NS-1424 - Laserfiche WebLink

Home Browse Search

ORDINANCE NO. NS-1424 Page 16 Tests shall be performed on the samples in the following order: ae With the panels in the test position, a concentrated load of 800 pounds shall be applied to the vertical pull stile incor- porating a locking device, at a point on the stile within 6 inches of the locking device, in the direction parallel to the plane of the glass that would tend to open the door. With the load removed, deter- mine if the primary locking device can be unlocked by manipulation as described in Test 1, infra. With panels in the test position, a con- centrated load of 50 pounds shall be applied to the vertical pull stile incor- porating a locking device, at a point on the stile within 6 inches of the locking device, in the direction parallel to the plane of the glass that would tend to open the door while, simultaneously, an addi- tional concentrated load of 200 pounds is applied to the same area of the same stile in a direction perpendicular to the plane of glass toward the interior side of the building. With the load applied, deter- mine if the primary locking device can be unlocked by manipulation as directed in Test 1, infra. Repeat Test b substituting 800 pounds for the indicated 50 pounds. Perform the manipulation tests with the load removed. With the panels in the test position, a concentrated load of 50 pounds shall be applied to the vertical pull stile incor- porating a locking device, at a point on the stile within 6 inches of the locking device, in the direction parallel to the plane of the glass that would tend to open the door while simultaneously, an addi- tional concentrated load of 200 pounds is applied to the same stile in the direction perpendicular to the plane of the glass toward the exterior side of the door. With the load applied, determine if the primary locking device can be unlocked by manipulation as described in Test 1, infra. e® Repeat Test d substituting 800 pounds for the indicated 50 pounds. Perform the manipulation tests with the load removed. ft with the movable panel lifted upward to its full limit within the confines of the door frame, a concentrated load of 800 pounds shall be applied separately to each vertical pull stile incorporating a lock- ing device, at a point on the stile within 6 inches of the locking device, in the direction parallel to the plane of the glass that would tend to open the door.