Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
828 S Harbor Blvd - Plan
NOTE: MODULE DIMENSIONS ARE SHOWN IN PLANE OF ROOF BUYER ACKNOWLEDGES THAT THE SOLAR MODULES TO BE INSTALLED ON THE ROOF OF THE HOME WILL BE SUBSTANTIALLY IN THE LOCATIONS INDICATED BY THE ILLUSTRATION. BUYER: __________________________________________________ DATE: ___________________________________________________ BUYER: __________________________________________________ DATE: ___________________________________________________ N 1 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: 3.200 SCALE:DWG TITLE:PAGE #: REV.# BY DATE DESCRIPTION ORIGINAL BY: REVIEWED BY: DATE: DATE: SYSTEM LAYOUT INDIVIDUAL PLOT PLAN DESIGNER INFORMATION SUB-ARRAY INFORMATION ARRAY #1 ARRAY #2 ARRAY #3 ARRAY #4 MOD QTY TILT AZIMUTH COMMUNITY NAME BUILDER ADDRESS SITE ADDRESS SYSTEM INFORMATION ITEM QTY MFR. MODEL SYSTEM SIZE kW MODULE PCS. HANWHA Q.PEAK DUO BLK ML-G10 INVERTER PCS. ENPHASE IQ7PLUS-72-X-US ROOF TYPE 8 8 10 270 NA NA NA NA NA NA NA NA NA 828 SOUTH HARBOR BOULEVARD SANTA ANA 7 SANTA ANA, CA 92704 GRAHAM GIBSON 23.04.13 CALVIN LOTZ 23.04.13 01 MA 23.10.05 LAYOUT UPDATE PLAN 3 BUILDING 1 - TYPE 5-PLEX ELEVATION A STANDARD HOMESITE 3 8 ° ° ° ° ° ° ° ° TPO CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 UTILITY METER BANK/ MAIN SERVICE PANEL (VERIFIED BY BUILDER) AC COMBINER BOX 1 PER UNIT, GARAGE (INTERIOR) UNIT LOAD CENTER 1 PER UNIT, GARAGE (INTERIOR) SOLADECK WIRE TRANSITION BOX (UNDER ARRAY) 13'-10" ARRAY 72'-7" ARRAY 18 ' - 7 " 5' - 7 " 4'-6" 0.005318 The scope of the plans is for the installation of the solar photovoltaic system only and the approval is subject to compliance with all applicable city and state codes and regulations regarding construction. The approval of the plans does not constitute any certification of the accuracy, completeness, or building permit status of the existing buildings and structures as shown. Bldg# 101117133 Elec# 20181258 Issued 11/13/23 828 S Harbor Blvd 11/15/2023 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN NTSSPEC PAGE COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: INSTALLATION NOTES: SOLAR CONTRACTOR - 1.ALL PV ROOF ATTACHMENTS WILL BE SPACED ALONG MODULE RACKING RAILS AT NOT GREATER THAN 48" O.C. 2.ALL PV ROOF ATTACHMENTS WILL BE STAGGERED BY ROW AMONGST THE ROOF FRAMING MEMBERS, TO MAXIMUM EXTENT POSSIBLE. 3.ROOF PENETRATIONS ASSOCIATED WITH SOLAR RACKING WILL BE SEALED WITH AN APPROVED SEALANT. 4.ROOFTOP WIRE TRANSITION WILL BE INSTALLED PER MANUFACTURER'S INSTRUCTIONS. IT WILL BE FLASHED AND SEALED. 5.PV ARRAY WILL BE A MINIMUM OF 3" ABOVE THE COMPOSITE SHINGLE ROOF SURFACE. 6.THE RACKING SYSTEM AND SOLAR PV ARRAY WILL BE INSTALLED ACCORDING TO THE MANUFACTURER'S MANUAL AND INSTALLATION GUIDES. 7.MID CLAMPS REQUIRE .37 INCH (3/8") SPACE BETWEEN PV MODULES. RAILS SHALL EXTEND 2" BEYOND ARRAY. SOLAR CONTRACTOR IS RESPONSIBLE FOR PROPER RAIL LENGTH AND INSTALLATION. 8.THE MAXIMUM HEIGHT OF A SOLAR COLLECTOR SHALL BE NO MORE THAN TWO FEET, MEASURED PERPENDICULAR TO THE ROOF SURFACE, AND MY NOT EXCEED THE MAXIMUM OVERALL BUILDING HEIGHT. 9.ALL SOLAR ENERGY SYSTEM APPURTENANCES SHALL BE SCREENED TO THE MAXIMUM EXTENT POSSIBLE WITHOUT COMPROMISING THE EFFECTIVENESS OF THE SOLAR COLLECTORS, AND SHALL BE OF A COLOR SIMILAR TO THE COLOR OF THE SURFACE UPON WITH THEY ARE MOUNTED. 10.THE ADDRESS OF EACH UNIT SHALL BE VISIBLE ON THE SITE PLAN. 11.RAIL/RACKING/MOUNTING SYSTEM HAS BEEN TESTED BASED ON UL 2703 AND CLASSIFIED AS CLASS A FIRE RATED COMPONENTS. (SEE MASTER PERMIT SET AND PROVIDED SPEC SHEETS) 10.PV PANEL HAS BEEN TESTED BASED ON UL 1703. (SEE MASTER PERMIT SET AND PROVIDED SPEC SHEETS) 11.WHERE PV DISCONNECTING MEANS (ABOVE 30 VOLTS) ARE READILY ACCESSIBLE TO UNQUALIFIED PERSONS, ANY ENCLOSURE DOOR OR HINGED COVER THAT EXPOSES LIVE PARTS WHEN OPENED, IS NOW REQUIRED TO BE LOCKED OR REQUIRE A TOOL TO OPEN PER CEC 690.13(A). STRUC 1 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE INDIVIDUAL PLOT PLAN SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: INSTALLATION NOTES: SOLAR CONTRACTOR - 1.ALL PV ROOF ATTACHMENTS WILL BE SPACED ALONG MODULE RACKING RAILS AT NOT GREATER THAN 48" O.C. 2.ALL PV ROOF ATTACHMENTS WILL BE STAGGERED BY ROW AMONGST THE ROOF FRAMING MEMBERS, TO MAXIMUM EXTENT POSSIBLE. 3.ROOF PENETRATIONS ASSOCIATED WITH SOLAR RACKING WILL BE SEALED WITH AN APPROVED SEALANT. 4.ROOFTOP WIRE TRANSITION WILL BE INSTALLED PER MANUFACTURER'S INSTRUCTIONS. IT WILL BE FLASHED AND SEALED. 5.PV ARRAY WILL BE A MINIMUM OF 3" ABOVE THE COMPOSITE SHINGLE ROOF SURFACE. 6.THE RACKING SYSTEM AND SOLAR PV ARRAY WILL BE INSTALLED ACCORDING TO THE MANUFACTURER'S MANUAL AND INSTALLATION GUIDES. 7.MID CLAMPS REQUIRE .37 INCH (3/8") SPACE BETWEEN PV MODULES. RAILS SHALL EXTEND 2" BEYOND ARRAY. SOLAR CONTRACTOR IS RESPONSIBLE FOR PROPER RAIL LENGTH AND INSTALLATION. 8.THE MAXIMUM HEIGHT OF A SOLAR COLLECTOR SHALL BE NO MORE THAN TWO FEET, MEASURED PERPENDICULAR TO THE ROOF SURFACE, AND MY NOT EXCEED THE MAXIMUM OVERALL BUILDING HEIGHT. 9.ALL SOLAR ENERGY SYSTEM APPURTENANCES SHALL BE SCREENED TO THE MAXIMUM EXTENT POSSIBLE WITHOUT COMPROMISING THE EFFECTIVENESS OF THE SOLAR COLLECTORS, AND SHALL BE OF A COLOR SIMILAR TO THE COLOR OF THE SURFACE UPON WITH THEY ARE MOUNTED. 10.THE ADDRESS OF EACH UNIT SHALL BE VISIBLE ON THE SITE PLAN. 11.RAIL/RACKING/MOUNTING SYSTEM HAS BEEN TESTED BASED ON UL 2703 AND CLASSIFIED AS CLASS A FIRE RATED COMPONENTS. (SEE MASTER PERMIT SET AND PROVIDED SPEC SHEETS) 10.PV PANEL HAS BEEN TESTED BASED ON UL 1703. (SEE MASTER PERMIT SET AND PROVIDED SPEC SHEETS) 11.WHERE PV DISCONNECTING MEANS (ABOVE 30 VOLTS) ARE READILY ACCESSIBLE TO UNQUALIFIED PERSONS, ANY ENCLOSURE DOOR OR HINGED COVER THAT EXPOSES LIVE PARTS WHEN OPENED, IS NOW REQUIRED TO BE LOCKED OR REQUIRE A TOOL TO OPEN PER CEC 690.13(A). STRUC 1 PV MODULE (TYP.) TPO ROOF, INSTALLED BY OTHERS IRONRIDGE RAIL LOCATED UNDER PV ARRAY, (TYP.) 2 ARRAY PROFILE 1" = 1'-0" PV MODULE 2PV-S1 3 PV-S1 5 PV-E2 TPO ROOF, INSTALLED BY OTHERS IRONRIDGE TILT RACK ASSEMBLY LOCATED UNDER PV ARRAY, (TYP.) NEMA 3 TRANSITION BOX LOCATED UNDER PV ARRAY, (TYP.) RACKING EQUIPMENT SCHEDULE VENDOR PART DESCRIPTION PRO SOLAR FAST JACK E SERIES ATTACHMENT IRONRIDGE FIXED