Loading...
HomeMy WebLinkAbout262863_2_Corrections.docxTENANT IMPROVEMENT PLAN CHECK COMMENTS COMMENTS Planning & Building Agency Building Safety Division 20 Civic Center Plaza P.O. Box 1988 (M-19) Santa Ana, CA 92702 (714) 647-5800 www.santa-ana.org PLAN CHECK NO: 101103017 PROJECT ADDRESS: 2901 W Pendleton Ave PLAN CHECK ENGINEER: Lee, WayneTEL:714 EMAIL: wlee@santa-ana.orgFAX:714 647-5897 TYPE OF CONSTRUCTION: V B OCCUPANCY CLASSIFICATION(S): B PLAN CHECK DATES: REMARKS/RECHECK ITEMS: APPLICATION 1/31/2020 INITIAL REVIEW 3/18/2020 EXPIRATION 7/29/2020 RECHECKS: 1. PROJECT APPLICANT CONTACT PERSON: 2. Jonathan Villaguez 3. TEL: (323)678-6394 FAX: VALUATION: $3,000.00 EMAIL: FLOOD ZONE: X-0602320258J APPLICABLE CODE: 2019 CALIFORNIA BUILDING CODE (CBC) WITH CITY OF SANTA ANA AMENDMENTS All items noted on this plan check report must be addressed. If you feel that an item is not applicable to your project, note “N/A” and discuss the reason with the plan checker.Please indicate the sheet number and detail to the right of each correction, or note the number on the plans where the correction is made. Resubmit marked original, calculations and this correction sheet. A separate sheet for response may be used.Resubmit 3corrected sets of plans. All items noted on this plan check report must be addressed. If you feel that an item is not applicable to your project, note “N/A” and discuss the reason with the plan checker.Please indicate the sheet number and detail to the right of each correction, or note the number on the plans where the correction is made. Resubmit marked original, calculations and this correction sheet. A separate sheet for response may be used.Resubmit 3corrected sets of plans.Please return marked up set of drawings with corrections.Provide signatures by the architectural designer OR stamp, signature and date when plans are signed by the license design professional on sheet T-1 and sheet A-1. All persons preparing plans, specifications, and instruments of service for others shall sign those plans, specifications and other instruments of service for others shall sign those plans, specifications and other instruments of service and all contracts therefore. This requirement applies to both exempt and non-exempt projects. Business and Professions Code Chapter 3, Division 3, Section 5536.1(a).Sheet T-1. Provide narrative and detail of the extent of the scope of work in addition to tenant improvement on the cover sheet.Sheet T-1. Please update the applicable code to 2019 version of the Codes under building code notes.Provide structural calculations and drawings, stamped and signed by a California licensed architect or registered civil engineer for: - New or relocate mechanical equipment on roof (note on Roof Framing Plan weight of each existing and new piece of equipment on the roof. E.g. swamp cooler).Sheet SR-1. On roof framing plan, provide information on the bubble #1 and #2 and the area hatched.