Laserfiche WebLink
THE <br />HARTFORD <br />SOUTH CAROLINA - INFORMATION ON WINDSTORM LOSS <br />MITIGATION FEATURES AND AVAILABLE PREMIUM DISCOUNTS - <br />ADVISORY NOTICE TO POLICYHOLDERS <br />This Notice provides information on the availability and range of premium discounts for properties on which fixtures or <br />construction techniques demonstrated to reduce the amount of loss in a windstorm have been installed or implemented. <br />The discounts apply only to the portion of the premium attributable to wind coverage. Listed below is general information <br />about available discounts. The estimates below are general in nature and the actual amount of the discount(s), if any, may <br />vary depending on specific features and conditions of the insured property. <br />Please contact your agent, broker or Hartford representative for more specific information. <br />Estimated Premium <br />Description of Mitigation Measures <br />Discount Percent <br />Range <br />Roof Covering and Roof Covering Attachment <br />o South Carolina Building Code (SCBC) Equivalent: Roof coverings and <br />attachments in compliance with the SCBC. <br />.01 -.04 <br />Roof Deck and Roof Deck Attachment <br />o Plywood/Oriented Strand Board with nails 2 1/2-inches long spaced at 6 <br />inches from the edge of the plywood and 12 inches in the field on 24-inch truss <br />spacing; <br />o Plywood/Oriented Strand Board with nails 2 1/2-inches long spaced at 6 <br />.01 -.04 <br />inches from the edge of the plywood and 6 inches in the field on 24-inch truss <br />spacing; <br />o Dimensional Lumber and Tongue and Groove Decks composed of 3/4-inch <br />thick boards with nominal widths of 4 inches or more; or <br />o Reinforced Concrete Roof Deck. <br />Roof -To -Wall Connection (Roof Anchorage) <br />o Clips: Pieces of metal that are nailed into the side of the rafter/truss and into <br />the side of the top plate or wall stud. The metal does not wrap around the top <br />of the rafter/truss, and the clip is only located on one side of the connection; <br />o Hurricane Ties — Single Wraps: A single strap that is attached to the side <br />and/or bottom of the top plate and is nailed to the rafter/truss; or <br />.01 - .03 <br />o Hurricane Ties — Double Wraps: Straps that are wrapped on both sides, are <br />attached to the side and/or bottom of the top plate, and are nailed to the <br />rafter/truss. <br />eGF �D <br />Form SP 90 04 10 18 ��/ 1°x REVIEWED & APPROVED BY.- <br />© 2018, The Hartford <br />(May include copyrighted material of Insurance Services Office, Inc., with its 1— ---- r skPjanagementAnalpt <br />