TILT LEG KIT IRONRIDGE XR10 RAILS - BLACK IRONRIDGE CAMO END CLAMPS, CAMO-01-M1 (BLACK) IRONRIDGE UFO MID CLAMPS IRONRIDGE RAIL CAPS - BLACK HARDWARE 516" x 3" LAG BOLT, SS HARDWARE FENDER WASHER, 516", CLEAR, SS 4 IRONRIDGE ASSEMBLY - ROOF CONNECTION 6" = 1'-0" 3 IRONRIDGE ASSEMBLY ON ROOF - RAIL CONNECTION 6" = 1'-0" 1 FLAT ROOF LAYOUT - TYPICAL 3/4" = 1'-0" IRONRIDGE RAIL POST STANDOFF 4 PV-S1 3 PV-S1 TPO ROOF, INSTALLED BY OTHERS POST STANDOFF PV MODULE IRONRIDGE RAIL POST STANDOFF 5 IRONRIDGE CLAMP DETAILS NTS A PV-S1 B PV-S1 5B DETAIL - MID CLAMP PLAN 2" = 1'-0" DETAIL - MID CLAMP FRONT 5A DETAIL - END CLAMP PLAN 2" = 1'-0" DETAIL - END CLAMP FRONT PV MODULE FRAME UFO MID CLAMP PV MODULE FRAME UFO MID CLAMP IRONRIDGE RAIL PV MODULE FRAME CAMO END CLAMP IRONRIDGE RAIL CAMO END CLAMP PV MODULE FRAME IRONRIDGE RAIL PV MODULE FRAME (BELOW) ANCHORS TO BE INSTALLED IN ROOF FRAMING - 2.14 INCHES MINIMUM EMBEDMENT 1' - 0 58" 2'-61516" STRUCTURAL ONLY www.vincise.com S T R U C T U R A L E N G I N E E R S 10.09.2023 828 S Harbor Blvd 11/15/2023 N GRAHAM GIBSON CALVIN LOTZ 23.04.13 23.04.13 SCALE:DWG TITLE:PAGE #: REV.#BY DATE DESCRIPTION ORIGINAL BY: REVIEWED BY: DATE: DATE: SITE PLAN INDIVIDUAL PLOT PLAN COMMUNITY NAME BUILDER ADDRESS SITE ADDRESS DESIGNER INFORMATION 828 SOUTH HARBOR BOULEVARD SANTA ANA, CA 92704 SANTA ANA 7 2 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: PLAN 3 ELEVATION A STANDARD BUILDING 1 - TYPE 5-PLEX HOMESITE 3 01 MA 23.10.05 LAYOUT UPDATE CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 PL A N 2 A 1/16" = 1'-0" 828 S Harbor Blvd 11/15/2023 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN NTSSPEC PAGE COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: 3 WEEB GROUNDING LUG INSTALLATION OF WEEB GROUNDING LUG LAYOUT OF WEEB GROUNDING LUGS; LOCATIONS INDICATED BY 'X' EGC FOR ARRAY WEEB GROUNDING LUG IRONRIDGE RAIL BOLT SLIDES INTO RAIL EXTRUSION ELEC 1 SELF-DRILLING SCREW IRONRIDGE RAIL IRONRIDGE INTERNAL SPLICE SELF-DRILLING SCREW 1" MIN. IRONRIDGE RAIL IRONRIDGE INTERNAL SPLICE 4 DETAIL - SPLICE CONNECTION 5 DETAIL - EXPANSION JOINT CONNECTION 1 SOLADECK PLAN VIEW W/ ONE MICRO-INVERTER BRANCH CIRCUIT ROOF PENETRATION KNOCK-OUT ENPHASE Q CABLE TO NM-B/ROMEX WIRE TRANSITION ENPHASE Q CABLE SOLADECK TRANSITION BOX STRAIN RELIEF BUSHING SOLADECK FLASHING FACTORY INSTALLED GROUND BAR 10-3 NM-B/ROMEX (TO ATTIC) PV ARRAY EGC 2 SOLADECK DETAIL - PROFILE ROOFING ENPHASE Q CABLE SOLADECK TRANSITION BOX 10-3 ROMEX IN ATTIC (PER BLDR ELEC) STRAIN RELIEF BUSHING STRAIN RELIEF BUSHING DECKING SOLADECK FLASHING BASE #10 X 1" PHILLIPS HEAD WOOD SCREW UNDER ROOFING 8-32 X 12" PHILLIPS SCREW 2/#10 BONDED SEAL WASHER APPROVED SEALANT BTW. ROOFING AND FLASHING BASE GROUND SURFACE PV AC COMBINER BOX (INTERIOR) UTILITY METER BANK/ MAIN SERVICE PANEL UNIT LOAD CENTER (INTERIOR) PER BUILDER ELECTRICIAN 6 EQUIPMENT ELEVATION 7 BLOCKING AND MOUNTING DIAGRAM 828 S Harbor Blvd 11/15/2023 *NEUTRAL CAPPED AND NOT USED **CONDUCTOR B: FIRE WALL CROSSINGS TO BE COMPLIANT WITH PER CRC 302.4.1 AND PER CBC 714.3.1.2. COMPLIANCE TO BE COORDINATED BETWEEN PV SUB-CONTRACTORS AND ARCHITECT OF RECORD. MODULE SPECIFICATIONS AND CALCULATIONS ITEM NOTE/CALCULATION UNIT DETAIL LOCATION SANTA ANA, CA 92704 TEMP, AMBIENT HIGH (Tmax)ASHRAE 2%°C 31 TEMP, AMBIENT LOW (Tmin)ASHRAE EXTREME MIN °C 2 TEMP, MODULE TEST (Ttest)MODULE SPEC °C 25 TEMP. DELTA LOW (Tdelta)Tmin-Ttest °C -23 MODULE MANUFACTURER MODULE SPEC HANWHA MODULE PART NUMBER MODULE SPEC Q.PEAK DUO BLK ML-G10 MODULE POWER STC (P)MODULE SPEC WATTS (DC)400 MODULE OPERATING VOLTAGE (Vmp)MODULE SPEC VOLTS (DC)37.13 MODULE OPEN CIRCUIT VOLTAGE (Voc)MODULE SPEC VOLTS (DC)45.30 MODULE COEF. VOLT/TEMP (Coef)MODULE SPEC (%/C°) / 100 -0.0027 MODULE MAX VOLTAGE (Vmacmod)Voc + Voc * (Td * Coeff)VOLTS (DC)48.11 MODULE OPERATING CURRENT (Imp)MODULE SPEC AMPS (DC)10.77 MODULE SHORT CIRCUIT CURRENT (Isc)MODULE SPEC AMPS (DC)11.14 MODULE MAXIMUM CURRENT (Imax)(Isc * 1.25)AMPS (DC)13.93 MINIMUM AMPACITY REQ'D. PER NEC (Imax * 1.25)AMPS (DC)17.41 SERIES FUSE RATING, MAX MODULE SPEC AMPS (DC)20 INVERTER SPECIFICATIONS AND CALCULATIONS ITEM NOTE/CALCULATION UNIT DETAIL INVERTER MAKE INVERTER SPEC ENPHASE INVERTER MODEL INVERTER SPEC IQ7PLUS-72-X-US INVERTER MAX POWER (Wac Max)INVERTER SPEC WATTS (AC)295 INVERTER INPUT VOLTAGE (Voc Max)INVERTER SPEC VOLTS (DC)60 INVERTER OUTPUT VOLTAGE (Vac NOM)INVERTER SPEC VOLTS (AC)240 INVERTER OUTPUT FREQUENCY INVERTER SPEC HERTZ 60 INVERTER OUTPUT CURRENT (Iac)INVERTER SPEC AMPS (AC)1.21 INVERTER PHASE QUANTITY INVERTER SPEC PHASE 1 COMPLIANCE INVERTER SPEC UL1741/IEEE1547 INVERTER GROUNDING INVERTER SPEC ISOLATED INVERTER QTY. MAX PER BRANCH CIRCUIT MODULE QTYbc QTY 1 BRANCH CIRCUIT OUTPUT (Imaxbc)(Iac * MODULE QTYbc)AMPS (AC)1.21 INVERTER QTY. TOTAL MODULE QTYt QTY 8 TOTAL SYSTEM OUTPUT (Imaxts)(Iac * MODULE QTYt)AMPS (AC)9.68 CONDUCTOR SIZING CALCULATIONS 1) CONDITION OF USE (COU):(AMPACITY * TEMP. DERATE * FILL DERATE) vs. REQ'D (Imax) 2) TERMINALS (TERM):AMPACITY AT TERMINALS. vs. REQ'D, (Imax * 1.25) KEY SIZE CU/AL INSULATION CALC. TYPE AMPACITY W/O DERATES TEMP. DERATE FILL DERATE RESULT (A)REQ'D (A)OCD USED (A) A #12 CU THWN-2 COU 30 0.96 1.00 28.80 1.21 TERM 25 25 1.51 20 B #10 CU NM-B COU 40 0.96 1.00 38.40 1.21 TERM 35 35 1.51 20 C #10 CU NM-B COU 40 0.96 1.00 38.40 9.68 TERM 35 35 12.10 20 CONDUCTOR SCHEDULE KEY CONDUCTORS CU/AL TYPE LOCATION TRADE A 1 #12 ENPHASE Q CABLE, 1-#6G, FREE AIR CU UL3003, DG CABLE ARRAY SOLAR B**3-#10*, 1-#10 EGC CU NM-B (ROMEX)INTERIOR SOLAR C 3-#10, 1-#10 EGC CU NM-B (ROMEX)INTERIOR SOLAR D TBD TBD THWN INTERIOR BLDR. ELEC. ELECTRICAL EQUIPMENT SCHEDULE KEY QTY MANUFACTURER MODEL NOTES TRADE 1 8 HANWHA Q.PEAK DUO BLK ML-G10 PV MODULE SOLAR 2 8 ENPHASE IQ7PLUS-72-X-US PV INVERTER SOLAR 3 1 RSTC / SOLADECK 0786-3R5 PV ROOF J-BOX, NEMA 3R SOLAR 4 1 ENPHASE IQ ENVOY ENV-IQAM1-240 PV DATA MONITOR, 240V SOLAR 5 1 ENPHASE X-IQ-AM1-240 AC COMBINER BOX SOLAR 6 1 ENPHASE TBD PV BREAKER, 1 x 20A-2P, 1 X FACTORY-INSTALLED 10A-2P, 15A-2P, OR 20A-2P BREAKER FOR MONITORING SOLAR 7 1 CUTLER-HAMMER TBD PV BREAKER, 1 X 20A-2P SOLAR 8 1 TBD TBD UNIT LOAD CENTER, 200A BUS BLDR. ELEC. 9 1 TBD TBD UTILITY METER, 1PH, 120/208V, 200A BLDR. ELEC. 10 1 TBD TBD GROUNDING ELECTRODE, UFER BLDR. ELEC. 11 1 TBD TBD 200A/2P MAIN BREAKER BLDR. ELEC. ELECTRICAL DIAGRAM 3.200 kW HOMESITE 3 GRAHAM GIBSON CALVIN LOTZ 23.04.13 23.04.13 SCALE:DWG TITLE:PAGE #: REV.