL <br />SOLAR <br />METER <br />(IF REQ) <br />(A) <br />(1) BOND STRIP GROUNDS RAIL TO <br />RAIL SPLICES - STAR WASHERS USED <br />TO BOND RAIL TO BONDING STRIP <br />(2) SPLICE BAR, SELF-TAP SCREWS <br />JOIN RAILS. BONDING STRIPS USED <br />ON RAILS WITH GROUND LUGS. <br />(1)(2) <br />(3) <br />IF SPLICE BAR HAS INTEGRATED <br />GROUND, BONDING STRIP IS <br />NOT NECESSARY. <br />(3) WHERE NEITHER BONDING STRIP, INTEGRATED <br />GROUNDING SPLICE BAR, OR INTEGRATED <br />GROUNDING MIDCLAMP ARE USED, UL 2703 <br />APPROVED GROUND LUG WITH #6 BARE COPPER <br />SHALL BE USED TO GROUND SPLICED RAILS. <br />USE METHOD (2) <br />(1) <br />(C) RAIL SPLICE GROUNDING <br />(C) <br />#6 BARE <br />COPPER <br />RAIL <br />1 <br />RAIL <br />2 <br />EITHER METHOD 1-3 PER MANUFACTURERS INSTALL INSTRUCTIONS <br />CONDUIT <br />GROUNDING <br />BUSHING <br />WHERE <br />REQUIRED <br />ENCLOSURE <br />CONTINUOUS <br />GROUND <br />STRIP <br />INSULATION <br />CONDUIT GROUNDING DETAIL <br />EQUIPMENT GROUND <br />BUSHINGS REQ. FOR <br />SYSTEMS OVER 250V <br />(A) GROUNDING MID CLAMP <br />EACH GROUNDING MID CLAMP PIERCES THROUGH THE <br />ANODIZED COATINGS OF BOTH THE MODULE FRAME AND THE <br />MOUNTING RAIL TO FORM SECURE ELECTRICAL BONDS, WHICH <br />ARE REPEATED THROUGHOUT THE ARRAY. <br />MIDCLAMP TEETH <br />MODULE PENETRATION <br />SERRATED T-BOLT BONDS <br />CLAMP TO RAIL <br />COMPRESSION <br />FITTING <br />LOCK NUT <br />WHERE REQUIRED