25F - AGMT - JEROME PARK LIGHTING

Home Browse Search

The Energy Network m) As needed, Contractor is responsible for finalizing and revising fixture model numbers. For example, if the specified LED driver is not compatible with the on -site electrical service, the contractor is responsible for updating the model number and specifying the proper driver. Any fixture model updates need to be approved by City, prior to equipment order. n) Contractor will be compensated for work performed and fixtures installed. Any increase on the Base Price due to larger inventory will require written approval by the Agency and will follow procedures set forth for change orders. Any decrease on Base Price due to smaller inventory will result in a lower Base Price to the Contractor. o) The Contractor shall conduct all work during the time window established after the contract is awarded. p) The Contractor shall comply with safety requirements and practices as outlined in accordance with Agency requirements and California Occupational Health and Safety Administration (Cal/OSHA). q) The Contractor shall do all that is necessary to maintain a safe working environment for Contractor's employees, Agency and facility employees and the general public present. r) The Contractor shall work with the Agency facility staff to understand and abide by any site -specific security procedures. s) The Contractor shall clean up any construction dust, dirt and debris from work surfaces or equipment after work is completed each day and prior to occupancy. t) The Contractor shall be very careful to leave the facility with no damage to its structure, contents, existing finishes, and with no evidence of cutting or patching, and with all fixtures and lenses cleaned. u) The Contractor is responsible for securing all necessary permits, including Title 24 energy code documentation and compliance permit, and shall abide by local laws and regulations. v) Prior to ordering of equipment and fixtures, Contractor is to verify fixture quantities, types and installation needs, including specifying equipment that complies with existing electrical service. Final project invoice price will be based upon the quantity of each fixture type installed multiplied by the unit price for that fixture. w) Prior to ordering of lighting fixtures, Contractor is to verify proposed are listed in the Design Lights Consortium (DLC). Contractor is to propose a valid replacement for fixtures that are not DLC certified. x) The chosen contractor will be required to register with Southern California Edison as a Trade Professional (Trade Pro). Directions to register can be found at: https://sceonlineapp.com/CAASupport/Default.aspx. Please note that contractor will NOT be required to produce a Project Feasibility Study or Energy Efficiency Project Influence Job Aid. a R Y !1 �.t v' et or$ .ow on es m 4 A0011 O 3Me must 2W18