#BY DATE DESCRIPTION ORIGINAL BY: REVIEWED BY: DATE: DATE: ELECTRICAL INDIVIDUAL PLOT PLAN NTS COMMUNITY NAME BUILDER ADDRESS SITE ADDRESS DESIGNER INFORMATION 828 SOUTH HARBOR BOULEVARD SANTA ANA, CA 92704 SANTA ANA 7 N G C M UTILITY METER LOCATED IN EQUIPMENT CLOSET WITH METER STACK, 1 METER PER UNIT (VERIFIED BY BUILDER) N 7 8 10 20A/2P 11 200A/2P 9 D INTERCONNECTION CALCULATIONS ITEM UNIT PANEL PANEL MFR.SQUARE D BUS RATING AMPS 200 MAIN BREAKER AMPS 200 ALLOWED PV PER NEC AMPS 40 PV OCPD USED AMPS 20 1.39A x 8(MODS) = 9.68A OF CURRENT 9.68A x 1.25 = 12.10A TIE-IN WITH A 20A/2P 2 SPACE PV BACKFEED BREAKER 3 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: EXTERIOR - GARAGEROOFINTERIOR - GARAGE G A 3 4 5 6 N (MAX)20A/2P G B 1 2 01 MA 23.10.05 LAYOUT UPDATE CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 828 S Harbor Blvd 11/15/2023 GRAHAM GIBSON CALVIN LOTZ 23.04.13 23.04.13 SCALE:DWG TITLE:PAGE #: REV.#BY DATE DESCRIPTION ORIGINAL BY: REVIEWED BY: DATE: DATE: PLACARDS & NOTES INDIVIDUAL PLOT PLAN NTS COMMUNITY NAME BUILDER ADDRESS SITE ADDRESS DESIGNER INFORMATION 828 SOUTH HARBOR BOULEVARD SANTA ANA, CA 92704 SANTA ANA 7 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: 01 MA 23.10.05 LAYOUT UPDATE INSTALLATION NOTES: SOLAR CONTRACTOR - 1.ALL PV ROOF ATTACHMENTS WILL BE SPACED ALONG MODULE RACKING RAILS AT NOT GREATER THAN 48" O.C. 2.ALL PV ROOF ATTACHMENTS WILL BE STAGGERED BY ROW AMONGST THE ROOF FRAMING MEMBERS, TO MAXIMUM EXTENT POSSIBLE. 3.ROOF PENETRATIONS ASSOCIATED WITH SOLAR RACKING WILL BE SEALED WITH AN APPROVED SEALANT. 4.ROOFTOP WIRE TRANSITION WILL BE INSTALLED PER MANUFACTURER'S INSTRUCTIONS. IT WILL BE FLASHED AND SEALED. 5.PV ARRAY WILL BE A MINIMUM OF 3" ABOVE THE COMPOSITE SHINGLE ROOF SURFACE. 6.THE RACKING SYSTEM AND SOLAR PV ARRAY WILL BE INSTALLED ACCORDING TO THE MANUFACTURER'S MANUAL AND INSTALLATION GUIDES. 7.MID CLAMPS REQUIRE .37 INCH (3/8") SPACE BETWEEN PV MODULES. RAILS SHALL EXTEND 2" BEYOND ARRAY. SOLAR CONTRACTOR IS RESPONSIBLE FOR PROPER RAIL LENGTH AND INSTALLATION. 8.THE MAXIMUM HEIGHT OF A SOLAR COLLECTOR SHALL BE NO MORE THAN TWO FEET, MEASURED PERPENDICULAR TO THE ROOF SURFACE, AND MY NOT EXCEED THE MAXIMUM OVERALL BUILDING HEIGHT. 9.ALL SOLAR ENERGY SYSTEM APPURTENANCES SHALL BE SCREENED TO THE MAXIMUM EXTENT POSSIBLE WITHOUT COMPROMISING THE EFFECTIVENESS OF THE SOLAR COLLECTORS, AND SHALL BE OF A COLOR SIMILAR TO THE COLOR OF THE SURFACE UPON WITH THEY ARE MOUNTED. 10.THE ADDRESS OF EACH UNIT SHALL BE VISIBLE ON THE SITE PLAN. 11.RAIL/RACKING/MOUNTING SYSTEM HAS BEEN TESTED BASED ON UL 2703 AND CLASSIFIED AS CLASS A FIRE RATED COMPONENTS. (SEE MASTER PERMIT SET AND PROVIDED SPEC SHEETS) 12.PV PANEL HAS BEEN TESTED BASED ON UL 1703. (SEE MASTER PERMIT SET AND PROVIDED SPEC SHEETS) ELECTRICAL NOTES: GENERAL - 1) ALL PV EQUIPMENT WILL BE TESTED AND LISTED FOR ITS USE BY A NATIONALLY RECOGNIZED TESTING LABORATORY (NRTL). 2) THE GROUNDING OF THE PHOTOVOLTAIC SYSTEM SHALL COMPLY WITH THE APPLICABLE VERSION OF THE NEC/CEC. 3) ALL GROUNDING ELECTRODE CONDUCTORS WILL BE INSTALLED IN A CONTINUOUS LENGTH EXCEPT WHERE SPLICED BY AN IRREVERSIBLE CONNECTOR OR EXOTHERMIC WELD. 4) NON-CURRENT CARRYING METAL PARTS SHALL BE CHECKED FOR PROPER GROUNDING, NOTING THAT TERMINAL LUGS BOLTED ON AN ENCLOSURE'S FINISHED SURFACE MAY BE ELECTRICALLY INSULATED BECAUSE OF PAINT/FINISH. PAINT/FINISH AT POINT OF CONTACT SHALL BE PROPERLY REMOVED. 5) ROOF PENETRATIONS WILL BE COMPLETED AND SEALED PER APPLICABLE CODE. 6) ALL CONDUCTORS WILL HAVE A 90°C RATING TO ENSURE CODE COMPLIANCE. 7) PV INVERTERS ARE TESTED AND LISTED FOR COMPLIANCE WITH RAPID SHUTDOWN REQUIREMENTS OF SECTION 690.12 OF THE CEC. SOLAR CONTRACTOR - 8) MODULE CERTIFICATIONS WILL INCLUDE UL1703, IEC61215, IEC61730. 9) CONDUIT AND CONDUCTOR SPECIFICATIONS ARE BASED ON MINIMUM CODE REQUIREMENTS. 10) RACEWAY POINT OF PENETRATION FROM EXTERIOR TO INTERIOR WILL BE SEALED TO PREVENT INGRESS OF WATER AND INSECTS. 11) MODULE AND MODULE LEVEL POWER ELECTRONICS WIRING SHALL BE LOCATED AND SECURED UNDER THE ARRAY USING SUITABLE WIRING CLIPS. WIRING SHALL NOT MAKE CONTACT WITH THE ROOF SURFACE AND SHALL BE MANAGED IN A WORKMAN-LIKE MANNER. 12) EQUIPMENT GROUNDING CONDUCTORS WILL BE SIZED IN ACCORDANCE WITH CEC 250.122. 13) CONDUCTOR TERMINATIONS WILL BE TORQUED PER DEVICE LISTING, OR MANUFACTURER'S RECOMMENDATIONS. 14) CABLE OR OTHER MEANS TO CONNECT INVERTER TO INTERNET 15) INSTALLATION SHALL BE COMPLETED IN A NEAT AND WORKMAN-LIKE MANNER. 16) SPACE REQUIREMENTS FOR ALL ELECTRICAL EQUIPMENT WILL COMPLY WITH CEC ARTICLE 110.26. SIGNAGE - 17) PV SYSTEMS SHALL BE CLEARLY MARKED IN ACCORDANCE WITH CEC ARTICLE 690 AND OTHER APPLICABLE STATE AND LOCAL CODES. 18) ALL SAFETY MARKING / PLACARDS SHALL BE PERMANENTLY ATTACHED BY ADHESIVE OR OTHER MECHANICAL MEANS. 19) MARKING / PLACARDS WILL BE METAL OR PLASTIC WITH ENGRAVED OR MACHINE PRINTED LETTERING IN COMPLIANCE WITH ANSI STANDARDS. 20) ALL WIRING/RACEWAYS/JUNCTION BOXES WILL BE MARKED "WARNING: PHOTOVOLTAIC POWER SOURCE," OR EQUIVALENT; WIRING/RACEWAYS SHALL BE MARKED EVERY 10'. CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 4 828 S Harbor Blvd 11/15/2023 CAUTION: POWER TO THIS BUILDING IS SUPPLIED BY THE UTILITY AND A SOLAR PV SYSTEM. DISCONNECTS ARE LOCATED AS SHOWN. SERVICE BY QUALIFIED PERSONNEL ONLY CONTACT: SUNNOVA ENERGY CORP 1-877-SLR-POWR 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: GRAHAM GIBSON CALVIN LOTZ 23.04.13 23.04.13 SCALE:DWG TITLE:PAGE #: REV.