NS-036 - Laserfiche WebLink

Home Browse Search

the actual length of the lot lines. T~e width of all easements and sufficient ties thereto definitely to locat~/~he same with respect to the subdivision must be shown. Ail easements must be clearly labeled and identified; if an easement shown on the map is already of record, its recorded reference must be given. If an easement is being dedicated, it shall be set out in the ~wner's certificate of dedication. Ail notes and figures pertaining to easements shall be considerably smaller and lighter than those relating to the subdivision itself. "SECTION 9327. Block Lengths. "Blocks shall not exceed one-thousand three hundred feet (1,300') in length between street lines, except where topographi- cal conditions or division of land into acre parcels or larger justify or require a variation from this requirement. "SECTION 9327.1. Acre or Large Lot Subdivision. "Where a parcel is first subdivided into small farms or acre tracts, the blo~k shall be of such size and shape and be so divi- ded as to provide for the opening of primary and secondary streets, and for the extension and opening of streets and alleys at such intervals as will permit a subsequent division of any parcel into lots of normal size. "SECTION 9327.2. Block Length - Dead-end Streets. "A dead-end street on which future extension is not intended or possible, shall not be longer than five hundred feet (500') from the nearest intersecting street line and in no instance shall serve more then twenty (20) present or potential building sites fronting on the dead-end street. "SECTION 9227.3. Block Width. "The width of each block shall be sufficient for an ultimate layout of two tiers of lots therein of a size required by the pro- visions of this Chapter unless the arrangement of an immediately adjacent approved subdivision, lines of ownership, or topographical -8-