Laserfiche WebLink
6. REMOTE DISCONNECT FUNCTIONALITY <br />6.1. AMI remote connect/disconnect <br />6.1.1. When an AMI meter is configured for remote connect/disconnect, the <br />enQuesta work order will not need to be sent to the field to be worked. <br />6.1.2. When remote disconnects are created in batch, enQuesta will need to <br />stagger the disconnect messages to the MDMS so all disconnects do not happen <br />at the exact same time. The time is associated on the work order and a work order <br />Que is established to allow a user to review the list of open orders by Time to be <br />sent to the MDMS shut off work orders. <br />6.1.3. The Auto Void reconnect parameters are adjusted to work with remote <br />reconnect meters. So if a payment is made and the work order time is not elapse <br />it will be voided if processed a turn on work order will be established and sent to <br />the MDMS with a time to be worked automatically. <br />6.1.4. Scenarios where a Move out /Move in are close enough that no <br />disconnect or reconnect to the property is requested or required the enQuesta <br />work order will follow the work order control sheet template for completion as <br />explained in section 5.6.2 for work orders to get completed using a reading from <br />the MDM. <br />25H-1 20 Page 113 <br />