KMEA - Laserfiche WebLink

Home Browse Search

ji KMEA_ • A written statement of that indicates the person who conducted the survey is either a State Certified Asbestos Consultant (CAC) and/or a State Certified Site Surveillance Technician (SST) working under the direction of a CAC. • The dates the survey was conducted. • A listing of all suspected materials containing any asbestos, a listing of all samples collected, and a sketch of where the samples were taken. • The name, address, and telephone number of any laboratory used to conduct analyses of materials for asbestos content. • A statement of the Laboratory qualifications that will indicate that they used the analytical Method specified in Appendix A, Subpart F, 40 CFR Part 763, Section 1, Polarized Light Microscopy and that such laboratory is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP). • In addition to describing the laboratory analytical method(s) used, sampling protocols, test data, and any other information used to identify or quantify any materials containing asbestos will be provided. • A general description of the condition of the facility, including but not limited to a description of any obvious fire or structural damage. • A summary of the survey findings and related regulatory requirements. • Conclusions and recommendations based on the report findings. Lead -Based Paint Surveys KMEA's lead survey will be conducted in accordance with the California Code of Regulations, Title 17, Section 35001 et seq and 8 CCR 15321 and will focus on identifying lead containing coatings, paints and ceramic tiles that would require removal prior to demolition to comply with Cal -EPA Department of Toxic Substances Control (DTSC) hazardous waste disposal regulations. Survey will also address Cal/OSHA requirements involving disturbance and handling of identified lead containing materials. Survey methods will include collecting paint chip samples and submitting such samples for laboratory analysis. The survey and report will include the following information: • Executive summary. • The name, address, and telephone number of the person who conducted the survey. • A written statement of that indicates the person who conducted the survey is a California Lead -Related Construction Certified Inspector/Risk Assessor. • The dates the survey was conducted. • A listing of all suspected materials containing any lead, a listing of all samples collected, and a sketch of where the samples were taken. • The name, address, and telephone number of any laboratory used to conduct analyses of materials for lead content. • A statement of the laboratory qualifications that will indicate that they used Flame Atomic Absorption (FLAA) or Total Threshold Limit Concentration (TTLC) in accordance with EPA method SW 846. Laboratory will successfully participate in the AIHA ELLAP Industrial Hygiene Laboratory Program. • In addition to describing the laboratory analytical method(s) used, sampling protocols, test data, and any other information used to identify or quantify any materials containing lead will be provided. • A summary of the survey findings and related regulatory requirements. • Conclusions and recommendations based on the report findings. General Assumptions KMEA makes the following general assumptions associated with preparing the Phase I ESAs, Phase II ESAs and conducting Hazardous Materials Surveys. These assumptions apply to the scope of services and schedule outlined in Section 2 of our proposal in response to the sample site locations identified in the City RFP No. 18-043. Additional project- and scope -specific assumptions are also presented in Section 2. • KMEA will have unencumbered access to the site. • To the extent feasible, the City will collaborate with KMEA in identifying knowledgeable site contact(s) to be interviewed and to schedule and coordinate the Phase I ESA site visit and provide access to survey areas and sampling locations during Phase II ESAs and Hazardous Materials Surveys. City of Santa Ana Page 10 June 5, 2018 Various Environmental Services RFP NO.: 18-043