Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.1.29 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2026 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />7 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br /> | <br />Concrete - Mar 16, 2026 (1) <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />7 <br />4/9/2026 <br />7 Installation data <br /> Anchor type and diameter: Kwik Bolt TZ2 - CS 5/8 (4) <br /> hnom3 <br /> Profile: Rectangular HSS (AISC), HSS8X4X.125; (L x W x T) = 8.000 in. x <br /> 4.000 in. x 0.125 in. <br /> Item number: 2210272 KB-TZ2 5/8x5 1/2 <br /> Hole diameter in the fixture: df = 0.687 in. Maximum installation torque: 481 in.lb <br /> Plate thickness (input): 0.375 in. Hole diameter in the base material: 0.625 in. <br /> Recommended plate thickness: not calculated Hole depth in the base material: 4.750 in. <br /> Drilling method: Hammer drilled Minimum thickness of the base material: 6.000 in. <br /> Cleaning: Manual cleaning of the drilled hole according to instructions for use is <br /> required. <br /> Hilti Æ 5/8 in Kwik Bolt TZ2 - CS with 4.5 in nominal embedment depth per ICC-ES ESR-4266 , Hammer drill bit installation per MPII <br />7.1 Recommended accessories <br />Drilling Cleaning Setting <br />• Suitable Rotary Hammer <br />• Properly sized drill bit <br />• Manual blow-out pump • Torque controlled cordless impact tool <br />• Torque wrench <br />• Hammer <br />Coordinates Anchor [in.] <br />Anchor x y c-x c+x c-y c+y <br />1 -7.250 -6.250 ---- <br />2 7.250 -6.250 ---- <br />3 -7.250 6.250 ---- <br />4 7.250 6.250 ----