Laserfiche WebLink
Brasstech, Inc <br />KARDEX SHUTTLE LAYOUT PLAN <br />MODEL 500- 2450 mm x 812.8 mm x 7250 mm (96.46 in. x 32 in. x <br />8.92' I <br />I <br />N I <br />N I <br />II I <br />upporting contact <br />Cface 8 x 14000 mmz <br />Ni \ <br />6.85' <br />C'7 <br />11 <br />CV <br />M <br />u7 <br />2.42' <br />I <br />N I <br />N I <br />Personal protec_II 3 light <br />curtain holder cQ? 3ble <br />duct for multiplN :cess <br />openings 0' <br />power supply <br />2400 mm (94.49 in.) <br />Type 1 Heavy-duty <br />anchor 0 15 mm <br />(0.59 in.) <br />CITY OF SANTA ANA <br />—Ptahntng and Building kgency <br />23 feet, 9.43 i <br />Approved <br />FOR PERMIT ISSUANCE <br />205 mm (8.07") taster D: <br />X=477.7mm <br />(18.81 in.) <br />Y = 1555.5 mm <br />(61.24 in.) <br />I <br />I <br />Personal protection <br />light curtain holder <br />I <br />205 mm (8.07") <br />En •�- E� 1 <br />= (front) <br />104.7" = 8.73' <br />Unit Width: 2780 mm (109.45 in.) <br />This layout show only the basic access opening and does not account for extraction table dimensions if chosen on Kardex Shuttle POF. <br />The weight load is transferred to the supporting surfaces (unit stands) via the eight load -bearing <br />sections in the base frame. The supporting surfaces form the contact area for the entire unit. <br />(Total) Supporting Contact Surface: 173.6 in.Z (1120 cmZ) <br />X: Spacing of outer load profiles (load bearing surface) <br />Y: Spacing of inner load profiles (load bearing surface) <br />The evenness of the floor surface on which quality -assured equipment is set up — whether an unfinished <br />or finished floor— must be within the permissible tolerances: Up to 10 meter unit height, distance = 12mm (0.47 in.) <br />Unit must be anchored to the foundation <br />The front edge of the access table and the personal protection light curtain protrude the access opening by 40 mm (1.57") <br />Ln <br />ti <br />1-4 <br />E <br />IV <br />rn <br />N <br />L <br />d <br />v <br />Y_ <br />kardexremstar <br />