#BY DATE DESCRIPTION ORIGINAL BY: REVIEWED BY: DATE: DATE: PLACARDS INDIVIDUAL PLOT PLAN NTS COMMUNITY NAME BUILDER ADDRESS SITE ADDRESS DESIGNER INFORMATION 828 SOUTH HARBOR BOULEVARD SANTA ANA, CA 92704 SANTA ANA 7 9.68 TURN RAPID SHUTDOWN SWITCH TO THE "OFF" POSITION TO SHUTDOWN PV SYSTEM AND REDUCE SHOCK HAZARD IN ARRAY sola pv sstem eipped it apid stdon SOLAR ELECTRIC PV PANELS 1 PC., CEC 690.56 (C)(1)(a) NOTE: SEE MASTER SET FOR ADDITIONAL PLACARD INFORMATIONNOTE: SEE MASTER SET FOR ADDITIONAL PLACARD INFORMATION PV AC DISCONNECT 1 PC., CEC 690.13 (B) PANEL FED BY PV AND UTILITY 2 PCS., CEC 705.12 (B)(3) PHOTOVOLTAIC SYSTEM CONNECTED 1 PC., AS REQUIRED BY UTILITY WARNING: PHOTOVOLTAIC POWER SOURCE NO.OF PCS. WILL VARY, CEC 690.31 (G)(3) WARNING: ELECTRIC SHOCK HAZARD TERMINALS ON BOTH THE LINE AND LOAD SIDES MAY BE ENERGIZED IN THE OPEN POSITION PV POWER SOURCE - AC SPECS AC OPERATING VOLTAGE: V AC OPERATING CURRENT: A 1 PC., CEC 690.54 WARNING: POWER SOURCE OUTPUT CONNECTION DO NOT RELOCATE THIS OVERCURRENT DEVICE 2-3 PCS., CEC 705.12 (B)(2)(3)(b) CEC 690.13 (B) CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 01 MA 23.10.05 LAYOUT UPDATE 240 5 UTILITY METER BANK/ MAIN SERVICE PANEL UNIT LOAD CENTER (GARAGE - 1 PER UNIT) AC COMBINER BOX (GARAGE - 1 PER UNIT) PV ARRAY WITH MICROINVERTERS 828 S Harbor Blvd 11/15/2023 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN NTSSPEC PAGE COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: SPEC 10 828 S Harbor Blvd 11/15/2023 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN NTSSPEC PAGE COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: SPEC 11 828 S Harbor Blvd 11/15/2023 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN NTSSPEC PAGE COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: SPEC 1 828 S Harbor Blvd 11/15/2023 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN NTSSPEC PAGE COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: SPEC 2 828 S Harbor Blvd 11/15/2023 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN NTSSPEC PAGE COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: SPEC 3 828 S Harbor Blvd 11/15/2023 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN NTSSPEC PAGE COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: SPEC 4 XR Flush Mount System Strength Tested All components evaluated for superior structural performance. PE Certified Pre-stamped engineering letters available in most states. Class A Fire Rating Certified to maintain the fire resistance rating of the existing roof. Design Assistant Online software makes it simple to create, share, and price projects. UL 2703 Listed System Entire system and components meet newest effective UL 2703 standard. 25-Year Warranty Products guaranteed to be free of impairing defects. Built for solar’s toughest roofs. IronRidge builds dependable systems for mounting solar on homes. XR Rail® components have been tested to the limit and proven to endure extreme environments, including Florida’s high-velocity hurricane zones. Our rigorous approach has led to unique structural features, such as curved rails and reinforced flashings, and is also why our products are fully-certified, code-compliant and backed by a 25-year warranty. Datasheet © 2023 IronRidge, Inc. All rights reserved. U.S. Patents: #8,695,290; #9,819,303; #9,865,938; Others Pending. Version 2.00 XR Rails® Attachments Datasheet Design Assistant Go from rough layout to fully engineered system. For free. Go to IronRidge.com/design Resources XR100 Rail The ultimate residential solar mounting rail. • 8’ spanning capability • Heavy load capability • Clear and black finish BOSS® Bonded Splices Bonded Structural Splices connect XR Rails together. • Integrated bonding • No tools or hardware • Self-centering stop tab XR10 Rail A low-profile mounting rail for regions with light snow. • 6’ spanning capability • Moderate load capability • Clear and black finish XR1000 Rail A heavyweight mounting rail for commercial projects. • 12’ spanning capability • Extreme load capability • Clear anodized finish Replace tiles and ensure superior waterproofing. • Flat, S, & W tile profiles • Form-fit compression seal • Other tile hooks available Knockout Tile Clamps & Grounding UFO® Universal Fastening Objects bond modules to rails. • Fully assembled & lubed • Single, universal size • Clear and black finish Stopper Sleeves Snap onto the UFO to turn into a bonded end clamp. • Bonds modules to rails • Sized to match modules • Clear and black finish CAMO Bond modules to rails while staying completely hidden. • Universal end-cam clamp • Tool-less installation • Fully assembled Endorsed by FL Building Commission Flush Mount is the first mounting system to receive Florida Product approval for 2017 Florida Building Code compliance. Learn More at bit.ly/floridacert Flash, then mount rails with fast and nimble installation. • Fits between roofing nails • Easily align pilot holes • 360° orientation FlashVue® Bonding Hardware Bond and attach XR Rails to roof attachments. • T & Square Bolt options • Nut uses 7/16” socket • Assembled and lubricated HUG™ Halo UltraGrip™ Advanced flashing system adheres to top of shingles. • Foam-backed mastic seal • Multi-tiered waterproofing • Rafter and deck options FlashFoot2® Flash, then mount rails with our classic, robust design. • Twist-on Cap eases install • Wind-driven rain tested • Mill and black finish 828 S Harbor Blvd 11/15/2023 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN NTSSPEC PAGE COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: SPEC 5 828 S Harbor Blvd 11/15/2023 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN NTSSPEC PAGE COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: SPEC 6 828 S Harbor Blvd 11/15/2023 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN NTSSPEC PAGE COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: SPEC 7 828 S Harbor Blvd 11/15/2023 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN NTSSPEC PAGE COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: SPEC 8 828 S Harbor Blvd 11/15/2023 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY:DATE: REVIEWED BY:DATE: REV. #BY DATE DESCRIPTION DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN NTSSPEC PAGE COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS SANTA ANA, CA 92704 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: SPEC 9 828 S Harbor Blvd 11/15/2023 Expedited Permit Process for PV Systems - Micro-Inverter1 Expedited Permit Process for PV Systems Micro-Inverter The Solar America Board for Codes and Standards (Solar ABCs) Expedited Permit Pro- cess provides a means to differentiate systems that can be permitted quickly and easily due to their similarity with the majority of small-scale PV systems. Those systems with unique characteristics may be handled with small additions to this Expedited Permit Process or may require much more information, depending on the uniqueness of the installation. The following pages contain forms for the Micro-Inverter to use with the Expedited Per- mit Process. The Standard String, AC Module, and Supply-Side Connection forms are also available as interactive PDF files at www.solarabcs.org/permitting. In jurisdic- tions that have adopted the Expedited Permit Process for PV Systems, these forms can be filled out electronically and submitted in either printed form and via email. An elec- tronic format is used so that the supplied information is standardized and legible for the local jurisdiction. 