Laserfiche WebLink
(a) Section 2801.2 Permit is hereby revised as follows: <br />2801.2 Permit. Permits shall be required as set forth in Section 105.6. and <br />105.6.29. <br />(b) Section 2808.2 Storage site is hereby revised as follows: <br />2808.2 Storage site. Storage sites shall be level and on solid ground, elevated <br />soil lifts or other all-weather surface. Sites shall be thoroughly cleaned and <br />approval obtained from the fire code official before transferring products to the <br />site. <br />(c) Section 2808.3 Size of piles is hereby revised as follows: <br />2808.3 Size of piles. Piles shall not exceed 15 feet in height, 50 feet in width and <br />100 feet in length. <br />Exception: The fire code official is authorized to allow the pile size to be <br />increased where a fire protection plan is provided for approval that includes, but is not <br />limited to, the following: <br />1. Storage yard areas and materials -handling equipment selection, design <br />and arrangement shall be based upon sound fire prevention and protection <br />principles. <br />2. Factors that lead to spontaneous heating shall be identified in the -plan, <br />and control of the various factors shall be identified and implemented, including <br />provisions for monitoring the internal condition of the pile. <br />3. The plan shall include means for early fire detection and reporting to the <br />public fire department; and facilities needed by the fire department for fire <br />extinguishment including a water supply and fire hydrants. <br />4. Fire apparatus access roads around the piles and access roads to the top <br />of the piles shall be established, identified and maintained. <br />5. Regular yard inspections by trained personnel shall be included as part of <br />an effective fire prevention maintenance program. <br />Additional fire protection called for in the plan shall be provided and shall be <br />installed in accordance with this code. The increase of the pile size shall be based <br />upon the capabilities of the installed fire protection system and features. <br />(d) Section 2808.4 Pile Separation is hereby added as follows: <br />Ordinance No. NS-2981 <br />Page 22 of 33 <br />