HomeMy WebLinkAbout213702_5_Corrections.docxTENANT IMPROVEMENT
PLAN CHECK COMMENTS
COMMENTS
Planning & Building Agency
Building Safety Division
20 Civic Center Plaza
P.O. Box 1988 (M-19)
Santa Ana, CA 92702
(714) 647-5800
www.santa-ana.org
PLAN CHECK NO:
10187847
PROJECT ADDRESS:
1935 E Seventeenth St Unit# D
PLAN CHECK ENGINEER:
Heidari, Fred/Nabil ChehadeTEL:714
647-5862/647-5848FAX:714
647-5897
TYPE OF CONSTRUCTION:
V B, SPK
OCCUPANCY CLASSIFICATION(S):
B
PLAN CHECK DATES:
REMARKS/RECHECK ITEMS:
APPLICATION
1/5/2016
INITIAL REVIEW
1/21/2016
EXPIRATION
7/3/2016
RECHECKS:
1.
PROJECT APPLICANT CONTACT PERSON:
2.
Liging Xu
3.
TEL:
(818)506-2555
FAX:
VALUATION:$5,000.00
EMAIL:
FLOOD ZONE:X-0602320164J
APPLICABLE CODE: 2013 CALIFORNIA BUILDING CODE (CBC) WITH
CITY OF SANTA ANA AMENDMENTS
All items noted on this plan check report must be addressed. If you feel that an item is not applicable to your project, note “N/A” and discuss the reason with the plan checker.Please indicate the sheet number and detail to the right of each correction, or note the number on the plans where the correction is made. Resubmit marked original, calculations and this correction sheet. A separate sheet for response may be used.Recheck will be done by appointment. Please call (714) 647-5862 to make an appointment.This review does not include mechanical, plumbing, fire sprinkler system, or electrical work. Separate plans, applications, fees, plan checks, and permits are required for mechanical, plumbing, fire sprinkler systems, and electrical work. Call 647-5800 for information.The applicant shall obtain clearances/approvals for the following prior to building permit issuance:
- Planning Division approval on the corrected/final set of drawings (647-5804.) Previously approved plans
should be submitted to expedite the process.
- Public Works Agency approval (647-5039)The detail on the lower left corner of sheet 2 is for a metal stud. Please revise(this detail is now shown as detail 10 on sheet 2 for a hard lid ceiling, there is no hard lid ceiling as part of this project. If there is, it needs to be called out on the plans.)Please insert/replace the revised set in the plans.Sheet 1 is still showing the posts that were eliminated on the rest of the plans. Please make sure it is clarified on the last set.