HomeMy WebLinkAbout600 W Santa Ana #111 - Plana Philadelphia Sign Company
SITE IDENTIFICATION
Santa Ana, CA 91607
600 West Santa Ana Blvd.
Bldg #101122975
APPROVALS:
PLNG - N. Liu
BLDG - A. Zuniga
--
-
-
-
-
-
-
A
B
C
E
G
D
F
H
-
-
-
-
-
-
SITE PLAN
S I T E P L A N - A E R I A L V I E W
N. T. S.
Revise location of main entrance.MAK 10 / 2 / 24FRESENIUS KIDNEY CARE No. 101454
600 W. Santa Ana Blvd. - Santa Ana, CA
9 / 12 / 24
-
C US
MAKM. Arroyo
Aerial Site Plan
--
-
-
-
-
-
-
A
B
C
E
G
D
F
H
-
-
-
-
-
-
F L O O R P L A N
N. T. S.
--FRESENIUS KIDNEY CARE No. 101454
600 W. Santa Ana Blvd. - Santa Ana, CA
9 / 12 / 24
-
C US
MAKM. Arroyo PK 2400540
Floor Plan
Proposed Illuminated Letters over Primary Entrance.
Door Vinyl on Primary Entrance Door
Door Vinyl on Primary Entrance Door
Interior Entrance Doors
Door Vinyl on Staff Entrance Door
Door Vinyl on Emergency Exit Door
Door Vinyl on Sprinkler Riser Door
Mechanical Room
Door Vinyl on Mechanical Room Door
Door Vinyl on Deliveries Door
Front Elevation
--
-
-
-
-
-
-
A
B
C
E
G
D
F
H
-
-
-
-
-
-
MAK 2 / 24 / 25FRESENIUS KIDNEY CARE No. 101454
600 W. Santa Ana Blvd. - Santa Ana, CA
9 / 12 / 24
-
C US
MAKM. Arroyo PK 2400540A
Paint Note:
Fascia color matches Sherwin Williams SW 7051 Analytical
Gray.
Internally Illuminated Face Lit Channel Letters flush mounted on EIFS fascia.
Reference Drawing for fabrication specifications.PK2400540B
ELECTRICAL NOTE:
Check for electrical power, power may have to be run behind fascia.
Scale: 3/16”=1’-0”
PRIMARY ENTRANCE - NORTHEAST ELEVATION
Reference Drawing for vinyl specifications.PK2400450F
Door vinyl on Primary Entrance.
5'
-
0
”
PRIMARY ENTRANCE - NORTHEAST ELEVATION
17’-0”
4’
-
9
”
EQ EQ
EQ
EQ
11’-11 5/8”
2’
-
8
3
/
8
”
10
"
10
"
1. Raceways are unpermitted per SAMC Sec. 41-863(e)(2). Please revise sign design.
2. Please revise size of proposed sign. Per SAMC Sec. 41-863(b)(1), the sign area of the primary elevation may not exceed 200 sf, 10% of
business elevation, or 40% of signable area, whichever is smaller. The maximum square footage of the proposed sign may not exceed sf. Per 32.3
SAMC Sec. 41-863(c), the horizontal dimension of the sign may not exceed 75% of building elevation. The maximum length of the proposed sign may
not exceed ft. 12.75
3. Per Sec. 41-851(b)(5), add a note to the plans that the proposed door vinyl signage will not exceed 25% of door frame. Please note that this
requirement only applies to exterior doors.
CODE:
NOTE:
Door vinyl signage will not exceed 25% of door frame.
Area of logo/letters = 32.29 Sq. Ft.
Reduce illum. logo/letter layout, delete raceway per city code.
--
-
-
-
-
-
-
A
B
C
E
G
D
F
H
-
-
-
-
-
-
FRESENIUS KIDNEY CARE No. 101454
600 W. Santa Ana Blvd. - Santa Ana, CA
9 / 12 / 24
-
C US
MAKM. Arroyo PK 2400540B
Reduce illum. logo/letter layout, delete raceway per city code.MAK 2 / 24 / 25
SITE IDENTIFICATION
STACKED LETTER SET LAYOUT
N. T. S.
LE
D
I
l
l
u
m
i
n
a
t
e
d
C
h
a
n
n
e
l
L
e
t
t
e
r
s
FL
U
S
H
M
O
U
N
T
E
D
R
E
M
O
T
E
Note: UL labels must be visible at all times by UL standards and local city requirements.
Note: The stacked layout is preferred when the fascia dimensions allow or sign area allowed by code is not an overriding factor.
