Laserfiche WebLink
3. Safety Procedures <br />Cityof Santa Ana <br />Pavement Management Program 2018 <br />Quality Control Plan <br />NCE administers a health and safety program in compliance with the Nevada Occupational <br />Safety and Health Act (Section 618.383) and Cal OSHA Title VIII, Section 3203. The <br />program is documented in NCE's Workplace Safety Program Manual. <br />Generally, the safety procedures include: <br />• Inspectors to wear a Class 2 safety vest at all times; <br />• Flashing beacon on all vehicles utilized for inspections; and <br />• Stopped vehicles to be parked at locations away from moving traffic (e.g. nearby <br />parking, shoulders etc.). <br />On streets where there is a high volume of traffic or high speeds, additional measures may <br />be necessary, such as: <br />• Inspections to occur during off-peak periods or on weekends; <br />• Additional inspector to watch out for traffic; and <br />• Traffic flaggers in extreme cases. <br />In extreme cases where it is not possible to walk on the pavement surface, inspections will <br />be performed from sidewalks or raised medians. However, this is extremely rare for city or <br />county roads/streets; this is most often encountered on state highways, and lane closures <br />are the most likely option at this point. <br />All NCE inspectors are required to annually update their online safety programs as <br />administered by "Click Safety". Class Taken are: <br />• C2 Cal PPE <br />• C2 Workzone Traffic Control <br />• C2 Workzone Traffic Safety Tips <br />• G2 Cal/OSHA Heat Illness <br />5 <br />Engineering & Environmental Services <br />55B-134 <br />