Laserfiche WebLink
GPCB . ON : <br />A PCB GROUP COMPANY <br />Certificate of Calibration and Conformance <br />Certificate Number 2017-205567 <br />Instrument Model 820, Serial Number 1584, was calibrated on 28 Aug 2017. The instrument meets <br />factory specifications per Procedure D0001.8160, ANSI S1.4 1983, IEC 651-Type 1 1979, and <br />IEC 804-Type 1 1985. <br />Instrument found to be in calibration as received: YES <br />Date Calibrated: 28 Aug 2017 <br />Calibration due: 28 Aug 2018 <br />Calibration Standards Used <br />MANUFACTURER MODEL SERIAL NUMBER INTERVAL CAL. DUE TRACEABILITY NO. <br />Larson Davis LDSigGn/2209 0617 / 0104 1 12 Months 1 19 Dec 2017 2016-204448 <br />Reference Standards are traceable to the National Institute of Standards and Technology (NIST) <br />Temperature: 24 ° Centigrade <br />Calibration Environmental Conditions <br />Affirmations <br />Relative Humidity: 31 % <br />This Certificate attests that this instrument has been calibrated under the stated conditions with Measurement and Test Equipment (M&TE) <br />Standards traceable to the U.S. National Institute of Standards and Technology (NIST). All of the Measurement Standards have been calibrated to <br />their manufacturers' specified accuracy / uncertainty. Evidence of traceability and accuracy is on file at Provo Engineering & Manufacturing Center. <br />An acceptable accuracy ratio between the Standard(s) and the item calibrated has been maintained. This instrument meets or exceeds the <br />manufacturer's published specification unless noted. <br />The collective uncertainty of the Measurement Standard used does not exceed 25% of the applicable tolerance for each characteristic calibrated <br />unless otherwise noted. <br />The results documented in this certificate relate only to the item(s) calibrated or tested. A one year calibration is recommended, however calibration <br />interval assignment and adjustment are the responsibility of the end user. This certificate may not be reproduced, except in full, without the written <br />approval of the issuer. <br />"As received" data is the same as shipped data. <br />Tested with PRM828 S/N 2484 <br />Signed: <br />Technician: Sean Childs <br />Paae 1 of 1 <br />Provo Engineering and Manufacturing Center, 1681 West 820 North, Provo, Utah 84601 <br />Toll Free: 888.258.3222 Telephone: 716.926.8243 Fax: 716.926.8215 <br />ISO 9001-2008 Certified <br />