SIGN TYPE A B C D SQ. FT.White
LL-10SBD 10”2’- 8 3/8”11’- 11 5/8”2 9/16”32.291/8”
B
C
A
A
D
VARIOUS SIZES
Border
NIGHT VIEW
COLOR SCHEDULE
White Border Weeded From Background Vinyl
Letter Faces
3M #3630-157 Sultan Blue
Illuminated Flush Mounted Letters
Stacked Version w/ Blue Faces - Preferred
H
F
G
D
Illumination
Power Supply
Back
Return
Face
LED / color
LED / color
LED / color
Type
Gauge
Material
Type
Material
Color
Depth
Material
Material
Color
Color
Vinyl
Vinyl
-
#7328 White
-
See Color Schedule
NA
3/16” Acrylic
-
Per Manufacturing
Per Manufacturing
3mm
.040 x 3.3” aluminum
White
-
ACM
White Precoat
3”
Mounting
Retainer
Switch
Electrical
Type
Type
Fastener
Color
Type
Type
Type
Location
-
Mechanical
trim cap
1/4-20NC Sleeve anchor
White
Disconnect/toggle
Pass thru
By electrician
*weep hole(s) per mfg. standards
*caulk required
*UL Listed Product
A
AB
C
SizeD
1”
E
F
G
H
I
AD
DAG
GDAF
FGDAH
A
C
E
BAB
BAI
7’- 0”
(84”)
4” x 4” J-Box behind wall.Center line of layout
*1/8” Inline Border for 8” & 10” Letters
3/16” Inline Border for 12” & 14” Letters
White
Trim Cap
Reference Drawings for fabrication specifications10LL-SBD
City of Santa Ana
Planning & Building
Agency
Access to any power
supply in attic or
above ceiling shall be
immediately from a
ladder or with a 2 x 3
foot access door &
passage with a 12-inch
walkway. CEC 600-21
(d)(d)
CITY OF SANTA ANA
Planning and Building Agency
STATE OF CALIFORNIA
Sign Lighting
Approved
CALIFORNIA E Ef16V_#'*"��IVAUANCE
CERTIFICATE OF COMPLIANCE
NRCC-LTS-E
This document is used to demonstrate compliance with requirements in 110.9, 110.12, 130.01160.5, 130.3/ 160.5(d), 140.8/ 170.2(e) and 141.0(b)2W 180.2(b)4Bvi
scopes using the prescriptive path. Exit signs and traffic signs are not required to comply with prescriptive requirements per exceptions to 140.81170.2(e) and do no
this compliance document.
for si n ligqhting
Mas r I17:
Date: a complete
a e:
Project Name: FRESENIUS
Report Page: (Page 1 of 4)
Project Address: 600 West Santa Ana Blvd #111, SANTA ANA, CA 92701.
IDate Prepared: 2025-02-28T14:17:29-05:00
A. GENERAL INFORMATION
01
Project Location (city)
SANTA ANA
02
Climate Zone
8
03
Occupancy Types within Project
❑
Healthcare Facility
❑
I Multifamily/ MF Mixed -use >= 4 stories (includes dormitory, senior living)
B. PROJECT SCOPE
This table includes illuminated signs that are within the scope of the permit application and are demonstrating compliance using the prescriptive path outlined in 140.81170.2(e) or
141.0(b)2W 180.2(b)4Bvi for alterations. Exit signs and traffic signs are not required to comply with prescriptive requirements per exceptions to 140.81170.2(e) and do not need to
complete this compliance document.
01
02
03
04
05
Name or Item Tag
Complete Sign Description
Sign Status'
Sign Type
Compliance Method
1
CHANNEL LETTER WALL SIGN
New
Outdoor
Alternate Light Sources
'FOOTNOTE: Sign alterations that increase the connected lighting load, replace and rewire more that 50% of the ballasts, or relocate the sign to a different location must comply with 140.8/ 170.2(e). See
141.0(b)2M/ 180.2(b)4Bvi for more details.
2The ENERGY VERIFIED Label compliance method is only applicable if the sign has a permanent, factory -installed, ENERGY VERIFIED label certified by UL or comparable, confirming the sign complies with
140.8/ 170.2(e). Note that using an ENERGY VERIFIED label is an optional compliance path, not a mandatory requirement. See the tooltips for this table for more details.
Generated Date/Time:
Documentation Software: Energy Code Ace
CA Building Energy Efficiency Standards - 2022 Nonresidential Compliance Report Version: 2022.0.000 Compliance ID: 277549-0225-0002
Schema Version: rev 20220101 Report Generated: 2025-02-2811:17:32
CITY OF SANTA ANA
Planning and Building Agency
STATE OF CALIFORNIA
Sign Lighting
Approved
CALIFORNIA E Erdr�Pq§SUANCE
CERTIFICATE OF COMPLIANCE
NRCC-LTS-E
Project Name: FRESENIUS
Report Page:
Page 2 of 4)
600 West Santa Ana Blvd #111, SANTA ANA , CA 92701.
Date Prepared: 2025
8T14:17:29 05:00
C. COMPLIANCE RESULTS
Results in this table are automatically calculated from data input and calculations in Tables B through H. Note: If any cell on this table says "COMPLIES with Exceptional Conditions" refer
to Table D. Exceptional Conditions for guidance or see applicable Table referenced below.
01
02
03
04
OR
05
OR
06
07
Name or Item
Complete Sign Description
Total Allowed (Watts)
Total Designed
Compliant Light
ENERGY VERIFIED
Tag
(See Table B)
(See Table F)
(Watts)
Sources
Label
Compliance Results
(See Table B)
(See Table F)
(See Table G)
(See Table H)
1
CHANNEL LETTER WALL SIGN
>_
OR
YES
OR
COMPLIES
Controls Compliance (See Table F/G/H for Details)
I COMPLIES
D. EXCEPTIONAL CONDITIONS
This table is auto filled with uneditable comments because of selections made or data entered in tables throughout the form.