828 S Harbor Blvd 11/15/2023 Expedited Permit Process for PV Systems — Micro-Inverter 2 Expedited Permit Process for Small-Scale PV Systems Micro-Inverter The information in this guideline is intended to help local jurisdictions and contractors identify when PV system installations are simple, needing only a basic review, and when an installation is more complex. It is likely that 50%-75% of all residential systems will comply with these simple criteria. For projects that fail to meet the simple criteria, resolution steps have been suggested to provide as a path to permit approval. Required Information for Permit: 1. Site plan showing location of major components on the property. This drawing need not be exactly to scale, but it should represent relative location of components at site (see supplied example site plan). PV arrays on dwellings with a 3’ perimeter space at ridge and sides may not need separate fire service review. 2. Electrical diagram showing PV array configuration, wiring system, overcurrent protection, inverter, disconnects, required signs, and ac connection to building (see supplied standard electrical diagram). 3. Specification sheets and installation manuals (if available) for all manufactured components including, but not limited to, PV modules, inverter(s), combiner box, disconnects, and mounting system. Step 1: Structural Review of PV Array Mounting System Is the array to be mounted on a defined, permitted roof structure? l Yes l No If No due to non-compliant roof or a ground mount, submit completed worksheet for the structure WKS1. Roof Information: 1. Is the roofing type lightweight (Yes = composition, lightweight masonry, metal, etc…)__________________________ ____________________________________________________________________________________________________ If No, submit completed worksheet for roof structure WKS1 (No = heavy masonry, slate, etc…). 2. Does the roof have a single roof covering? l Yes l No If No, submit completed worksheet for roof structure WKS1. 3. Provide method and type of weatherproofing roof penetrations (e.g. flashing, caulk).____________________________ Mounting System Information: 1. Is the mounting structure an engineered product designed to mount PV modules with no more than an 18” gap beneath the module frames? l Yes l No If No, provide details of structural attachment certified by a design professional. 2. For manufactured mounting systems, fill out information on the mounting system below: a. Mounting System Manufacturer ___________Product Name and Model#________________________________ b. Total Weight of PV Modules and Rails ___________lbs c. Total Number of Attachment Points____________ d. Weight per Attachment Point (b÷c)_________________lbs (if greater than 45 lbs, see WKS1) e. Maximum Spacing Between Attachment Points on a Rail ______________inches (see product manual for maximum spacing allowed based on maximum design wind speed) f. Total Surface Area of PV Modules (square feet)_________________ ft2 g. Distributed Weight of PV Module on Roof (b÷f)_______________ lbs/ft2 If distributed weight of the PV system is greater than 5 lbs/ft2, see WKS1. Step 2: Electrical Review of PV System (Calculations for Electrical Diagram) In order for a PV system to be considered for an expedited permit process, the following must apply: 1. PV modules, utility-interactive inverters, and combiner boxes are identified for use in PV systems. 2. The PV array is composed of 4 series strings or less per inverter. 3. The total inverter capacity has a continuous ac power output 13,440 Watts or less 4. The ac interconnection point is on the load side of service disconnecting means (690.64(B)). 5. One of the standard electrical diagrams (E1.1, E1.1a, E1.1b, or E1.1c) can be used to accurately represent the PV system. Interactive PDF diagrams are available at www.solarabcs.org/permitting. Fill out the standard electrical diagram completely. A guide to the electrical diagram is provided to help the applicant understand each blank to fill in. If the electrical system is more complex than the standard electrical diagram can effectively communicate, provide an alternative diagram with appropriate detail. 828 S Harbor Blvd 11/15/2023 E x p e d i t e d P e r m i t P r o c e s s f o r P V S y s t e m s 3 Micro-Inverter Site Plan N PLAN 3BUILDING 1 - TYPE 5-PLEX ELEVATION A STANDARD HOMESITE 3 SOLADECK WIRE TRANSITION BOX(UNDER ARRAY) UTILITY METER BANK/MAIN SERVICE PANEL (VERIFIED BY BUILDER) AC COMBINER BOX 1 PER UNIT, GARAGE (INTERIOR) UNIT LOAD CENTER 1 PER UNIT, GARAGE (INTERIOR) 12 ' - 4" 7' - 1" 17'-3" ARRAY 69-1" ARRAY 5'-1 1" 13'-10" ARRAY (TY P.) TY P. 828 S Harbor Blvd 11/15/2023 E x p e d i t e d P e r m i t P r o c e s s f o r P V S y s t e m s 4 Micro-Inverter Electrical Diagram Contractor Name, Address and Phone:One-Line Standard Electrical Diagram for Micro-Inverter PV Systems Site Name: Site Address: System AC Size: SIZE FSCM NO DWG NO REV E1.1a SCALE NTS Date: SHEET Drawn By: Checked By: DESCRIPTION OR CONDUCTOR TYPE USE-2 or PV WIRE GEC EGC X ALL THAT APPLY EXTERIOR CABLE LISTED W/ INV. THWN-2 or XHHW-2 or RHW-2 GEC EGC X ALL THAT APPLY NO DC GEC IF 690.35 SYSTEM THWN-2 or XHHW-2 or RHW-2 GEC EGC X ALL THAT APPLY TAG 1 2 3 4 5 CONDUIT AND CONDUCTOR SCHEDULE COND. GAUGE MFG MFG NUMBER OF CONDUCTORS MFG Cable MFG Cable CONDUIT TYPE N/A N/A N/A SAME SAME CONDUIT SIZE N/A N/A N/A SAME SAME DESCRIPTION PV DC or AC MODULE DC/AC INVERTER (MICRO) J-BOX (IF USED) PV ARRAY AC COMB. PANEL (IF USED) GEN METER (IF USED) AC DISCONNECT (IF USED) SERVICE PANEL TAG 1 2 3 4 5 6 7 8 PART