PSOMAS (2)-A-2020-075-03 - Laserfiche WebLink

Home Browse Search

4, Complete the design of projects including plans, specifications, and engineer's construction cost estimate. The Consultant shall contact manufacturers and/or contractors to verify the engineer's estimate prior to submitting to the City. Specifications shall be prepared in Microsoft Word and an electronic copy of the final version shall be furnished to the City, The City will provide the specification boiler plate to the Consultant, 5. If requested, all preliminary and bid sets of plans shall be plotted on bond or velum paper using Microstation V8i CADD software program. All drawings shall be completed per the City of Santa Ana CADD Standards and any special provisions thereof. For interim submittals, the City may opt to receive only PDF versions of the plans for reviewing purposes. If so, the Consultant team will provided plans and/or specifications accordingly. 6. All original plan sheets, the title sheet of the specifications, calculations, and reports shall be signed and stamped by the Consultant's licensed professional engineer responsible/in-charge of the project. 7. If a part of the on -call project scope, the Consultant shall provide support services during the bidding and construction phases of the project, including, but not limited to: a. Respond to bidder inquiries during the bidding process, including preparation of any addenda. Following award of the construction contract, the Consultant shall attend the pre - construction meeting. b. Review and approve all submittals and shop plan drawings required supporting the construction contract The Consultant shall complete shop drawings reviews within two (2) weeks of receipt. Contract Change Order reviews shall be completed within two (2) working days of receipt. c. Respond to written Requests for Information (RFI) to provide clarification or resolve discrepancies in the contract documents. Responses shall be completed within three (3) working days. d. Provide periodic field reviews and bring to the attention of the City of Santa Ana any defects or deficiencies in the work by the construction contractor which the Consultant may observe. The Consultant shall have no authority to issue instruction on behalf of the City of Santa Ana, or to deputize another to do so. 8. If included in the on -call project scope, upon completion of construction, the Consultant shall prepare as -built plans and submit them to the City. The Consultant shall incorporate all changes to the plans electronically with all necessary revision notations. Once plans have been updated, a signed set of as -built plans shall be submitted to the City with an electronic copy (in Microstation V8i CADD and pdfformats) of the final as -built drawings via CD or e-mail. 9. The Consultant shall monitor the project progress, maintain project files, and control the quality of the work performed by in-house staff and/or sub -consultants. Incomplete (not meeting targeted completion) or poor quality work will not be accepted. The Consultant shall revise the documents within a revised schedule set by the City, which may require overtime. No additional compensation necessary for the consultant to complete this work to the satisfaction of the City shall be approved by the City for the required revisions. It is the responsibility of the Consultant to produce a professional -level quality of work product. 10, If included in the on -call project scope, attend meetings with the City staff as required. 11. If included in the on -call project scope, the Consultant shall coordinate plan check, design topics, permits and any other issues with the City, other Agencies, and all utility companies as required. At the direction of the City, the Consultant shall be the liaison with affected agencies. �r i i r��e en imn� o ore City of Santa Ana RFP 19-100 Page Al-4