HomeMy WebLinkAbout262622_2_Corrections.docxTENANT IMPROVEMENT
PLAN CHECK COMMENTS
COMMENTS
Planning & Building Agency
Building Safety Division
20 Civic Center Plaza
P.O. Box 1988 (M-19)
Santa Ana, CA 92702
(714) 647-5800
www.santa-ana.org
PLAN CHECK NO:
103102940
PROJECT ADDRESS:
2020 W Chestnut Ave
PLAN CHECK ENGINEER:
Lee, WayneTEL:714
EMAIL:
wlee@santa-ana.orgFAX:714
647-5897
TYPE OF CONSTRUCTION:
III B
OCCUPANCY CLASSIFICATION(S):
B
PLAN CHECK DATES:
REMARKS/RECHECK ITEMS:
APPLICATION
1/31/2020
INITIAL REVIEW
3/25/2020
EXPIRATION
7/29/2020
RECHECKS:
1.
PROJECT APPLICANT CONTACT PERSON:
2.
Leo Gonzales
3.
TEL:
(714)915-7846
FAX:
VALUATION: $80,000.00
EMAIL:
gonzalezgonzo3@yahoo.com
FLOOD ZONE: X-0602320257J
APPLICABLE CODE: 2019 CALIFORNIA BUILDING CODE (CBC) WITH
CITY OF SANTA ANA AMENDMENTS
All items noted on this plan check report must be addressed. If you feel that an item is not applicable to your project, note “N/A” and discuss the reason with the plan checker.Please indicate the sheet number and detail to the right of each correction, or note the number on the plans where the correction is made. Resubmit marked original, calculations and this correction sheet. A separate sheet for response may be used.
All items noted on this plan check report must be addressed. If you feel that an item is not applicable to your project, note “N/A” and discuss the reason with the plan checker.Please indicate the sheet number and detail to the right of each correction, or note the number on the plans where the correction is made. Resubmit marked original, calculations and this correction sheet. A separate sheet for response may be used.Resubmit 3corrected sets of plans.Please return marked up set of drawings with corrections.The applicant shall obtain clearances/approvals for the following prior to building permit issuance:
- Planning Division approval on the corrected/final set of drawings (647-5804.) Previously approved plans
should be submitted to expedite the process.
- Police Department approval on the corrected/final set of drawings (647-5840)
- Public Works Agency approval (647-5039)
- County of Orange Health Department approval on the corrected/final set of drawings (667- 3600)Clearly indicate the scope of work under this building permit application:
- Revise project job description on the building permit application worksheet to reflect the work to be done
under the subject building permit application. The application shows 559 sf. However, floor plan shows 15’x43’=645 sf. walk-in cooler and freezer. In addition, the 344 sf. walk-in cooler + 258 sf. freezer =602 sf. does not match 645 sf. Please clarify all inconsistent information on plan and building permit worksheet.
- Provide a narrative scope of work on the cover sheet.All persons preparing plans, specifications, and instruments of service for others shall sign those plans, specifications and other instruments of service for others shall sign those plans, specifications and other instruments of service and all contracts therefore. This requirement applies to both exempt and non-exempt projects. Business and Professions Code Chapter 3, Division 3, Section 5536.1(a).Include address and telephone number of the responsible designer, and date of signing of drawings.This review does not include mechanical, plumbing, fire sprinkler system, or electrical work. Separate plans, applications, fees, plan checks, and permits are required for mechanical, plumbing, fire sprinkler systems, and electrical work. Call 647-5800 for information.Sheet A-1.0. Show all property lines of record on the site plan. Sheet A-1.0. Show north arrow on the site plan.Sheet A-1.0. Show type of construction and occupancy group on the cover sheet.Sheet A-1.0. Specify if the existing building is equipped with fire-sprinkler.Note ICC Research Report Number on the drawings for Walk-in cooler and or freezer.STRCUTURALComplete plans and design calculations bearing the signature of a civil or structural engineer registered in the State of California shall be submitted to the structural plan check for their approval. Cooler and freezer wall panel shall be connected to the supporting structure with fasteners specified complying with the building code and shall be detailed on the approved plans.The seismic anchors and continuous backing used to attach cooler and freezer wall panels to concrete slab as shown on the attached detail shall be designed and detailed on approved plans by California licensed structural or civil engineer.