AMTECH ELEVATOR SERVICES - Laserfiche WebLink

Home Browse Search

ROUTINE PREVENTATIVE MAINTENANCE WORK The preventative maintenance specified is considered the minimum for all equipment. If specific equipment covered by this contract requires additional maintenance for safe and reliable operation the Contractor shall perform the required maintenance. The scope is full maintenance to regularly and systematically examine, lubricate, clean and adjust vertical transportation equipment and provide callback service and, as conditions warrant, repair or replace portions of the vertical transportation equipment included under the following with the exclusions as outlined in the section Excluded Services. Contractor's employees conducting elevator maintenance at the Police Department will have escorted access and will be continuously monitored while working at the Police Facility. Projects requiring permanent or semi -permanent assignment to the Police Facility for one to eight weeks will require a LiveScan, at Contractors expense. Proposer agrees to regularly and systematically examine, clean, lubricate and adjust the vertical transportation equipment and provide call-back service and, as conditions warrant, repair or replace all portions of the vertical transportation equipment included under this contract with the following exclusions only: 1. Repairs required because of negligence, accident, or misuse of the equipment by anyone other than the Contractor, his employees, sub - Contractors, servants or agents, or other causes beyond the Contractor's control except ordinary wear. 2. Repairs or replacement building items, such as hoistway or machine room walls and floors, car enclosures, car finish floor material, hoistway entrance frames, doors and sills, telephone equipment and signal fixture faceplates. 3. Mainline and auxiliary disconnect switches, fuses, and feeders to control panels. 4. Lamps for car and machine room illuminations. In performing the above -indicated work, Contractor agrees to provide only genuine parts used by the manufacturers of the equipment for replacement or repair, and to use only those lubricants obtained from and/or recommended by the manufacturer of the equipment. PERFORMANCE REQUIREMENTS Proposer agrees to maintain the following minimum performance requirements of the elevators designated below: 1. Speed as certified: +/- 5% under any loading condition. 2. Capacity: Safety lower, stop and hold up to 125% rated load. 3. Leveling: +/- 3/8" under any loading condition. 4. Door Closing Time, Thrust and Kinetic Energy shall comply with ANSI Code.