Item 23 - Water Control Panel Building Services

Home Browse Search

_ KDC systems An FMCCR Company For control panels with PLCs we will verify 1/0 checkout and any applicable networks. We will configure required 1/0 in a PLC test program and verify proper digital input operation by jumpers and digital outputs by forcing and verifying relays and lights. Analog inputs will be verified using signal generators and analog outputs will be confirmed using multimeters. Once KDC has completed all testing and verification, the same test will be repeated with the City's Representative and results documented on City's Control Panel Testing form. 3.3. Post -Installation Field Testing Once system installation has been successfully completed and installed, we will perform a site acceptance test. We will test the full operation and functionality of the completed system in the SAT with a City Representative. Once all operation and functionality are confirmed and approved by the City Personnel in the SAT, we will commence on -site closeout and final completion of the project. During on -site closeout, we will review panel drawings for any redlines, changes or corrections and make sure these are implemented and captured on the drawings. We will make sure any non -conformances have been corrected and re -tested. We will clean and vacuum the panel and take detailed photos after installation. For in -office closeout we will update drawings to reflect as -built condition and provide all records including photos and schematics to the City upon closeout of the project. 3.4. Panel Design Services Upon request by the City, we will provide control panel design services that conform to City standards. Depending on the application, the drawing sets will include Panel Layouts, Power Distribution, Network Diagrams, 10 Drawings and a Bill of Materials (these will reference the Layout Drawings and part numbers). Page 11 KDC Systems An FMCCR Company