25B - AGMT CAMERA SYSTEM - Laserfiche WebLink

Home Browse Search

SIEMENS boxes with dirt and a 1" slurry cover after the final inspections. • Trench a minimum of 2 ft. deep between the light pole and the Code Blue Tower base. Place in the trench PVC conduit and wire for 120vac 20 amp power for the Code Blue Tower receptacle. Verify circuit is in proper working order. Install new 20 amp circuit if required. Keep power for scoreboard. • Install concrete base 24" base x 36" deep, insure concert base is sloped to for water to run off from CodeBlue Tower. • Install CodeBlue tower on concrete base • Install I10VAC quad outlet to base of CodeBlue Tower. • Siemens shall mount all cameras (one (1) PTZ and one (1) 360 deg camera) on CodeBlue Tower. Water Company Pump Station Building • Install on the roof edge one custom pole mount • Pole mount one (1) outdoor PTZ camera. • Pole mount one (1) outdoor loud speaker. • Pole mount one (1) Ubiquity radio link pointed at the high pole west of the scoreboard radio link. • Install one (1) NEMA enclosure inside the building. • Install equipment power supplies and one (1) PoE Switch in the enclosure. • Install a 120vac quad outlet in the enclosure connected to the closest 120vac power source inside the building. • Install Cat6 OSP cabling for all outdoor equipment Additional Installation Requirements: 1. All required fire stopping shall be UL listed 3M Fire barrier Caulk or 4hr, UL rated equivalent is required. Retain one (1) used cartridge for documentation. 2. Each pole and field enclosure location shall be interconnected via conduit 3. All outdoor equipment shall be weather proofed to protect devices, cabling and structures from the outdoor elements. 4. All risers and lateral connections into the field enclosures, both Security and IT/Telecom enclosures shall be schedule 80 rigid steel construction. S. Conduit elbows may be schedule 80 PVC construction, assuming the connection to steel risers occurs within the concrete foundation. Any conduit elbows that are not embedded within a concrete foundation shall be schedule 80 and rigid steel construction. 6. All above ground conduit shall be galvanized rigid steel unless otherwise noted. 7. Conduit runs shall allow for 50% additional capacity. All conduits shall have a "pull string" installed and remain for future use. 8. All work shall meet or exceed the latest requirements of all national, state, county and municipal codes. 9. All required permits and inspection certificates shall be provided by others. 10. All work shall conform to the National Electrical Code, National Fire Codes, NFPA Life Safety Code and other local codes. Page 13 25B-16