Loading...
HomeMy WebLinkAbout306408_1_Corrections.docxPLAN CHECK COMMENTS COMMENTS Planning & Building Agency Building Safety Division 20 Civic Center Plaza P.O. Box 1988 (M-19) Santa Ana, CA 92702 (714) 647-5800 www.santa-ana.org PLAN CHECK NO: 101116386 PROJECT ADDRESS: 301 N Tustin Ave Unit# E PLAN CHECK ENGINEER: Le, TungTEL:714 647-5896 EMAIL: Tle10@santa-ana.orgFAX:714 647-5897 TYPE OF CONSTRUCTION: V B OCCUPANCY CLASSIFICATION(S): U PLAN CHECK DATES: REMARKS/RECHECK ITEMS: APPLICATION 8/30/2023 INITIAL REVIEW 9/6/2023 EXPIRATION 2/26/2024 RECHECKS: 1. PROJECT APPLICANT CONTACT PERSON: 2. Maria Whack 3. TEL: (843)708-1254 FAX: VALUATION: $60,000.00 EMAIL: maria.whack@southeastpermits.com FLOOD ZONE: X-0602320277J APPLICABLE CODE: 2022 CALIFORNIA BUILDING CODE (CBC) WITH CITY OF SANTA ANA AMENDMENTS All items noted on this plan check report must be addressed. If you feel that an item is not applicable to your project, note “N/A” and discuss the reason with the plan checker.Please indicate the sheet number and detail to the right of each correction, or note the number on the plans where the correction is made. Resubmit marked original, calculations and this correction sheet. A separate sheet for response may be used.Resubmit 2corrected sets of plans.The applicant shall obtain clearances/approvals for the following prior to building permit issuance: - Planning Division approval on the corrected/final set of drawings (647-5804.) Previously approved plans should be submitted to expedite the process. - Public Works Agency approval (647-5039)Plans shall be legible. Please reprint plans on a larger size paper. Pylon sign A: Please remove the 30-ft height pylon sign if it’s not part of this permit application. Otherwise, provide complete structural design and structural details. Structural details provided in the structural calculation package: Please provide structural details/plans with the architectural signs package. Plan sheets should be printed on the same paper size. Reminder: Plans shall be stamped, signed and dated by the engineer of record. (End of Comment)