FULL PACKET_2020-09-15 - Laserfiche WebLink

Home Browse Search

material c. Horizontal location referenced to the provided datum and or as requested by the Engineer d. Obtain pipe, duct bank, encasement, and multi- conduit configuration width (outside diameter) e. Provide utility structure material composition and condition f Identify benchmarks used to determine elevations and include it as part of the final deliverable report. g. Identify and provide pavement thickness, material and condition and soil type characteristics. • All completed reports shall be certified to be correct and signed by a professional land surveyor registered in California. (Only if required by the Engineer). Work under this category will be paid on hourly basis. • Backfill all test holes shall be backfilled with in -kind material and compact to a relative compaction of 90%. • Boreholes greater than 211:2 shall be paved and match existing pavement thickness section unless stated otherwise and or approved by the Engineer. • Clean and sweep work site at the end of the work day. • Provide additional surveying, and underground utility mapping services at an hourly rate General Requirements and Proiect Deliverables: • All work for this work for traffic control shall be done in accordance with the Federal Highway Administration's Manual (MUTCD) • The selected firm/s shall obtain all necessary permits from the City and local jurisdiction prior to commencing any of the work in Public Right of Way. • Any work required on private property shall be authorized by the Engineer prior to commencement of work. • All work shall be done in accordance with ASCE Standard 38-02; Standard Guideline for the collection and depiction of the existing subsurface utility data. • The firm/s shall secure all permits to work in the City. These fees are not reimbursable. • All work shall be performed to the specific project and or location as detailed in the notice to proceed and indicated by the Engineer. • All reports and technical memoranda shall be submitted electronically to City and shall include all the information as required and detailed in the notice to proceed. All Computer Aided Drafting Design (CADD) work shall be submitted on electronic format (Microstation). In addition, a hard copy of the project findings and a digital file in Microstation shall be submitted to the engineer for review before final approval and final payment is authorized. A list of positions and hourly rates shall be included as part of the proposal and included in the seal bid package. See Attachment 4 — ADDITIONAL PROVISIONS for a sample breakdown. The consulting firm/s are responsible for any damage to utilities during the locating efforts. Consultant Responsibilities: City of Sant9WFFOM060