Laserfiche WebLink
Exhibit A <br />contains live turf or sufficient evidence that live turf recently existed and that the requested <br />square footage to be removed is consistent with the inspector'smeasurement. This <br />requirement applies to both residential and commercial turf removal areas unless otherwise <br />noted. <br />When establishing that areas are eligible, careful inspection with accurate, and precise <br />measurements, as described in Section V, are always required. For Turf Removal, during the pre - <br />inspection the total project area square footage is measured. Any non -eligible square footage is <br />deducted, such as non -turf areas including bare soil, trees, shrubs, mulch, paving, and utility box <br />footprint, etc. Refer to specific program terms and conditions for eligibility criteria. <br />Once the pre -inspection is complete, the inspector will complete the Pre -Inspection section in <br />Droplet, in full, and upload all photos and documentation. Once the Pre -Inspection form has <br />been submitted, it will be reviewed by MWDOC. The square footage listed on the application is <br />to be used as a reference. The initial project area is to be based on the square footage as <br />measured during the pre -inspection. Once the initial project area square footage has been <br />determined, that number is used to reserve funding, and aLetter to Proceed (LTP) is generated <br />and sent to the customer. <br />Metropolitan reserves the right to request application packages as necessary and may perform its <br />own inspections of random residential applications. This is likely to be in addition to the required <br />pre -inspection. For pre -inspections, Metropolitan will review the Participant Agency's physical pre - <br />inspection reports. <br />On -Site Pre -Inspection <br />In -person pre -inspections must include: <br />• Visual verification of existing turf <br />• Physical/manual measurement of proposed turf removal area. <br />• Photos taken by inspector of project area (4 to 6), which must reflect the <br />current turf grass area at the time of inspection. Photos must be taken at <br />appropriate angles, with visible points of reference, and at a sufficient distance <br />to allow for review. <br />Measurine Sites Aeriall <br />Measuring sites aerially must include: <br />• GIS or equivalent aerial measurement <br />• Please note that measuring sites aerially is allowed for pre -inspections only <br />• Consumer is to provide photos of the turf area to be removed before starting the project <br />(pre -project installation). <br />• The inspector should be capable of spotting abnormalities in pre -project photos submitted <br />by customers, and if found, should perform mandatory on -site inspections. <br />