NUMBER NOTES FOR UNUSED MODULES PUT "N/A” in BLANK ABOVE 1 1 3 2 3 EQUIPMENT SCHEDULE 2 _____ MICRO-INVERTERS IN BRANCH- CIRCUIT MOD ____ DC AC MOD ____ DC AC MOD ____ DC AC MOD ____ DC AC MOD ____ DC AC MOD ____ DC AC J-BOX 4 AC DISCO M BUILDING GROUNDING ELECTRODE G M UTILITY SERVICE MAIN SERVICE PANEL MAIN OCPD INVERTER OCPD 6 7 8 5 4 5 G SEE GUIDE APPENDIX D FOR INFORMATION ON MODULE AND ARRAY GROUNDING AC COMBINER PANEL G ____ MICRO-INVERTERS IN BRANCH- CIRCUIT 828 S Harbor Blvd 11/15/2023 E x p e d i t e d P e r m i t P r o c e s s f o r P V S y s t e m s 5 Contractor Name, Address and Phone:Notes for One-Line Standard Electrical Diagram for Single-Phase PV Systems Site Name: Site Address: System AC Size: SIZE FSCM NO DWG NO REV E1.2a SCALE NTS Date: SHEET Drawn By: Checked By: MAX POWER-POINT CURRENT (IMP) MAX POWER-POINT VOLTAGE (VMP) OPEN-CIRCUIT VOLTAGE (VOC) SHORT-CIRCUIT CURRENT (ISC) MAX SERIES FUSE (OCPD) MAXIMUM POWER (PMAX) MAX VOLTAGE (TYP 600VDC) VOC TEMP COEFF (mV/oC or %/oC ) IF COEFF SUPPLIED, CIRCLE UNITS MODULE MAKE MODULE MODEL PV MODULE RATINGS @ STC (Guide Section 5) MAX DC VOLT RATING MAX POWER @ 40oC NOMINAL AC VOLTAGE MAX AC CURRENT MAX OCPD RATING INVERTER MAKE INVERTER MODEL INVERTER RATINGS (Guide Section 4) 1) IF UTILITY REQUIRES A VISIBLE-BREAK SWITCH, DOES THIS SWITCH MEET THE REQUIREMENT? YES NO N/A 2) IF GENERATION METER REQUIRED, DOES THIS METER SOCKET MEET THE REQUIREMENT? YES NO N/A 3) SIZE PHOTOVOLTAIC POWER SOURCE (DC) CONDUCTORS BASED ON MAX CURRENT ON NEC 690.53 SIGN OR OCPD RATING AT DISCONNECT 4) SIZE INVERTER OUTPUT CIRCUIT (AC) CONDUCTORS ACCORDING TO INVERTER OCPD AMPERE RATING. (See Guide Section 9) 5) TOTAL OF ______ INVERTER OUTPUT CIRCUIT OCPD(s), ONE FOR EACH MICRO-INVERTER CIRCUIT. DOES TOTAL SUPPLY BREAKERS COMPLY WITH 120% BUSBAR EXCEPTION IN 690.64(B)(2)(a)? YES NO NOTES FOR INVERTER CIRCUITS (Guide Section 8 and 9): 1.) LOWEST EXPECT AMBIENT TEMPERATURE BASED ON ASHRAE MINIMUM MEAN EXTREME DRY BULB TEMPERATURE FOR ASHRAE LOCATION MOST SIMILAR TO INSTALLATION LOCATION. LOWEST EXPECTED AMBIENT TEMP ____oC 2.) HIGHEST CONTINUOUS AMBIENT TEMPERATURE BASED ON ASHRAE HIGHEST MONTH 2% DRY BULB TEMPERATURE FOR ASHRAE LOCATION MOST SIMILAR TO INSTALLATION LOCATION. HIGHEST CONTINUOUS TEMPERATURE ____oC 2.) 2009 ASHRAE FUNDAMENTALS 2% DESIGN TEMPERATURES DO NOT EXCEED 47oC IN THE UNITED STATES (PALM SPRINGS, CA IS 44.1oC). FOR LESS THAN 9 CURRENT-CARRYING CONDUCTORS IN ROOF-MOUNTED SUNLIT CONDUIT AT LEAST 0.5" ABOVE ROOF AND USING THE OUTDOOR DESIGN TEMPERATURE OF 47oC OR LESS (ALL OF UNITED STATES), a) 12 AWG, 90oC CONDUCTORS ARE GENERALLY ACCEPTABLE FOR MODULES WITH Isc OF 7.68 AMPS OR LESS WHEN PROTECTED BY A 12-AMP OR SMALLER FUSE.b) 10 AWG, 90oC CONDUCTORS ARE GENERALLY ACCEPTABLE FOR MODULES WITH Isc OF 9.6 AMPS OR LESS WHEN PROTECTED BY A 15-AMP OR SMALLER FUSE. NOTES FOR ARRAY CIRCUIT WIRING (Guide Section 6 and 8 and Appendix E): OCPD = OVERCURRENT PROTECTION DEVICE NATIONAL ELECTRICAL CODE®REFERENCES SHOWN AS (NEC XXX.XX) NOTES FOR ALL DRAWINGS: SIGNS–SEE GUIDE SECTION 7 SIGN FOR DC DISCONNECT SIGN FOR INVERTER OCPD AND AC DISCONNECT (IF USED) No sign necessary since 690.51 marking on PV module covers needed information AC OUTPUT CURRENT NOMINAL AC VOLTAGE SOLAR PV SYSTEM AC POINT OF CONNECTION THIS PANEL FED BY MULTIPLE SOURCES (UTILITY AND SOLAR) Notes for Micro-Inverter Electrical Diagram 828 S Harbor Blvd 11/15/2023 City of Santa Ana Building and Safety Department - Santa Ana, CA Subject:Flush-mount PV Installation on New Residences Project: Plan:3A Lot #3 # of Mod 8 828 South Harbor Blvd No. of Stories:3 Santa Ana, CA V&A Project No. 15-3457 The purpose of this letter is to provide a review of the existing single family residential development for the attachment and support of the proposed photovoltaic arrays as outlined in the drawings prepared by Sunnova for City Ventures. The limitation to our review is to the overall support and attachment of the photovoltaic array to the roof system designed by others. The gravity and lateral inpact of the proposed solar system has been accounted for in the original design for the project by the engineer of record for the development The project is to be constructed by City Ventures and has been designed by another licensed engineer per the requirements of the latest edition of the 2022 CBC as amended by the local jurisdiction. Our design includes the assumption that the structure has been designed by a California Licensed engineer and that the structure has been constructed in accordance with that design. The proposed roof structures have been designed for a top chord design dead load of 10 psf, which includes 2.5 psf PV allowance. The project has been designed for a wind exposure C, with an basic wind speed of 100 MPH. The roof is to be constructed of composition shingles. The photovoltaic array will mount flush to the roof planes with a maximum of 8" space between the bottom of the panels and the finish roofing. The proposed photovoltaic array consists of 8 modules on each roof. Roof pitches may vary between 3:12 & 5:12. Panels shall be setback a minimum of 36" from ridge lines and 19" from valleys for all orientations. The photovoltaic array rails shall run perpendicular to the roof slope. The photovoltaic array mounts shall be Unirac, Solar Mount, L-foot or equivalent and shall be installed at a spacing not more than 48” o.c. Each mount shall connected to the roof truss top chord with a minimum of (1) 5/16” diameter stainless steel lag screw with a minimum of 2-1/2” penetration into the top chord of the truss. Vertically adjacent mounts shall not bear on the same roof trusses, but should be staggered over every other truss wherever possible. Mounts should be within 12” of the ends of all rails. V I N C I & A S S O C I A T E S Structural Engineers May 30, 2023 Santa Ana 7 Multi Family Residential Development 175 E. WILBUR ROAD, STE 103 • THOUSAND OAKS, CA 91360 805.496.2100 • VinciSE.com 828 S Harbor Blvd 11/15/2023 Photovoltaic system: Santa Ana 7 Multi Residential Development for City Ventures Every truss that supports a photovoltaic array mount should be connected to the structural bearing walls with a Simpson H2.5A hurricane tie or other equivalent fastener