The URL can be used to link to this page

Home My WebLink About1620 E 1st St Unit A - Plan55'-10" 18 ' - 9 " Address: 1620 E. 1st St. Santa Ana, Ca. 92701 20'-6"3'-0" 3' - 0 " 75.28 sq ft. Wood/Stucco wall 120v/20 amp dedicated circuit .040 Aluminum Return 3/4” Trimp Cap 3/14 Acrylic face with vinyl overlay LED Module 1/4” Lag Screw(4 min) 1/4” Weep hole 12V Power Supply with cut oﬀ switch 4.00” 6217 Columbus Ave. Van Nuys, Ca. 91411 Lic.# 1090850 Customer Project La Victoria Cocina Mexicana WALL BRANDING 1620 E. 1st St. #A Santa Ana, Ca, 92701. SHEET 1 2' - 1 1 1 / 4 " 1' - 1 1" Sign A N 6217 Columbus Ave. Van Nuys, Ca. 91411 Lic.# 1090850 Customer Project La Victoria Cocina Mexicana WALL BRANDING 1620 E. 1st St. #A Santa Ana, Ca, 92701. SHEET 2 Unit A E. 1st St S. L yo n S t . CA Building Energy Efficiency Standards - 2019 Nonresidential Compliance:http://www.energy.ca.gov/title24/2019standards March 2021 STATE OF CALIFORNIA Sign Lighting NRCC-LTS-E (Created 03/2021) CALIFORNIA ENERGY COMMISSION Page 1 of 4 CERTIFICATE OF COMPLIANCE NRCC-LTS-E This document is used to demonstrate compliance with requirements in §110.9,§110.12,§130.0,§130.3,§140.8, and §141.0(b)2M for sign lighting scopes using the prescriptive path. Exit signs and traffic signs are not required to comply with prescriptive requirements per exceptions to §140.8 and do not need to complete this compliance document. Project Name:La Victoria Cocina Mexicana Report Page: Project Address:1620 E. 1st St.Date Prepared:3/4/2026 A. GENERAL INFORMATION 01 Project Location (city)Santa Ana 02 Climate Zone 88 03 Building is a healthcare facility B. PROJECT SCOPE Table Instructions: Include any illuminated signs that are within the scope of the permit application and are demonstrating compliance using the prescriptive path outlined in § 140.8 or §141.0(b)2M for alterations. Exit signs and traffic signs are not required to comply with prescriptive requirements per exceptions to §140.8 and do not need to complete this compliance document. WARNING: Changing the Compliance Method in this table will result in the deletion of data previously input. If you need to change the compliance method, please open a new form or use "Save As". 01 Name or Item Tag 02 Complete Sign Description 03 Sign Status¹ 04 Sign Type 05 Compliance Method² New sign internally illuminated channel letter NewNew OutdoorOutdoor Max Allowed Lighting PowerMax Allowed Lighting Power ¹FOOTNOTE: Sign alterations that increase the connected lighting load, replace and rewire more than 50% of the ballasts, or relocate the sign to a different location must comply with §140.8. See §141.0(b)2M for more details. ²The ENERGY VERIFIED Label compliance method is only applicable if the sign has a permanent, factory-installed, ENERGY VERIFIED label certified by UL or comparable, confirming the sign complies with §140.8. Note that using an ENERGY VERIFIED label is an optional compliance path, not a mandatory requirement. See the tool tips for this table for more details. C. COMPLIANCE RESULTS Table Instructions: If any cell on this table says "DOES NOT COMPLY" or "COMPLIES with Exceptional Conditions" refer to Table D. for guidance. Name or Item Tag (See Table B) 01 (See Table B) Complete Sign Description 02 (See Table F) Total Allowed (Watts) 03 ≥ (See Table F) Total Designed (Watts) 04 OR (See Table G) Compliant Light Sources 05 OR (See Table H) ENERGY VERIFIED Label 06 Compliance Results 07 New sign internally illuminated channel letter 903.36 ≥485 OR OR COMPLIES Controls Compliance (See Table F/G/H for Details)COMPLIES with Exceptional Conditions CA Building Energy Efficiency Standards - 2019 Nonresidential Compliance:http://www.energy.ca.gov/title24/2019standards March 2021 STATE OF CALIFORNIA Sign Lighting NRCC-LTS-E (Created 03/2021) CALIFORNIA ENERGY COMMISSION Page 2 of 4 CERTIFICATE OF COMPLIANCE NRCC-LTS-E Project Name:La Victoria Cocina Mexicana Report Page: Project Address:1620 E. 1st St.Date Prepared:3/4/2026 D. EXCEPTIONAL CONDITIONS This table is auto-filled with uneditable comments because of selections made or data entered in tables throughout the form. Table F. Maximum Allowed Lighting Power and Controls Permit Applicant Notes: New sign: MEETS MAXIMUM ALLOWED POWER E. ADDITIONAL REMARKS This table includes remarks made by the permit applicant to the Authority Having