Loading...
HomeMy WebLinkAbout264822_2_Corrections.docxRESIDENTIAL PLAN CHECK COMMENTS Planning & Building Agency Building Safety Division 20 Civic Center Plaza P.O. Box 1988 (M-19) Santa Ana, CA 92702 (714) 647-5800 www.santa-ana.org PLAN CHECK NO: 101103610 PROJECT ADDRESS: 3710 S Raitt St Unit# A PLAN CHECK ENGINEER: Lee, WayneTEL:714 647-5848 EMAIL: wlee@santa-ana.orgFAX:714 647-5897 TYPE OF CONSTRUCTION: V B OCCUPANCY CLASSIFICATION(S): R-2 PLAN CHECK DATES: REMARKS/RECHECK ITEMS: APPLICATION 6/16/2020 INITIAL REVIEW 7/28/2020 EXPIRATION 12/13/2020 RECHECKS: 1. PROJECT APPLICANT CONTACT PERSON: 2. Steve Haglund 3. TEL: (714)422-9933 FAX: VALUATION: $25,000.00 EMAIL: rshaglund@gmail.com FLOOD ZONE: X-0602320259J Note: Numbers in parenthesis (unless otherwise noted) refer to code sections of the 2019 California Residential Code (CRC); 2019 California Building Code (CBC); CMC = 2019 California Mechanical Code; CPC = 2019 California Plumbing Code; CEC = 2019 California Electrical Code; T = Table; ICC = International Code Council.All items noted on this plan check report must be addressed. If you feel that an item is not applicable to your project, note “N/A” and discuss the reason with the plan checker.Please indicate the sheet number and detail to the right of each correction, or note the number on the plans where the correction is made. Resubmit marked original, calculations and this correction sheet. A separate sheet for response may be used. The applicant shall obtain clearances/approvals for the following, prior to building permit issuance: -Planning Division approval on the corrected/final set of drawings (647-5804). Previously approved plans should be submitted to expedite the process. PLAN CHECK COMMENTS: Please clarify the scope of work. The stairway by unit #10A at 3710 S Raitt St is shown previous repaired. Clarify which stairway to be repaired at 3710 S Raitt St.. Please revise paper permit application. Revise drawings to clarify the stairway to be repaired in the scope of work and the location on the drawings. Sheet A0.00. Update governing codes to 2019 versions instead of 2016.