Laserfiche WebLink
spread or rolled during <br />unfavorable weather conditions. <br />4) When work is interrupted by <br />heavy rains, fill operations <br />shall not be resumed until <br />the field tests by the Soils <br />Engineer indicate the <br />moisture content and density <br />of the fill are as previously <br />specified. <br />g) Where moisture of the fill <br />material is below the limits <br />specified by the Soils <br />Engineer, water shall be <br />added until the moisture <br />content is as required to <br />ensure thorough bonding <br />and thorough compaction. <br />h) Where moisture content of <br />the fill material is above <br />the limits specified by the <br />Soils Engineer, the fill <br />materials shall be aerated <br />by blading or other <br />satisfactorymethods until <br />the moisture content is as <br />specified by the Soils <br />Engineer. <br />i) After each layer has been <br />placed, mixe an spread <br />evenly, it shall be thoroughly <br />compacted to not less than <br />90 percent of the maximum <br />dry density in accordance <br />with ASTM:D-1557 (5 <br />layers -25 blows per layer;10 <br />lbs. hammer dropped 18 <br />inches; 4" diameter mold) or <br />other density tests which will <br />attain equivalent results. <br />j) Compaction shall be by <br />sheepsfoot roller, multi - <br />wheel pneumatic tire roller <br />or other types of <br />acceptable rollers. <br />k) Rollers shall be of such <br />Resolution No. 2020-095 <br />Page 14 of 20 <br />