HomeMy WebLinkAbout227896_3_Corrections.docxTENANT IMPROVEMENT
PLAN CHECK COMMENTS
COMMENTS
Planning & Building Agency
Building Safety Division
20 Civic Center Plaza
P.O. Box 1988 (M-19)
Santa Ana, CA 92702
(714) 647-5800
www.santa-ana.org
PLAN CHECK NO:
10192224
PROJECT ADDRESS:
1505 E Warner Ave
PLAN CHECK ENGINEER:
Heidari, FredTEL:714
647-5862FAX:714
647-5897
TYPE OF CONSTRUCTION:
V B, SPK
OCCUPANCY CLASSIFICATION(S):
B, F-1
PLAN CHECK DATES:
REMARKS/RECHECK ITEMS:
APPLICATION
3/1/2017
INITIAL REVIEW
3/6/2017
EXPIRATION
8/28/2017
RECHECKS:
1. 03/21/2017
PROJECT APPLICANT CONTACT PERSON:
2.
Jim Andersen
3.
TEL:
(714)713-7793
FAX:
VALUATION:$30,000.00
EMAIL:
constructionjim@gmail.com
FLOOD ZONE:X-0602320278J
The recheck of your drawing was completed this morning, 03/21/2017; and the following items from the first plan check are not done/ completed at this time. See the list below for item # 2, 5, 7, 8, & 9.
APPLICABLE CODE: 2016 CALIFORNIA BUILDING CODE (CBC) WITH
CITY OF SANTA ANA AMENDMENTS
All items noted on this plan check report must be addressed. If you feel that an item is not applicable to your project, note “N/A” and discuss the reason with the plan checker.Please indicate the sheet number and detail to the right of each correction, or note the number on the plans where the correction is made. Resubmit marked original, calculations and this correction sheet. A separate sheet for response may be used.Resubmit 2corrected sets of plans.Meetings between the project applicant/designer and the plan reviewer shall be by appointment only. Please call (714) 647-5862 for an appointment.The drawings/information submitted for Building Safety Division review is incomplete. The applicant for this building permit is for: “INSTALLING (2) NEW ROOF-MOUNTED HVAC UNITS”. Submitted drawings and structural calculation do not reflect this scope of work. The applicant shall, prior to resubmitting, complete all construction documents to show the items under the above scope of the work and show compliance with the 2016 California Building Standards Code with local amendments.Provide a clear roof framing plan and show location and total weight of each HVAC unit on the roof plan with reference to construction details for the proposed work. Clearly indicate the scope of work under this building permit application:
- Revise project job description on the building permit application worksheet to reflect the work to be done
under the subject building permit application.
- Construction drawings must clearly show all work to be done under the subject building permit application.
- Delete all notes and details from drawings that are not a part of the work to be done under the subject building
permit application. This includes mechanical, plumbing and electrical work that is not specifically required by
the Building Code.This review does not include mechanical, plumbing, fire sprinkler system, or electrical work. Separate plans, applications, fees, plan checks, and permits are required for mechanical, plumbing, fire sprinkler systems, and electrical work. Call 647-5800 for information.The applicant shall obtain clearances/approvals for the following prior to building permit issuance:
- Planning Division approval on the corrected/final set of drawings (647-5804.) Previously approved plans
should be submitted to expedite the process.
- Police Department approval on the corrected/final set of drawings (647-5840)
- Public Works Agency approval (647-5039)
- Proof of Worker’s Compensation Insurance shall be required at the time of permit issuance