capable of resisting uplift forces due to the array or as noted in the truss engineering reports, whichever is greater. If photovoltaic panel mounts fasten to flat 2x purlins that bear on truss top chord (in hip roof geometries, for example), those purlins shall be connected to all available truss top chords in an appropriate manner to resist uplift forces. All panel & rail connections are to be installed in accordance with the manufacturer recommendations. Our professional services have been performed using the degree of care and skill ordinarily exercised under similar circumstances by reputable engineers practicing in this locality. No other warranty, expressed or implied, is made as to the professional options included in this report. We hope this provides you with the information you need at this time. Please call us if you have any questions regarding this report. Sincerely, VINCI & ASSOCIATES James R. Vinci, S.E. License No. 82010 Cert of Auth No. 33293 SUMMARY OF ATTACHED CALCULATIONS 1.1 Design Data 1.2 Design Connection to Resist Wind Uplift 1.3 Wind Analysis for Low Rise Building V I N C I & A S S O C I A T E S Structural Engineers May 30, 2023 828 S Harbor Blvd 11/15/2023 DATE:V I N C I & A S S O C I A T E S SHEET:1.1 PROJECT:Santa Ana 7 Structural Engineers JOB NO.:19-3457 828 South Harbor Blvd 175 E. WILBUR ROAD, STE 103 • THOUSAND OAKS, CA 91360 ENGR.:JRV Santa Ana, CA 805.496.2100 • VinciSE.com CLIENT:Lennar Homes DESIGN DATA: ROOF DESIGN LOAD: ROOFING ( Concrete Tile )=12 psf SHEATHING =2 ROOF RAFTERS / TRUSS =2 MISCELLANEOUS =1 ROOF RAFTER/TRUSS DESIGN DEAD LOAD =17.0 psf CEILING & INSULATION =3.25 MISCELLANEOUS =1.25 DESIGN DEAD LOAD =21.5 psf DESIGN LIVE LOAD =20 psf DESIGN SNOW LOAD =0 psf WIND DESIGN CRITERIA: BASIC WIND SPEED =100 mph WIND EXPOSURE =C NUMBER OF STORIES =3 SOLAR MODULE Equip1 Solar Module Width:=41.1 in Solar Module Length:=74 in Solar Module Area =21.12 ft2 Solar Module Dead Load =3 psf Number of PV Modules =8 Number of Mounts to Roof =16 Maximum Spacing of Mounts =4 ft o.c. Tributary Area to Mounts 21.12 ft2 x (8 /16 ) =10.56 ft2 (Average) 4 ft oc x 74 in / 12''/ft ) / 2 =12.33 ft2 (Worst Case) Solar Module Vertical Support Point Load 12.33 ft2 x 3.00 psf =37.0 lbs TOTAL AREA OF ADDED SOLAR PANELS (3.43 ft x 6.17 ft ) X (8 Modules ) =169.0 ft2 5/30/2023 PLAN 3A Lot 3 828 S Harbor Blvd 11/15/2023 DATE:V I N C I & A S S O C I A T E S SHEET:1.2 PROJECT:Santa Ana 7 Structural Engineers JOB NO.:19-3457 828 South Harbor Blvd 175 E. WILBUR ROAD, STE 103 • THOUSAND OAKS, CA 91360 ENGR.:JRV Santa Ana, CA 805.496.2100 • VinciSE.com CLIENT:Lennar Homes DESIGN CONNECTION TO ROOF TO RESIST WIND UPLIFT REFER TO NEXT SHEET FOR UPLIFT FORCE CALCULATIONS ZONE 1 UPLIFT =-.6(3psf) Design Force = ( Uplift x (0.6) ) -.6(3psf) Net Uplift = ADD 2.00 Connections per Module (MIN) CONNECTION 8 Modules,16 Connections DETAIL Max Trib Area =ft2 HERE UPLIFT / CONN. =12.3 ft2 x 7.8 psf =96.2 lbs/conn PER 2015 NDS (TABLE 12.2A) PALLOW = 256 lbs/in x CD x Ct for (1) screw WITH 2.50'' PENETRATION INTO JOIST PALLOW = 2.50 ''x 410 lbs/in = 1024 lbs >96 lbs Therefore O.K. FACTOR OF SAFETY: F.O.S. =10.64 >1.5 Therefore O.K. ZONE 3 UPLIFT =- 0.6 (3 psf)ZONE 2 UPLIFT =-.6(3psf) Design Force = ( Uplift x (0.6) ) - 0.6 (3 psf)Design Force = ( Uplift x (0.6) ) -.6(3psf) Net Uplift = Net Uplift = 2.00 Connections per Module (MIN)2.00 Connections per Module (MIN) 8 Modules,16 Connections 8 Modules,16 Connections Max Trib Area =ft2 Max Trib Area =ft2 UPLIFT / CONN. =12.33 ft2 x UPLIFT / CONN. =12.33 ft2 x =248.8 lbs/conn =172.6 lbs/conn PER 2015 NDS (TABLE 12.2A)PER 2015 NDS (TABLE 12.2A) PALLOW = 256 lbs/in x CD x Ct PALLOW = 256 lbs/in x CD x Ct for (1) screw for (1) screw WITH 2.50'' PENETRATION INTO JOIST WITH 2.50'' PENETRATION INTO JOIST PALLOW = 2.50 ''x 409.6 lbs/in PALLOW = 2.50 ''x 410 lbs/in = 1024 lbs > = 1024 lbs > Therefore O.K.Therefore O.K. FACTOR OF SAFETY:FACTOR OF SAFETY: F.O.S. =4.12 >1.5 F.O.S. =5.93 >1.5 5/30/2023 PLAN 3A Lot 3 16.0 psf 7.8 psf 12.33 5/16 in 36.6 psf 26.3 psf 20.2 psf 14.0 psf 249 lbs 173 lbs Therefore O.K.Therefore O.K. 12.33 12.33 20.2 psf 14.0 psf 5/16 in 5/16 in 828 S Harbor Blvd 11/15/2023 DATE:V I N C I & A S S O C I A T E S SHEET:3 PROJECT:Project Structural Engineers JOB NO.:19-3457 Address 175 E. WILBUR ROAD, STE 103 • THOUSAND OAKS, CA 91360 ENGR.:JRV City, State 805.496.2100 • VinciSE.com Company Solar Wind Analysis Per ASCE 7-16 - Components and Cladding Exposure Category :C Importance Factor :1 Basic Wind Speed :100 Topographical factor :1 Flat Bldg Ht to eave :29 ft2 Bldg Ht to Ridge :34 ft Bldg L :60 ft Bldg W :40 ft Effective area :168.97 ft2 a =3 (width of edge strips, ASCE 7-16, 28.3-1) Design pressures for Componsants and cladding p =qh [(G Cp ) - (G Cpi)](pressure on component, ASCE 7-16, 30.3-1) p (min)=16 psf (ASCE 7-16, 30.2.2) qh =18.50 psf (q h = 0.00256K z K zt K d K e V 2 )(ASCE 7-16, 26.10) G Cp =External pressure coefficient (ASCE 7-16 30.3.2) Zone 1 Zone 1'Zone 2 Zone 2e Zone 2n Zone 2r Zone 3 Zone 3e Zone 3r Zone 4 Zone 5 G Cp 0.30 --0.30 0.30 0.30 -0.30 0.30 0.70 0.70 -G Cp -0.50 ---0.50 -1.24 -1.24 --1.24 -1.80 -0.80 0.00 G Cpi =0.18 or -0.18 (ASCE 7-16, 26.13-1, Enclosed Building) Components and Cladding Pressure (psf)Max Pressure =-36.62 psf Zone 1 Zone 1'Zone 2 Zone 2e Zone 2n Zone 2r Zone 3 Zone 3e Zone 3r Zone 4 Zone 5 Positive 16.00 16.00 16.00 16.00 16.00 16.00 19.69 19.69 Negative -16.00 -16.00 -26.33 -26.33 -26.33 -36.62 -21.93 -21.93 5/30/2023 828 S Harbor Blvd 11/15/2023 828 S Harbor Blvd 11/15/2023 Rev: 7/15/2021 RESIDENTIAL PHOTOVOLTAIC SOL-01 CBC 2019 Solar Photovoltaic (PV) Checklist for Detached SINGLE FAMILY RESIDENCES Only Instructions: The licensed contractor of record shall complete all sections, answer the ten questions and sign the certification section below. A copy of this form shall be attached to each of TWO sets of plans, of minimum 11” x 17” size. If answering NO to any of the questions, plan check shall be required. Project Address: 828 South Harbor Blvd., Santa Ana, CA 92704 Contractor Company Name: Sunnova Energy Corporation Contractor License Number: 1003498 YES NO Are the following applicable to the proposed project? 