Laserfiche WebLink
Jeremy Larsen -2- February 14, 2017 <br />Kleinfelder West, Inc, <br />5. The facility shall provide laboratory and field testing personnel who are adequately <br />trained, supervised and currently certified as required by the latest ASTM or other <br />recognized standards. <br />6. Masonry inspectors assigned to projects under DSA jurisdiction shall have passed <br />DSA's masonry inspector examination and be specifically approved for each project <br />by the DSA field engineer. <br />7. Welding inspectors assigned to projects under DSA jurisdiction shall hold current <br />American Welding Society (AWS) Certified Welding Inspector (CWI) or Senior CWI <br />certification and be specifically approved for each project by the DSA field engineer. <br />8. The facility's Nondestructive Testing (NDT) program shall be supervised by an <br />individual currently certified by the American Society for Nondestructive Testing <br />(ASNT) as NDT Level III in applicable methods. Such certification shall have been <br />obtained through ASNT by testing, not by employer or self -certification. <br />9. The facility's NDT written practice and procedures shall conform to the requirements <br />of ANSI/ASNT CP-189, 2006, and be approved by the supervising Level III. All NDT <br />technicians assigned to projects under DSA jurisdiction shall hold current Level II or <br />greater certification, in accordance with the requirements of CP-189. <br />10. The laboratory facility shall provide test, inspection and verified reports In <br />accordance with the requirements of the 2016 California Building Standards <br />Administrative Code (CBC) Title 24, Part 1. Report format shall comply with LEA <br />Program requirements and applicable ASTM standards. <br />11. The physical location of the facility, including but not limited to laboratory equipment <br />and personnel, shall not change without prior notification to the DSA. <br />Please be aware that failure to comply with any of the requirements of the LEA Program <br />may result in this acceptance being revoked. A facility with a revoked acceptance may <br />be reinstated when it demonstrates all deficiencies cited by the DSA have been <br />corrected. Fees may be charged. <br />If you wish to continue DSA acceptance beyond your current expiration date, you must <br />submit a renewal application package at least 30 days prior to that date. The <br />application (form DSA 100-PRE) and detailed instructions outlining submittal <br />requirements can be downloaded from the DSA website, When we have received all <br />required information, we will schedule an on -site evaluation of your facility. <br />Thank you for participating in the Division of the State Architect's LEA program. Should <br />you have any questions regarding the LEA program requirements please feel free to <br />contact me at (916) 445-2193 or e-mail me at eric,france@dgs.ca.gov. <br />Sincerely, <br />Eric H. France <br />Division of the State Architect <br />Laboratory Evaluation and Acceptance Program <br />Enclosure: <br />