Jurisdiction. F. MAXIMUM ALLOWED LIGHTING POWER AND CONTROLS Table Instructions: Complete this table for illuminated signs using the Maximum Allowed Lighting Power compliance method per §140.8(a)as indicated on Table B of this compliance document. Also demonstrate compliance with mandatory controls requirements from §130.3 by indicating control types for each sign. 01 Name or Item Tag 02 Complete Sign Description 03 Illumination Method 04 Sign Area (ft²) 05 Allowed Density (W/ft²) 06 Allowance (Watts) 07 Design Watts 08 Shut-Off Dimming Demand Response¹ Mandatory Controls 09 Field Inspector Pass Fail New sign internally illuminated channel letter InternallyInternally 75.28 12 903.36 485 Auto Timer + PhotocontrolAuto Timer + Photocontrol Exempt*Exempt*NANA *NOTE: Controls with a * require a note in the space below explaining how compliance is achieved. EX: Sign within tunnel illuminated day & night; EXCEPTION to §130.3(a)2A. New sign MEETS MAXIMUM ALLOWED POWER ¹ FOOTNOTES: Demand response controls are only required for an Electronic Message Center having a new connected lighting power load greater than 15 kW per §110.12(d). G. LIGHT SOURCES AND CONTROLS This Section Does Not Apply H. ENERGY VERIFIED LABELED SIGNS AND CONTROLS This Section Does Not Apply CA Building Energy Efficiency Standards - 2019 Nonresidential Compliance:http://www.energy.ca.gov/title24/2019standards March 2021 STATE OF CALIFORNIA Sign Lighting NRCC-LTS-E (Created 03/2021) CALIFORNIA ENERGY COMMISSION Page 3 of 4 CERTIFICATE OF COMPLIANCE NRCC-LTS-E Project Name:La Victoria Cocina Mexicana Report Page: Project Address:1620 E. 1st St.Date Prepared:3/4/2026 I. DECLARATION OF REQUIRED CERTIFICATES OF INSTALLATION Table Instructions: Selections have been made based on information provided in previous tables of this document. If any selection needs to be changed, please explain why in Table E. Additional Remarks. These documents must be provided to the building inspector during construction and can be found online at https://www.energy.ca.gov/ title24/2019standards/2019_compliance_documents/Nonresidential_Documents/NRCI/ YES NO Form/Title Field Inspector Pass Fail NRCI-LTS-01-E - Must be submitted for all buildings. J. DECLARATION OF REQUIRED CERTIFICATES OF ACCEPTANCE There are no Certificates of Acceptance applicable to sign lighting requirements. CA Building Energy Efficiency Standards - 2019 Nonresidential Compliance:http://www.energy.ca.gov/title24/2019standards March 2021 STATE OF CALIFORNIA Sign Lighting NRCC-LTS-E (Created 03/2021) CALIFORNIA ENERGY COMMISSION Page 4 of 4 CERTIFICATE OF COMPLIANCE NRCC-LTS-E Project Name:La Victoria Cocina Mexicana Report Page: Project Address:1620 E. 1st St.Date Prepared:3/4/2026 DOCUMENTATION AUTHOR'S DECLARATION STATEMENT I certify that this Certificate of Compliance documentation is accurate and complete Documentation Author Name: Samuel Sanchez Documentation Author Signature: Company: Avatar sign Signature Date: 12/11/2025 Address: 6217 Columbus Ave,CEA/ HERS Certification Identification (if applicable): City/State/Zip: Van Nuys, Ca. 91411 Phone: 7144001012 RESPONSIBLE PERSON'S DECLARATION STATEMENT I certify the following under penalty of perjury, under the laws of the State of California: 1.The information provided on this Certificate of Compliance is true and correct. 2.I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design identified on this Certificate of Compliance (responsible designer) 3.The energy features and performance specifications, materials, components, and manufactured devices for the building design or system design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of Regulations. 4.The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application. 5.I will ensure that a completed signed copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the building, and made available to the enforcement agency for all applicable inspections. I understand that a completed signed copy of this Certificate of Compliance is required to be included with the documentation the builder provides to the building owner at occupancy. Responsible Designer Name: Samuel Sanchez Responsible Designer Signature: Samuel Sanchez Company : Avatar Sign Date Signed: 12/11/2025 Address: 6217 Columbus Ave.License: 1090850 City/State/Zip: Van Njys, Ca. 91411 Phone: 818-275-2336