Loading...
HomeMy WebLinkAbout264150_2_Corrections.docxTENANT IMPROVEMENT PLAN CHECK COMMENTS COMMENTS Planning & Building Agency Building Safety Division 20 Civic Center Plaza P.O. Box 1988 (M-19) Santa Ana, CA 92702 (714) 647-5800 www.santa-ana.org PLAN CHECK NO: 101103448 PROJECT ADDRESS: 1532 E Warner Ave PLAN CHECK ENGINEER: Le, TungTEL:714 647-5896 EMAIL: Tle10@santa-ana.orgFAX:714 647-5897 TYPE OF CONSTRUCTION: III B OCCUPANCY CLASSIFICATION(S): B PLAN CHECK DATES: REMARKS/RECHECK ITEMS: APPLICATION 3/12/2020 INITIAL REVIEW 4/23/2020 EXPIRATION 9/8/2020 RECHECKS: 1. PROJECT APPLICANT CONTACT PERSON: 2. Geoff Tomlinson 3. TEL: (949)419-6422 FAX: VALUATION: $63,660.00 EMAIL: geofft@vahaenergy.com FLOOD ZONE: X-0602320278J APPLICABLE CODE: 2019 CALIFORNIA BUILDING CODE (CBC) WITH CITY OF SANTA ANA AMENDMENTS General: All items noted on this plan check report must be addressed. If you feel that an item is not applicable to your project, note “N/A” and discuss the reason with the plan checker.Please indicate the sheet number and detail to the right of each correction, or note the number on the plans where the correction is made. Resubmit marked original, calculations and this correction sheet. A separate sheet for response may be used.Resubmit (3)corrected sets of plans. All items noted on this plan check report must be addressed. If you feel that an item is not applicable to your project, note “N/A” and discuss the reason with the plan checker.Please return marked up set of drawings with corrections.The applicant shall obtain clearances/approvals for the following prior to building permit issuance: - Planning Division approval on the corrected/final set of drawings (647-5804.) Previously approved plans should be submitted to expedite the process. - Fire Department approval on the corrected/final sets of drawings ((714)573-6100)Architectural & Structural Review CommentsRoof Anchor:Detail 2/S2.0 was not provided as referenced at the Roof Anchor symbol on sheet S1.1. Detail 8/S2.0: Please provide details to show the mechanical anchor (roof anchor) is attached to the structural roof member(s). Structural engineer stamp and signature: Please include the signing date next to the signature. Reminder: Electrical is under a separate review.