|
CONVERSE CONSULTANTS
<br />Schedule of Fees - Materials Laboratory Testing
<br />Compensation for laboratory testing services will be based on rates In accordance with this fee schedule which Includes test report(s)
<br />and engineering time. Costs of tests not on this schedule will be by quote and/or In accordance with our current hourly fee schedule. Our
<br />services will be performed In accordance with the General Conditions. This fee schedule is valid through December 31, 2022,
<br />AGGREGATES
<br />Moisture Content, ASTM D2216..............................................
<br />20.00
<br />Particle Size Analysis
<br />Coarse, ASTM C136, each ...............................................
<br />100,00
<br />Coarse and Fine, ASTM C136 & C137), each ..................
<br />180.00
<br />Specific Gravity & Absorption
<br />Coarse Aggregate, ASTM C127.......................................
<br />100.00
<br />Fine Aggregate, ASTM C128..........................................
<br />100,00
<br />Unit Weight per Cubic Foot, ASTM C29 .............................
<br />75.00
<br />Soundness, Sodium or Magnesium, ASTM C88, each.....
<br />200,00
<br />Potential Alkali Reactivity, ASTM D289 ............................
<br />300,00
<br />Freeze Thaw Soundness ..................................................
<br />175,00
<br />Los Angeles Abrasion, per class, ASTM C131, C535.......
<br />220,00
<br />Sand Equivalent, ASTM D2419.......................................
<br />110,00
<br />Lightweight Particles, ASTM C123, each........ .................
<br />100,OD
<br />Clay Lumps & Friable Particles, ASTM 0142, each..........
<br />120.00
<br />Stripping Test, ASTM 01664, each ....................................
<br />8&00
<br />Organic Impurities, ASTM C40.........................................
<br />100.00
<br />Durability......................................................................
<br />By Quote
<br />CONCRETE TESTS
<br />Laboratory Trial Batch, ASTM C192..................... I............
<br />By Quote
<br />Laboratory Mix Design, Historical Data ..............................
<br />By Quote
<br />Compression Test, 6"xl 2" Cylinder, ASTM C39, each .............
<br />45.00
<br />Lightweight Concrete
<br />Compression......................................................................
<br />45.00
<br />UnitWeight .........................................................................
<br />45.00
<br />Specimen Preparation, Trimming or Coring, each ...................
<br />00.00
<br />Bond Strength, ASTM C321
<br />Prepared by Converse.................................I..........I........150.00
<br />Prepared by Others...........................................................
<br />80.00
<br />Core Compression Test, ASTM C12, each... . .......................
<br />80.00
<br />Flexure Test, 6"x6" Beams, ASTM C78, each ........................
<br />110.00
<br />Modulus of Elasticity, Static, ASTM C469, each ....................
<br />150.00
<br />Length Change, ASTM 0157. 3 bars, 5 readings each,
<br />upto 26 days .................... -..............................................
<br />320.00
<br />Splitting Tensile, 6"xl2" Cylinders, each ..................................
<br />80.00
<br />Field Concrete Control (sampling, slump, temperature,
<br />cast 4 cylinders, molds, cylinder pick-up, within 10 miles
<br />of office, stand-by extra), ASTM/UBC, hourly rate
<br />schedule, or each cylinder .................................................
<br />96,00
<br />Field Concrete Control (same as above plus air content test),
<br />ASTM/UBC, each cylinder..... ....... ......................................
<br />95.00
<br />Hold Cylinder.. .. ........... ..................................... ...... .........
<br />- 10.00
<br />Cylinder Mold, sent to Job site but not cast by Converse or
<br />returned to Converse...........................................................
<br />5,00
<br />MASONRY (ASTM C140, E447, UBC STANDARD 24.22)
<br />Moisture Content, as received, each .......................... .............
<br />20.00
<br />Absorption, each....................................................................
<br />50.00
<br />Compression, each.................................................................
<br />55.00
<br />Shrinkage, ASTM C426, each ...............................................
<br />100.00
<br />Net Area and Volume, each .................................. ..................
<br />26.00
<br />Masonry Blocks, per set of 9..................................................
<br />450.00
<br />Masonry Core Compression, each ..................................
<br />........ 55.00
<br />MasonryCore Shear, each.. ..... ....................... .............
<br />........55.00
<br />Masonry Core Trimming, each ................... ....................,........
<br />55.00
<br />Compression Test, grouted prisms, 8'S<8°x16", each ..............
<br />120.00
<br />Compression Test, grouted prisms, 12"x16"x16", each
<br />.......... 130.00
<br />Compression Test
<br />2"x4" Mortar Cylinder, each ................................................
<br />45.00
<br />3"x6" Grout Prisms, each ...................................................
