Loading...
HomeMy WebLinkAbout209631_1_Corrections.docxTENANT IMPROVEMENT PLAN CHECK COMMENTS COMMENTS Planning & Building Agency Building Safety Division 20 Civic Center Plaza P.O. Box 1988 (M-19) Santa Ana, CA 92702 (714) 647-5800 www.santa-ana.org PLAN CHECK NO: 10186400 PROJECT ADDRESS: 2610 S Birch St PLAN CHECK ENGINEER: Mazarji, ZacTEL:714 647-5831FAX:714 647-5897 TYPE OF CONSTRUCTION: III B, SPK OCCUPANCY CLASSIFICATION(S): S-2 PLAN CHECK DATES: REMARKS/RECHECK ITEMS: APPLICATION 9/1/2015 INITIAL REVIEW 9/2/2015 EXPIRATION 2/28/2016 RECHECKS: 1. PROJECT APPLICANT CONTACT PERSON: 2. Ronald McCurry 3. TEL: (909)268-8143 FAX: VALUATION:$2,000.00 EMAIL: rmccurry@rexfordindustrial.com FLOOD ZONE:X-0602320278J APPLICABLE CODE: 2013 CALIFORNIA BUILDING CODE (CBC) WITH CITY OF SANTA ANA AMENDMENTS(When meeting is needed) Meetings between the project applicant/designer and the plan reviewer shall be by appointment only. Please call (714) 647-5831 for an appointment.Please return marked up set of drawings with corrections. Resubmit 3 corrected sets of plans.This review does not include mechanical, plumbing, fire sprinkler system, or electrical work. Separate plans, applications, fees, plan checks, and permits are required for mechanical, plumbing, fire sprinkler systems, and electrical work. Call 647-5800 for information.The applicant shall obtain clearances/approvals for the following prior to building permit issuance: - Planning Division approval on the corrected/final set of drawings (647-5804.) Previously approved plans should be submitted to expedite the process. - Proof of Worker’s Compensation Insurance shall be required at the time of permit issuanceProvide drawings to show stairway compliance with Sections 1009.7.2, Guards section 1013, Handrail, 1009.15 and Division 5 of 2013 CBC.Submit structural calculations for design and justification of stairs, handrail and guards. Incorporate results into drawings prior to resubmittal. Please refer to red marks on the drawings for additional plan check comments. Revise drawings to show compliance.