Item 25 - Agreement with HCI Environmental & Engineering Service for Police Range Cleaning Services

Home Browse Search

Reclining Rubber Bullet Trap Maintenance Lead Mining •HCI Environmental to provide lead certified workers, and equipment to provide Annual leadmining of the firing ranges. o Year 1-Upper range only o Year 2-Upper and lower ranges o Year 3-Upper range only •Santa Ana Police Department, personnel will lockout/tag out HVAC firing range units before work commences. •Post lead warning signage and set up containment area with 2 layers of 6 mil poly plastic and seal all critical barriers. •HCI Environmental shall complete the separation of the rubber material from the lead material and re-packing the bullet trap/hopper with recycled rubber material. •HCI Environmental shall extract lead from the rubber material using removal techniques that shall ensure decontamination procedures are in compliance with CAL OSHA and EPA Hazardous Waste control law •HCI Environmental to shovel and rake rubber media to re-create factory specification slope angle for the bullet trap. •HCI Environmental will use extra bags of rubber material to unsure proper angle. •HCI Environmental to apply a surface coat of fire retardant powder over rubber media. •HCI Environmental shall clean lead contaminated equipment on the indoor firearm range. •HCI Environmental shall remove bullet material from premises. •Manifest, label, profile, transport and dispose and containerize lead contaminted waste in UN approved containers for transportation/disposal. •We estimate the scope of work to be completed in 5 working day with 4 techs for each range. •Labor for this project will be based on prevailing wages. •All lead remediation will be handled according to local, state and federal regulation •Hazardous Waste transportation and disposal to include the following: 4 Tri wall boxes lead contaminated debris 2-55g- open top metal drums for lead contaminated debris