<br />45.D0
<br />2" Cubes, ASTM C109, each ..................................
<br />........... 45.00
<br />Cost by Others. .......... ... ... ................ ............... ...
<br />........... 45.00
<br />Mortar or Grout Mix Designs ................................. ............
<br />By Quote
<br />FIREPROOFING TESTS
<br />Oven Dry Density, per sample ................................................. 70.00
<br />MOISTURE EMISSION TEST
<br />Moisture Emission Test Kit......................................................80.00
<br />ASPHALTIC CONCRETE
<br />Stability, Flow, and Unit Weight, ASTM D6927 .....................220.00
<br />Marshall ASTM D1559, ASTM D2726...................................220.00
<br />Measured Maximum Specific Gravity of Mix, ASTM D2041,
<br />Rice Method, each .... .......................................................
<br />95,00
<br />Void Analysis of Cores or Marshall Specimens,
<br />Calculations Only, ASTM D3203, set of 2 or 3...........
<br />........ 60,00
<br />Laboratory Mixing of Asphalt & Concrete, per sample.............7&D0
<br />Complete Asphalt Concrete MIX Design
<br />Hveem or Marshall......................................................By
<br />Quote
<br />Extraction of Asphalt and Gradation. ASTM 02172, Method
<br />B,
<br />or California 310, including ash correction, each.............220.00
<br />Extraction of Rubberized Asphalt & Gradation, each.............250.00
<br />Specific Gravity, ASTM 02726 or ASTM D1188
<br />Uncoated...........................................................................95.00
<br />Coated. ............................................................................
<br />105.00
<br />Immersion -Compression ..................................................
<br />... 400.00
<br />Particle Coating, ASTM D2489............................................
<br />..60,00
<br />Stripping, ASTM D1664................................................
<br />..70.00
<br />Moisture or VolallIs Distillates In Paving Mixtures, or
<br />Materials Containing Petroleum Products or
<br />By-Products.....................................................................220.00
<br />Retained Strength, ASTM 01074/D1075, 6 specimens.....
<br />By Quote
<br />Retained Stability, Mil, Std, 620A, Method 104,
<br />6 specimens................................................................By
<br />Quote
<br />CBR, ASTM D1883, Including MID Curve, 1 point................350.00
<br />Asphalt Temperature.- ............................... ......... ..................
<br />15.00
<br />STRUCTURALSTEEL
<br />Tensile Test 09 Bar or Smaller, each......................................50.00
<br />Bend Test #9 Bar or Smaller, each.........................................60.00
<br />Tensile Test 010 Bar or Greater, each..................................280.00
<br />Tensile Test 014 Bar, each ...................................................
<br />310.00
<br />Reber Coupler Tensile Test ..................................................
<br />100.00
<br />Tensile Test, Welded #9 Bar or Smaller, each ......................100.00
<br />Tensile Test, Welded 410 Bar or Greater, each....................280.00
<br />Tensile Test, Welded 414 Bar, each.....................................310.00
<br />Tensile Test, Mechanically Spliced, #9 Bar or Smaller,
<br />each................................................................................
<br />180.00
<br />Tensile Test, Mechanically Spliced, #10 Bar or Greater,
<br />each................................................................................360.00
<br />HIGH STRENGTH BOLT, NUT, AND WASHER TESTING
<br />Wedge Tensile Test, A490 Bolts
<br />Under 100,000 lbs., each..................................................65.00
<br />Over 100,000 lbs., each....................................................75.00
<br />Wedge Tensile Test, A325 Bolts
<br />Under 100,000 lbs., each..................................................80.00
<br />Tensile Test, Anchor Bolts, tested with displacement
<br />transducers, each............................................................
<br />300.00
<br />Nut Hardness, Proof & Cone Proof Load Test, each...............50.00
<br />WasherHardness, each..........................................................50.00
<br />AS25 or A490, Bolt Hardness Only, each ..........................
<br />.....50.00
<br />Bolt A325 or A490 Wedge Tensile
<br />Under 100,000 lbs. & Hardness, each...............................90.00
<br />Over 100.000 lbs. & Hardness, each ...............................
<br />160.00
<br />Bolt, Nut & Washer, sIl tests per set with bolts
<br />Under 100,000 Ibs.......................................................
<br />...300,00
<br />Over 100,000 Ibs.........................................................
<br />...380.00
<br />See Schedule of Fees — Geotechnlcal Laboratory Testing for soil
<br />testing. Hourly rates are available upon request. Field Laboratory
<br />rates are available upon request. Listed unit rates are based upon
<br />the assumption that samples will be delivered to our laboratory at no
<br />cost to Converse.
<br />Converse Consultants MT82022
<br />
|