HomeMy WebLinkAbout281464_1_Corrections.docxTENANT IMPROVEMENT
PLAN CHECK COMMENTS
COMMENTS
Planning & Building Agency
Building Safety Division
20 Civic Center Plaza
P.O. Box 1988 (M-19)
Santa Ana, CA 92702
(714) 647-5800
www.santa-ana.org
PLAN CHECK NO:
101108586
PROJECT ADDRESS:
610 N Santiago St Bldg# 1
PLAN CHECK ENGINEER:
Ahangian, KathyTEL:714
647-5812
EMAIL:
Kahangian@santa-ana.orgFAX:714
647-5897
TYPE OF CONSTRUCTION:
V B, SPK
OCCUPANCY CLASSIFICATION(S):
B, S-1
PLAN CHECK DATES:
REMARKS/RECHECK ITEMS:
APPLICATION
11/17/2021
INITIAL REVIEW
12/14/2021
EXPIRATION
5/16/2022
RECHECKS:
1.
PROJECT APPLICANT CONTACT PERSON:
2.
Clinton Johnson
3.
TEL:
(920)390-0468
FAX:
VALUATION: $200,000.00
EMAIL:
clinton@johnsonsolar.com
FLOOD ZONE: X-0602320163J
APPLICABLE CODE: 2019 CALIFORNIA BUILDING CODE (CBC) WITH
CITY OF SANTA ANA AMENDMENTS
All items noted on this plan check report must be addressed. If you feel that an item is not applicable to your project, note “N/A” and discuss the reason with the plan checker.Please indicate the sheet number and detail to the right of each correction, or note the number on the plans where the correction is made. Resubmit marked original, calculations and this correction sheet. A separate sheet for response may be used.Resubmit 2corrected sets of plans.Meetings between the project applicant/designer and the plan reviewer shall be by appointment only. Please call (714) 647-5812 for an appointment.The applicant shall obtain clearances/approvals for the following prior to building permit issuance:
- Fire Department approval on the corrected/final sets of drawings ((714)573-6100)
- Proof of Worker’s Compensation Insurance shall be required at the time of permit issuanceSubmit a signed copy of the contract showing labor and materials for all work to be done under the subject building permit application. The plan check engineer may accept the contract price as the valuation of improvements for unique/unusual projects in lieu of using a cost per square foot basis.Drawings must be to scale and be on 18” x 24” minimum sheets.
- Provide a Vicinity Map showing project location
- Scale of Drawings must be large enough to ensure legibilityProvide complete roof framing plan( dimensioned) to show roof rafter size, spacing and span.Justify existing roof rafters can take additional load from uplift. (showlocation of each attachment with dimension on roof plan.)Analyze roof rafters’ connection to the wall due to extra uplift load.Provide required fire path with dimensions to sky light, or ventilation hatches around roof access, parapet or roof edge. On calculation please calculate tributary area for each anchor, 29.1sf is area of one panel and each connection is supporting more than one panel.( please revisit calculation)