Laserfiche WebLink
Exhibit A <br />Residential Devices <br />Residential device inspections must satisfy both the Metropolitan and MWDOC inspection <br />procedures in place at the time of the post -inspection or issuance of the rebate check. Currently, <br />those inspection procedures are as follows: <br />In order for Participant Agency to be reimbursed for incentives from MWDOC/Metropolitan, <br />Participant Agency must certify on each invoice that the terms and conditions within each <br />project have been met, all devices have been installed, and all work has been performed. The <br />party signing each invoice must have signing authority to certify the invoice. <br />For residential device -based MAA Programs, Participant Agency shall utilize the sample size <br />calculator provided by MWDOC or other methodology as may be required by MET, to assist in <br />determining the appropriate number of devices to inspect to ensure a 98% installation rate <br />given the overall quantity of devices. Participant Agency must report verification/inspection <br />method employed on each invoice submitted. <br />Participant Agency must: <br />a. Validate quantity of devices installed. <br />b. Verify new device type, make, and model with Project information. <br />C. Verify Installation address or specific locations within the address with Project <br />documentation. <br />d. With permission from the customer, take photographs relating to the devices installed to <br />be included in Inspection report. <br />Indoor Inspection: Indoor inspection includes detailed fixture count of toilets and <br />clothes washer(s). Access to fixture locations (such as bathrooms and laundry facilities) . <br />are required to perform the inspection, and property owner/applicant person should be <br />made aware of this through the application. <br />ii. Outdoor Inspection: Outdoor inspection includes detailed fixture counts of installed and <br />operating landscape devices such as rain barrels, cisterns, irrigation controllers, <br />residential drip, and nozzles. For irrigation controllers, inspect the model to ensure it <br />matches the rebate application, verify that it is operating as a "smart device" and is <br />communicating with the onsite weather station or is receiving offsite/remote weather <br />data and, if possible, have the contact person show the inspector how the controller has <br />been programmed, and confirm quantity of stations of timer model. <br />Commercial Devices <br />Commercial MAA Program device inspections must satisfy both the Metropolitan and MWDOC <br />inspection procedures in place at the time of the post -inspection or issuance of the rebate <br />check. Metropolitan may require Participant Agency to submit inspection reports for specific <br />projects, and Metropolitan/MWDOC reserves the right to perform onsite inspections of <br />projects/sites prior to payment. <br />