25D - AGMT TRAFFIC SIGNAL MAINTENANCE

Home Browse Search

controller. The Contractor shall adjust the sensitivity levels to tune out any stuck detectors or replace defective vehicle detector amplifiers as necessary. The Contractor shall meter loops individually when troubleshooting loop problems. The City shall be notified of all defective loops. Video Detection — The system needs to be inspected to ensure normal operation, All detection zones needs to be checked for proper detection and the systems needs to be verified that it is capable of applying calls to the controller. The city utilizes Iteris and Econolite video detection systems. o Battery Backup System (If applicable): Some intersections are equipped with battery backup system. For these locations, the Contractor shall test and verify that the system is charged and in working order. o Ancillary Equipment: The Contractor shall check all ancillary equipment (load switches, power supply, flashers, Emergency Vehicle Pre- emption, etc.) in the cabinet for proper operation. • Field Equipment: o The Contractor shall check all pedestrian push buttons for proper operation. o The Contractor shall check all vehicle and pedestrian signal heads for proper operation. o The Contractor shall check all poles and standards for damages. o Contractor shall clean Video Detection camera lens once a year o Contractor shall check and notify the City of any missing or damaged Reflectorized Street Name Signs (RSNS) or traffic signs mounted on the traffic signal poles. o Maintenance of safety lights at traffic signal are done as part of Street Lighting System Maintenance only. • Maintenance Record: The Contractor shall maintain a record log in each controller cabinet showing the date and time of any service. It shall consist of: o Routine Maintenance o Extraordinary Maintenance All records shall be legibly written or printed. These record logs shall become property of the City. City of Santa Ana RFP 19-023 Page A1-3 25D-15