KIMLEY-HORN (6) - Laserfiche WebLink

Home Browse Search

The Consultant shall perform engineering design services resulting in contract documents (plans, specifications and cost estimates "PS&E") for various projects on an as -needed basis. However, work tasks may include studies or a variety of engineering tasks. If requested by the City, the Consultant shall provide a Work Plan which includes a detailed schedule of the assigned project prior to the issuance of Notice to Proceed and/or Task Order. Specific Task Orders with Notices to Proceed ("NTPs") will be provided for project(s) at the discretion of the City. Work required per Task Order shall comply with the Scope of Services and additional provisions in each Task Order and this agreement. A... The following services/items shall include but are not be limited to: 1. Research existing records of utility companies and agencies and coordinate the proposed improvements with existing field conditions, 2. Conduct an environmental assessment for each project and prepare all documentation required to comply with California Environmental Quality Act (CEQA), and or National Environmental Protection Act (NEPA), (If required) 3. Provide all field survey and topographic work necessary to complete the design effort. Design level survey and base mapping of the project site shall be prepared in US Customary English units by a California licensed Land Surveyor in accordance with the City guidelines and in Microstation V8i Computer Aided Design and Drafting (CADD) format. The horizontal datum shall be NAD 83 and the vertical datum shall be NAVD 88. All survey field notes shall be on forms provided by the City, shall be neatly completed in pencil, and shall become property of the City upon completion of the project. Informal field investigations including marking of removal areas may be required for some of the sidewalk, curb and gutter, and pavement replacement projects. 4. Complete the design of projects including plans, specifications, and engineer's construction cost estimate. The Consultant shall contact manufacturers and/or contractors to verify the engineer's estimate prior to submitting to the City. Specifications shall be prepared in Microsoft Word and an electronic copy of the final version shall be fiurnished to the City. The City will provide the specification boilerplate to the Consultant. 5. If requested, all preliminary and bid sets of plans shall be plotted on bond or velum paper using Microstation V8i CADD software program. All drawings shall be completed per the City of Santa Ana CADD Standards and any special provisions thereof. For interim submittals, the City may opt to receive only PDF versions of the plans for reviewing purposes. If so, the Consultant team will provide plans and/or specifications accordingly. 6. All original plan sheets, the title sheet of the specifications, calculations, and reports shall be signed and stamped by the Consultant's licensed professional engineer responsible/in-charge of the project. City of Santa Ana RFP 23-030 Page Al-4