HomeMy WebLinkAbout309637_2_Corrections.docxTENANT IMPROVEMENT
PLAN CHECK COMMENTS
COMMENTS
Planning & Building Agency
Building Safety Division
20 Civic Center Plaza
P.O. Box 1988 (M-19)
Santa Ana, CA 92702
(714) 647-5800
www.santa-ana.org
PLAN CHECK NO:
101117394
PROJECT ADDRESS:
1720 E Edinger Ave
PLAN CHECK ENGINEER:
Ahangian, KathyTEL:714
647-5812
EMAIL:
Kahangian@santa-ana.orgFAX:714
647-5897
TYPE OF CONSTRUCTION:
V B
OCCUPANCY CLASSIFICATION(S):
A-2, B
PLAN CHECK DATES:
REMARKS/RECHECK ITEMS:
APPLICATION
11/9/2023
INITIAL REVIEW
11/25/2023
EXPIRATION
5/7/2024
RECHECKS:
1.3/5/24
PROJECT APPLICANT CONTACT PERSON:
2.
Patrick Faranal
3.
TEL:
(909)287-7375
FAX:
VALUATION: $19,000.00
EMAIL:
pfaranal@nsmc.com
FLOOD ZONE: X-0602320277J
APPLICABLE CODE: 2022 CALIFORNIA BUILDING CODE (CBC) WITH
CITY OF SANTA ANA AMENDMENTS
All items noted on this plan check report must be addressed. If you feel that an item is not applicable to your project, note “N/A” and discuss the reason with the plan checker.Please indicate the sheet number and detail to the right of each correction, or note the number on the plans where the correction is made. Resubmit marked original, calculations and this correction sheet. A separate sheet for response may be used.Resubmit 2corrected sets of plans.Meetings between the project applicant/designer and the plan reviewer shall be by appointment only. Please call (714) 647-5812 for an appointment.Please return marked up set of drawings with corrections.CBC Sections A106.1 and A106.3.4.1, All drawings and supporting documents shall be prepared, stamped and signed by a California licensed architect or registered civil engineer.Pending 3/5/24This review does not include mechanical, plumbing, fire sprinkler system, or electrical work. Separate plans, applications, fees, plan checks, and permits are required for mechanical, plumbing, fire sprinkler systems, and electrical work. Call 647-5800 for information.The applicant shall obtain clearances/approvals for the following prior to building permit issuance:
- Planning Division approval on the corrected/final set of drawings (647-5804.) Previously approved plans
should be submitted to expedite the process.Please verify if the canopy on page 7 is part of this permit application. If it is provide complete structural calculation and construction detail or remove from this drawings.Ok 3/5/24Provide blocking for attachment of aluminum clip to the wall.Ok 3/5/24Provide connection detail for horizontal and vertical member of the main frame.Pending 3/5/24 Provide specification (thickness and length) of the welding on page 6.Pending 3/5/24Provide welding symbols.Please identify thickness of the slat and show how long the span is. if there is no intermediate support , provide calculation to show it can span 16’.Pending 3/5/24, Not FoundOn page 5 please identify all the details, if there are additional aluminum tube , provide spacing and show on sheet 6.Pending 3/5/24 Not found