80A - JOINT WORK CENTER MOU - Laserfiche WebLink

Home Browse Search

EXHIBIT 3 EXHIBIT B — OUTLINE SPECIFICATIONS DIVISION 2 1. Interior walls and plaster or gypsum board ceilings shall be finished In latex eggshell paint. 2. Heavy textured walls shall be sanded smooth and prepared for a new paint finish. 3. Existing wall coverings shall be removed (unless otherwise noted), wall surface shall be prepared, and receive a new paint finish. 4. Doors and frames shall be refinished to provide a new -looking appearance. 5. HVAC registers and grilles shall be in a newly painted condition. In the event the registers are in poor condition; registers shall be replaced by the Lessor. 6. Stained or natural finished wood shall be refinished with sealer and lacquer. 7. Metal toilet stall partitions shall be repainted using electrostatic paint process. F. Where alteration work occurs, new painted surfaces shall extend to the natural break. G. Where wall covering is specified, the product shall be "breathable" to prevent mold and bacteria development. All adhesives (Including but not limited to adhesives for carpet, carpet tile, plastic laminate, wall coverings, adhesives for wood, or sealants) shall meet the VCC content limit specified in CalGreen Sections 4.504.2,1-4.504.2.4 and 5.504.4.1- 5.504.4.3. H. Interior sealants shall not contain mercury, butyl rubber, neoprene, styrene butadiene rubber (SBR), nitride, aromatic solvents (organic solvent with a benzene ring in its molecular structure), fibrous talc or asbestos, formaldehyde, halogenated solvents, lead, cadmium, hexavalent chromium, or their components. 2.10 BUILDING SPECIALTIES A. Toilet room partitions and accessories: In addition to any code -required toilet room accessories, Lessor shall furnish, install, maintain, and replenish where appropriate, the following accessories: 1. Coln -operated sanitary. napkin dispenser (one per women's toilet room) 2. Folding utility shelf and coat hook (one per toilet stall) 3. Mirror with metal frame assembly (one per lavatory, two or more lavatories may have one continuous mirror) 4. Paper towel dispensers (one per every two lavatories) 5. Sanitary napkin waste receptacle (one per women's toilet stall) 6. Soap dispensers (one per lavatory) 7. Toilet paper dispenser, continuous toilet -paper flow, capable of holding two rolls (one per toilet stall) B. Toilet seat -cover dispenser (one per toilet stall) 9. Trash receptacles (one per toilet room) All accessories shall be constructed of stainless steel and exposed surfaces shall have satin finish. 1. Toilet room partitions: 2. New toilet stall partitions shall match building standard. 3. Lessor shall furnish and install privacy screens at all urinal locations — screens shall match toilet partitions. B. Paper towel and soap dispensers: 20 Rev. March 2019 80A-630