1. Will the PV system layout provide the required three-foot wide clear access pathways per Section 605.11 of the California Fire Code, and is this shown on the roof plan? 2. Will the PV system be installed on a roof having only one roofing layer with no overlays? 3. Will the PV array be flush mounted to the existing roof so that the plane of the modules (panels) are parallel to the plane of the roof? 4. Will the PV system weigh maximum 4 pounds per square feet or less? 5. Will the PV system be installed where the modules do not overhang any roof edges (such as eaves, gabled ends, ridges and hips)? 6. Will the PV system be installed with a space of 2” minimum to 10” maximum between the underside of modules and the surface of the roof? 7. Will the PV system be installed without using any ballast system or counter-weight system? 8. Will the anchors be installed with a maximum horizontal anchor spacing of 6 feet and is this maximum horizontal spacing shown on the plans? 9. Will the minimum 5/16” lag screws be installed with a minimum of 2-1/2 inch embedment into roof rafters (with pre-drilled holes) and is this minimum embedment shown on the plans? 10. Are ALL the structural pages of the plans stamped and signed by a California licensed professional engineer? (including project specific site plan, PV layout, anchorage spacing, anchorage details and manufacturer’s PV support information.) I certify under penalty of perjury under the laws of the State of California that the above is true: Print Name: Signature: Phone Number: Date: Email Address: Planning & Building Agency Building Safety Division 20 Civic Center Plaza P.O. Box 1988 (M-19) Santa Ana, CA 92702 (714) 647-5800 www.santa-ana.org x x x x x x x x x x Vanessa Gallardo 714-833-4483 vanessa.gallardo@sunnova.com 10/17/23 828 S Harbor Blvd 11/15/2023 828 S Harbor Blvd 11/15/2023 COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS 828 SOUTH HARBOR BOULEVARD SANTA ANA, CA 92704 SYSTEM INFORMATION SYSTEM SIZE 3.200kW 2.320kWac ITEM QTY MFR. MODEL MODULE 8 PCS. HANWHA Q.PEAK DUO BLK ML-G10 INVERTER 8 PCS. ENPHASE IQ7PLUS-72-X-US ROOF TYPE NOTE: MODULE DIMENSIONS ARE SHOWN IN PLANE OF ROOF BUYER ACKNOWLEDGES THAT THE SOLAR MODULES TO BE INSTALLED ON THE ROOF OF THE HOME WILL BE SUBSTANTIALLY IN THE LOCATIONS INDICATED BY THE ILLUSTRATION. BUYER: __________________________________________________ DATE: ___________________________________________________ BUYER: __________________________________________________ DATE: ___________________________________________________ N SUB-ARRAY INFORMATION ARRAY #1 ARRAY #2 ARRAY #3 ARRAY #4 ARRAY #5 MOD QTY 8 NA NA NA NA TILT 10 NA NA NA NA AZIMUTH 180 NA NA NA NA FLAT ROOF CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY: GRAHAM GIBSON DATE: 23.04.13 REVIEWED BY: CALVIN LOTZ DATE: 23.04.13 REV. # BY DATE DESCRIPTION 01 MA 23.10.05 LAYOUT UPDATE 02 MA 23.11.09 AS BUILT DWG TITLE:PAGE # SCALE: INDIVIDUAL PLOT PLAN 1 SYSTEM LAYOUT PLAN 3 ELEVATION A - STANDARD BUILDING 1 - TYPE 5 - PLEX HOMESITE 3 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: UTILITY METER BANK/ MAIN SERVICE PANEL (VERIFIED BY BUILDER) AC COMBINER BOX 1 PER UNIT, GARAGE (INTERIOR) UNIT LOAD CENTER 1 PER UNIT, GARAGE (INTERIOR) SOLADECK WIRE TRANSITION BOX (UNDER ARRAY) 13 ' - 1 0 " A R R A Y 18'-7" 37'-2" 12'-0" 3 ' - 1 1 " 1/16" = 1'-0" STRUCTURAL ONLY www.vincise.com S T R U C T U R A L E N G I N E E R S 11.13.2023 REVISION TO: Bldg# 101117133 Issued 11/13/23 Bldg# 101117484 Issued 11/20/23 Layout change The scope of the plans is for the installation of the solar photovoltaic system only and the approval is subject to compliance with all applicable city and state codes and regulations regarding construction. The approval of the plans does not constitute any certification of the accuracy, completeness, or building permit status of the existing buildings and structures as shown. 828 S Harbor Blvd 11/20/2023 COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS 828 SOUTH HARBOR BOULEVARD SANTA ANA, CA 92704 N CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 DESIGNER INFORMATION ORIGINAL BY: GRAHAM GIBSON DATE: 23.04.13 REVIEWED BY: CALVIN LOTZ DATE: 23.04.13 REV. #BY DATE DESCRIPTION 01 MA 23.10.05 LAYOUT UPDATE 02 MA 23.11.09 AS BUILT DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN 2SITE PLAN PLAN 3 ELEVATION A - STANDARD BUILDING 1 - TYPE 5 - PLEX HOMESITE 3 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: 1/32" = 1'-0" STRUCTURAL ONLY www.vincise.com S T R U C T U R A L E N G I N E E R S 11.13.2023 828 S Harbor Blvd 11/20/2023 CAUTION: POWER TO THIS BUILDING IS SUPPLIED BY THE UTILITY AND A SOLAR PV SYSTEM. DISCONNECTS ARE LOCATED AS SHOWN. SERVICE BY QUALIFIED PERSONNEL ONLY CONTACT: SUNNOVA ENERGY CORP 1-877-SLR-POWR 11.12 CA License #: 1003498 Classification: B, C10, C46 Namaste Solar Electric 888 Federal Boulevard Denver, CO 80204 Designer: Owner: Sunnova Energy Corporation 6531 Irvine Center Dr. #200 Irvine, CA 92618 208 DESIGNER INFORMATION ORIGINAL BY: GRAHAM GIBSON DATE: 23.04.13 REVIEWED BY: CALVIN LOTZ DATE: 23.04.13 REV. #BY DATE DESCRIPTION 01 MA 23.10.05 LAYOUT UPDATE 02 MA 23.11.09 AS BUILT DWG TITLE:PAGE #SCALE: INDIVIDUAL PLOT PLAN 5 NTSPLACARDS COMMUNITY NAME SANTA ANA 7 BUILDER ADDRESS SITE ADDRESS 828 SOUTH HARBOR BOULEVARD SANTA ANA, CA 92704 PV AC DISCONNECT 1 PC., CEC 690.13 (B) PANEL FED BY PV AND UTILITY 2 PCS., CEC 705.12 (B)(3) PHOTOVOLTAIC SYSTEM CONNECTED 1 PC., AS REQUIRED BY UTILITY WARNING: PHOTOVOLTAIC POWER SOURCE NO.OF PCS. WILL VARY, CEC 690.31 (G)(3) WARNING: ELECTRIC SHOCK HAZARD TERMINALS ON BOTH THE LINE AND LOAD SIDES MAY BE ENERGIZED IN THE OPEN POSITION PV POWER SOURCE - AC SPECS AC OPERATING VOLTAGE: V AC OPERATING CURRENT: A 1 PC., CEC 690.54 WARNING: POWER SOURCE OUTPUT CONNECTION DO NOT RELOCATE THIS OVERCURRENT DEVICE 2-3 PCS., CEC 705.12 (B)(2)(3)(b) CEC 690.13 (B) TURN RAPID SHUTDOWN SWITCH TO THE "OFF" POSITION TO SHUTDOWN PV SYSTEM AND REDUCE SHOCK HAZARD IN ARRAY sola pv sstem eipped it apid stdon SOLAR ELECTRIC PV PANELS 1 PC., CEC 690.56 (C)(1)(a) 6531 IRVINE CENTER DR. #200 IRVINE, CA 92618 CITY VENTURES: UTILITY METER BANK/ MAIN SERVICE PANEL UNIT LOAD CENTER (GARAGE - 1 PER UNIT) AC COMBINER BOX (GARAGE - 1 PER UNIT) PV ARRAY WITH MICROINVERTERS 828 S Harbor Blvd 11/20/2023