HomeMy WebLinkAbout182422_2_Corrections.docxRESIDENTIAL PLAN CHECK
COMMENTS
Planning & Building Agency
Building Safety Division
20 Civic Center Plaza
P.O. Box 1988 (M-19)
Santa Ana, CA 92702
(714) 647-5800
www.santa-ana.org
PLAN CHECK NO:
10177674 ~ 77
PROJECT ADDRESS:
501 E 5thSt., 602 E 6thSt., 615 E 5th St., 712 E 5th St.
PLAN CHECK ENGINEER:
Kwak, JasonTEL:714
647-5866FAX:714
647-5897
TYPE OF CONSTRUCTION:
V B
OCCUPANCY CLASSIFICATION(S):
U
PLAN CHECK DATES:
REMARKS/RECHECK ITEMS:
APPLICATION
11/19/2012
INITIAL REVIEW
11/19/2012
EXPIRATION
5/18/2013
RECHECKS:
1.
PROJECT APPLICANT CONTACT PERSON:
2.
Marie Debor
3.
TEL:
(949)660-7272
FAX:
(949)660-7273
VALUATION: $8,000.00
EMAIL:
mdebor@related.com
FLOOD ZONE: X-0602320276J
Note: Numbers in parenthesis (unless otherwise noted) refer to code sections of the 2010 California Residential Code (CRC); 2010 California Building Code (CBC); CMC = 2010 California Mechanical Code; CPC = 2010 California Plumbing Code; CEC = 2010 California Electrical Code; T = Table; ICC = International Code Council.All items noted on this plan check report must be addressed. If you feel that an item is not applicable to your project, note “N/A” and discuss the reason with the plan checker.Please indicate the sheet number and detail to the right of each correction, or note the number on the plans where the correction is made. Resubmit marked original, calculations and this correction sheet. A separate sheet for response may be used.Resubmit 3corrected sets of plans.Meetings between the project applicant/designer and the plan reviewer shall be by appointment only. Please call (714) 647-5866 for an appointment.
All drawings and supporting documents shall be prepared, stamped, and signed by a California licensed architect or registered professional engineer. (CRC R301.1.3, CBC 107.1 and 107.3.4.1).
This review does not include mechanical, plumbing or electrical work. Separate plans, applications, fees, plan checks, and permits are required for mechanical, plumbing, and electrical work. Call 647-5800 for information.
The applicant shall obtain clearances/approvals for the following, prior to building permit issuance:
-Planning Division approval on the corrected/final set of drawings (647-5804). Previously
approved plans should be submitted to expedite the process.
-Police Department approval on the corrected/final set of drawings (647-5840).
-Proof of Worker's Compensation Insurance shall be required at the time of permit issuance.
Provide building information on plans:
- Building area
- Occupancy type: U
- Construction type: Type V – B
- Fire sprinklered: Yes / No
Provide building setbacks to finish of exterior walls to all property lines on site plan.
Provide eave / overhang / projection setback to all property lines on site plan.Minimum setback for carports or open structures is five feet from property line.Projections of dwelling units and accessory buildings without an automatic residential fire sprinkler protection are not permitted less than 2 feet to the property line and are required to be 1 hour fire rated on the underside with a fire separation distance between 2 feet and 5 feet. (CRC Table R302.1 (1)) Revise Detail A on Sheets S-1 to show 4:12 slope to match framing plans and calculations.Provide copy of soils report for use of 2000 psf allowable soil bearing pressure and 300 psf allowable lateral bearing pressure.Cover sheet of plans titled “Wood trim for carports” shows lattice being added to carports. Project engineer of record approval, including stamp and signature required for any alterations to carport design.All wood framing members that rest on concrete or masonry exterior foundation walls and are less than 8” to the exposed ground shall be pressure treated or naturally durable to decay. (CRC R317.1 (2))