Laserfiche WebLink
available for moving wood chips, hogged material, wood fines and raw product <br />during fire -fighting operations. <br />(g) Section 2808.11 Temperature control, is hereby added as follows: <br />2808.11 Temperature control. The temperature shall be monitored and <br />maintained as specified in Sections 2808.11.1 and 2808.11.2. <br />(h) Section 2808.11.1 Pile temperature control, is hereby added as follows: <br />2808.11.1 Pile temperature control. Piles shall be rotated when the internal <br />temperature readings are in excess of 165 degrees Fahrenheit. <br />(i) Section 2808.11.2 New material temperature control, is hereby added as <br />follows: <br />2808.11.2 New material temperature control. New loads delivered to the facility <br />shall be inspected and tested at the facility entry prior to taking delivery. Material <br />with temperature exceeding 165 degrees Fahrenheit shall not be accepted on the <br />site. New loads shall be monitored to verify that the temperature remains stable. <br />0) Section 2808.12 Water availability is hereby added as follows: <br />2808.12 Water Availability. Facilities with over 2500 cubic feet shall provide a <br />water supply. The minimum fire flow shall be no less than 500 GPM @ 20 psi for <br />a minimum of 1 hour duration for pile heights up to 6 feet and 2 hour duration for <br />pile heights over 6 feet. If there is no water purveyor, an alternate water supply <br />with storage tank(s) shall be provided for fire suppression. The water supply <br />tank(s) shall provide a minimum capacity of 2500 gallons per pile (maximum <br />30,000 gallons) for piles not exceeding 6 feet in height and 5000 gallons per pile <br />(maximum 60,000) for piles exceeding 6 feet in height. Water tank(s) shall not be <br />used for any other purpose unless the required fire flow is left in reserve within <br />the tank at all times. An approved method shall be provided to maintain the <br />required amount of water within the tank(s). <br />(k) Section 2808.13 Tipping area is hereby added as follows: <br />2808.13 Tipping areas shall comply with the following: <br />1. Tipping areas shall not exceed a maximum area of 50 feet by 50 feet. <br />2. Material within a tipping area shall not exceed 5 feet in height at any time. <br />3. Tipping areas shall be separated from all piles by a 20 foot wide fire <br />access lane. <br />Ordinance No. NS-3032 <br />Page 21 of 29 <br />