KDC SYSTEMS (2) - Laserfiche WebLink

Home Browse Search

and/or functional specifications. The Contractor shall be capable of providing panel building services consisting of the following components: 1. Motor control centers (MCCs) 2. Remote terminal unit (RTU) control panels 3. Human machine interfaces (HMIs) 4. Programmable logic computers (PLCs) 5. Variable frequent drives (VFD) 6. Motor operated valves (MOV) 7. Magnetic flowmeters (various brands) 8. Radio and communications equipment 9. Other related appurtenances Prior to the commencement of panel building services, the Contractor shall assess the project and provide a submittal to the City containing proposed equipment and components as well as a project schedule for the construction of the panels. The Contractor shall provide separate quotes, which shall be approved by the City's Project Manager prior to the commencement of work with a clearly established scope and timeline parameters. After receiving the City's Notice to Proceed, the Contractor shall begin the procurement of all equipment and materials associated with the construction of the new control panel. The Contractor shall inform the City of any long lead times that may affect project deadlines and the overall construction schedule. In addition and upon request by the City, the Contractor shall also repair and retrofit existing panels per the City's specifications and adhering to codes and regulations. 2. FACTORY ACCEPTANCE TEST The Contractor shall provide quality assurance and quality control through factory acceptance testing (FAT) on all constructed industrial control panels. The initial un- witnessed FAT procedures shall be performed by the Contractor's Test Engineer internally, and all self -identified non -conformances shall be rectified by the Contractor. Once all self - identified non -conformances are rectified, the final witnessed FAT procedures shall be overseen by a City Representative and performed by the Contractor's Test Engineer. The Contractor's Test Engineers shall be responsible for recording items checked and non - conformances. The following panel components shall be verified by the Contractor and City Representative during the FAT when applicable: 1. Panel Components and Mounting: a. The Contractor shall verify the panel assembly and the interior/exterior layout with the design. b, The Contractor shall confirm the enclosure mechanical components match the design and operate as specified (includes door latches, door closed switches, door stops, laptop shelf, disconnect handles, etc.), c. The Contractor shall confirm the spacing requirements of components and accessibility are met for panel installation and maintenance purposes (per design specifications). d. Heat vents, exhausts, fans, and dissipation areas of all applicable components shall be checked in addition to wires, devices, and shipping City of Santa Ana - RFP 21-100 Water Resources Panel Building Services Page 15 of 39