25B - AGMT CAMERA SYSTEM - Laserfiche WebLink

Home Browse Search

SIEMENS • Install two (2) network fixed cameras on the roofs edge viewing each corners of the park towards the bleachers. • Install two (2) network fixed cameras on the roof edge viewing the street parking and building facing towards the street • Install rigid conduit where it is exposed on the exterior of the building. All indoor conduits may be EMT. • Install one (1) outdoor loud speaker on the side of the building facing towards the street • Install on a custom roof pole mount two (2) Ubiquiti radio links, one (1) pointing to the high light pole next to bleachers, one (1) pointing to the community center swimming pool building. • Install Cat6 cable to the cameras and the loud speaker from the IDF enclosure. • Install inside the building electrical panel room on a fire rated backboard, a vertical low profile IDF enclosure, server, PoE switch and other miscellaneous items inside the enclosure. Provide inside the IDF enclosure a 120vac quad outlet on a dedicated 20amp circuit Additional Installation Requirements: 1. All required fire stopping shall be UL listed 3M Fire barrier Caulk or 4hr, UL rated equivalent is required. Retain one (1) used cartridge for documentation. 2. Each pole and field enclosure location shall be interconnected via conduit 3. All outdoor equipment shall be weather proofed to protect devices, cabling and structures from the outdoor elements. 4.. All risers and lateral connections into the Field enclosures, both Security and IT/Telecom enclosures shall be schedule 80 rigid steel construction. S. Conduit elbows may be schedule 80 PVC construction, assuming the connection to steel risers occurs within the concrete foundation. Any conduit elbows that are not embedded within a concrete foundation shall be schedule 80 and rigid steel construction. 6. All above ground conduit shall be galvanized rigid steel unless otherwise noted. 7. Conduit runs shall allow for 50% additional capacity. All conduits shall have a "pull string" installed and remain for future use. B. All work shall meet or exceed the latest requirements of all national, state, county and municipal codes. 9. All required permits and inspection certificates shall be provided by others. 10. All work shall conform to the National Electrical Code, National Fire Codes, NFPA Life Safety Code and other local codes. General Terms & Conditions: 11. Prior to any daily work being conducted, a safety tailboard meeting shall be conducted with all contractors and site personnel. This training will be re -conducted every time there are new personnel working on site. 12. All affiliates of the contractor shall dress in appropriate work attire bearing their respective company logo for recognition. When working at the Police Department all affiliates of the contractor shall report to CDC, for sign in and temporary badging for the day. They must Page 12 25B-22