HomeMy WebLinkAbout329199_1_Corrections.docxRESIDENTIAL PLAN CHECK
COMMENTS
Planning & Building Agency
Building Safety Division
20 Civic Center Plaza
P.O. Box 1988 (M-19)
Santa Ana, CA 92702
(714) 647-5800
www.santa-ana.org
PLAN CHECK NO:
101123694
PROJECT ADDRESS:
1938 E Warner Ave Bldg# P
PLAN CHECK ENGINEER:
Lo, JonathanTEL:714
647-5822
EMAIL:
Jlo@santa-ana.orgFAX:714
647-5897
TYPE OF CONSTRUCTION:
I B, SPK
OCCUPANCY CLASSIFICATION(S):
A-3, S-2
PLAN CHECK DATES:
REMARKS/RECHECK ITEMS:
APPLICATION
5/13/2025
INITIAL REVIEW
6/9/2025
EXPIRATION
11/9/2025
RECHECKS:
1.
PROJECT APPLICANT CONTACT PERSON:
2.
Aram Darzibashian
3.
TEL:
(310)635-0170
FAX:
VALUATION:
EMAIL:
alan@benashiron.com
FLOOD ZONE: X-06059C0279J
Note: Numbers in parenthesis (unless otherwise noted) refer to code sections of the 2022 California Residential Code (CRC); 2022 California Building Code (CBC); CMC = 2022 California Mechanical Code; CPC = 2022 California Plumbing Code; CEC = 2022 California Electrical Code; T = Table; ICC = International Code Council.All items noted on this plan check report must be addressed. If you feel that an item is not applicable to your project, note “N/A” and discuss the reason with the plan checker.Please indicate the sheet number and detail to the right of each correction, or note the number on the plans where the correction is made. Resubmit marked original, calculations and this correction sheet. A separate sheet for response may be used.Resubmit corrected sets of plans.Meetings between the project applicant/designer and the plan reviewer shall be by appointment only. Please call (714) 647-5822 for an appointment.Comments have been provided on drawing and calculation hard copies in relation to all comments below. Applicant must pick up red marked sets from city prior to resubmittal and return marked up set with resubmittal.DocumentationCalculations shall be reviewed and stamped by EOR. All city comments provided for calculations shall be reviewed and approved by EOR as well as deferred steel engineer.CalculationsResubmitted calculation package shall be fully bound prior to approval. Clipped pages not allowed.Justify no live load in member designs. Cantilever Column – Justify pinned fixity at top join.(End of Comment)