E. ADDITIONAL REMARKS
This table includes remarks made by the permit applicant to the Authority Having Jurisdiction.
F. MAXIMUM ALLOWED LIGHTING POWER AND CONTROLS
This section does not apply to this project.
Generated Date/Time:
Documentation Software: Energy Code Ace
CA Building Energy Efficiency Standards - 2022 Nonresidential Compliance Report Version: 2022.0.000 Compliance ID: 277549-0225-0002
Schema Version: rev 20220101 Report Generated: 2025-02-28 11:17:32
CITY OF SANTA ANA
Planning and Building Agency
STATE OF CALIFORNIA
Sign Lighting
ADDroved
CALIFORNIA EIJE,YgUANCE
CERTIFICATE OF COMPLIANCE
NRCC-LTS-E
Project Name: FRESENIUS
Report Page:
(Page 3 of 4)
600 West Santa Ana Blvd #111, SANTA ANA , CA 92701.
1Date Prepared: 2025
9:29 05:00
G. LIGHT SOURCES AND CONTROLS
This table includes illuminated signs using the Alternate Lighting Sources compliance method per 140.8(by 170.2(e) as indicated on Table B of this compliance document. It also
demonstrates compliance with mandatory controls requirements from 130.3 / 160.5(d) by indicating control types for each sign.
01
02
03
04
05
Mandatory Controls
Field Inspector
Name or Item Tag
Complete Sign Description
Compliant Light Sources','
Demand
Shut -Off
Dimming
Response s
Pass
Fail
Astronomical
NA: Illuminated
1
CHANNEL LETTER WALL SIGN
LED + pwr supply 80%+ eff.
Time Switch
<1 hour during
❑
❑
(outdoor)
day
* NOTES: Controls with a * require a note in the space below explaining how compliance is achieved. EX: Sign within tunnel illuminated day and night, • EXCEPTION to 130.342A.
'FOOTNOTE: Dropdown choices have been abbreviated, please refer to 140.8(b) / 170.2(e) to confirm compliance with the specific light source technologies listed.
2 Authority having jurisdiction may ask for cutsheets to confirm compliance of light source.
3 Demand response controls are only required for on Electronic Message Center having anew connected lighting power load greater than 15 kW per 110.12(d).
I. DECLARATION OF REQUIRED CERTIFICATES OF INSTALLATION
Selections have been made based on information provided in this document. If any selection have been changed by permit applicant an explanation should be included in Table E.
Additional Remarks. These documents must be provided to the building inspector during construction and can be found online
Form/Title
NRCI-LTS-E - Must be submitted for all buildings
J. DECLARATION OF REQUIRED CERTIFICATES OF ACCEPTANCE
There are no forms required for this project.
Generated Date/Time:
Documentation Software: Energy Code Ace
CA Building Energy Efficiency Standards - 2022 Nonresidential Compliance Report Version: 2022.0.000 Compliance ID: 277549-0225-0002
Schema Version: rev 20220101 Report Generated: 2025-02-2811:17:32
CITY OF SANTA ANA
Planning and Building Agency
STATE OF CALIFORNIA
Sign Lighting
Approved
CALIFORNIA ENEIrzoll" CINSUANCE
CERTIFICATE OF COMPLIANCE
NRCC-LTS-E
Project Name: FRESENIUS
lReport Page:
Page 4 of 4j
Project Address: 600 West Santa Ana Blvd #111, SANTA ANA , CA 92701.
jDate Prepared: 2025
14:17:29-05:00
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
I certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
Documentation Author Signatur
Jeff Reich
Company: MALL SIGNSV
Signature Date:
Address: 12439 Magnolia Blvd #113
CEA/ HERS Certification Identification (if applicable):
City/State/Zip: North HOIIYWood,Ua. 91607
Phone: 818-764-1909
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design identified on this Certificate of Compliance (responsible designer)
3. The energy features and performance specifications, materials, components, and manufactured devices for the building design or system design identified on this Certificate of Compliance conform to the requirements
of Title 24, Part 1 and Part 6 of the California Code of Regulations.
4. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents, worksheets, calculations,
plans and specifications submitted to the enforcement agency for approval with this building permit application.
5. 1 will ensure that a completed signed copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the building, and made available to the enforcement agency for all applicable
inspections. I understand that a completed signed copy of this Certificate of Compliance is required to be included with the documentation the builder provides to the building owner at occupancy.
Responsible Designer Name:
Responsible Designer Signature:
Jeff Reich
Company:
Date Signed: 2/28 25
Address:
License:
city/state/zip: North HOII WOOd Ca. 91607
Phone: 818-764-1909
Generated Date/Time:
Documentation Software: Energy Code Ace
CA Building Energy Efficiency Standards - 2022 Nonresidential Compliance Report Version: 2022.0.000 Compliance ID: 277549-0225-0002
Schema Version: rev 20220101 Report Generated: 2025-02-28 11:17:32