HomeMy WebLinkAbout295251_1_Corrections.docxRESIDENTIAL PLAN CHECK
COMMENTS
Planning & Building Agency
Building Safety Division
20 Civic Center Plaza
P.O. Box 1988 (M-19)
Santa Ana, CA 92702
(714) 647-5800
www.santa-ana.org
PLAN CHECK NO:
101112809
PROJECT ADDRESS:
1136 E Washington Ave
PLAN CHECK ENGINEER:
Lee, WayneTEL:714
647-5848
EMAIL:
wlee@santa-ana.orgFAX:714
647-5897
TYPE OF CONSTRUCTION:
N/A
OCCUPANCY CLASSIFICATION(S):
A-3
PLAN CHECK DATES:
REMARKS/RECHECK ITEMS:
APPLICATION
11/18/2022
INITIAL REVIEW
12/12/2022
EXPIRATION
5/17/2023
RECHECKS:
1.
PROJECT APPLICANT CONTACT PERSON:
2.
Miranda Brooks
3.
TEL:
(949)493-9548
FAX:
VALUATION: $70,000.00
EMAIL:
miranda@aquatictechnologies.com
FLOOD ZONE: X-0602320163J
Note: Numbers in parenthesis (unless otherwise noted) refer to code sections of the 2019 California Residential Code (CRC); 2019 California Building Code (CBC); CMC = 2019 California Mechanical Code; CPC = 2019 California Plumbing Code; CEC = 2019 California Electrical Code; T = Table; ICC = International Code Council.All items noted on this plan check report must be addressed.Please indicate the sheet number and detail to the right of each correction, or note the number on the plans where the correction is made.
All drawings and supporting documents shall be prepared, stamped, and signed by a California licensed architect or registered professional engineer. (CRC R301.1.3, CBC 107.1 and 107.3.4.1).
This review does not include mechanical, plumbing or electrical work. Separate plans, applications, fees, plan checks, and permits are required for mechanical, plumbing, and electrical work. Call 647-5800 for information.
The applicant shall obtain clearances/approvals for the following, prior to building permit issuance:
-Planning Division approval on the corrected/final set of drawings (647-5804). Previously
approved plans should be submitted to expedite the process.
-Public Works Agency approval (647-5039).
-Orange County Health Department (714) 433-6074.
This permit application does not include the pool fence and gate. Please list them as under separate permit items below the scope of work on the first sheet of the drawings.
Provide an engineering pool plan and cross-reference the applicable details on sheet 100-C and detail #214 into the plan for pool construction. Plans shall be stamped, signed and dated by the licensed engineer.
Submit the engineering sheets as the same size of paper as the rest of the drawings. Update sheet 100-C and detail #214.
Revise sheet index to include all pool engineering sheets. E.g. #100-C, detail #214…
Label landscape plans as “reference only”.
END OF COMMENTS.