Loading...
HomeMy WebLinkAbout214253_2_Corrections.docxRESIDENTIAL PLAN CHECK COMMENTS Planning & Building Agency Building Safety Division 20 Civic Center Plaza P.O. Box 1988 (M-19) Santa Ana, CA 92702 (714) 647-5800 www.santa-ana.org PLAN CHECK NO: 10288018 PROJECT ADDRESS: 2206 S Maple St PLAN CHECK ENGINEER: Chehade, NabilTEL:714 647-5848FAX:714 647-5897 TYPE OF CONSTRUCTION: V B OCCUPANCY CLASSIFICATION(S): R-3, U PLAN CHECK DATES: REMARKS/RECHECK ITEMS: APPLICATION 1/28/2016 INITIAL REVIEW 3/21/2016 EXPIRATION 7/26/2016 RECHECKS: 1. PROJECT APPLICANT CONTACT PERSON: 2. Francisco Escobar 3. TEL: (714)222-3674 FAX: VALUATION:$9,543.90 EMAIL: FLOOD ZONE:X-0602320278J Note: Numbers in parenthesis (unless otherwise noted) refer to code sections of the 2007 California Building Code (CBC); MC = 2007 California Mechanical Code; PC = 2007 California Plumbing Code; EC = 2007 California Electrical Code; T = Table; ICC = International Code Council.Meetings between the project applicant/designer and the plan reviewer shall be by appointment only. Please call (714) 647-5848 for an appointment.All persons preparing plans for others shall sign those plans. Business and Professions Code Chapter 3, Division 3, Section 5536.1 (a). Exterior walls of detached garage/carport less than 5 feet from property line shall have one-hour fire-resistive construction on the exterior side with openings complying with 704.( 7/8) ‘’ sticco alone is not enough to make the wall 1 hr, you need to provide 5/8 type X drywall on the inside for the assembly to be 1-hr. Rafter ties spaced 4 ft. (max.) on center are required immediately above ceiling joists which are not parallel to the rafters. (2308.10.4) But your ceiling joists as shown have one side located below the rafters; either change it to connect to the rafter, or add a tie connected to the rafter, or frovide a detail at the location where it is below the rafter to be able to suppot the rater. Provide a framing and foundation plan for the patio cover, show sizes of all memebers.( it appears one footing and one post is missing, if the intention is to have the 6x6 cantilevered, it should be designed as such). Otherwise, add the footing at the edge of the patio and the 6X6. Show the spacing of the 6X6 posts on plans.