My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
NS-1901
Clerk
>
Ordinances
>
1953 - 1999 (NS-001-NS-2415)
>
1987 (NS-1883 - NS-1938)
>
NS-1901
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
1/3/2012 1:03:41 PM
Creation date
6/26/2003 10:08:07 AM
Metadata
Fields
Template:
City Clerk
Doc Type
Ordinance
Doc #
NS-1901
Date
6/1/1987
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
7
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
006 <br /> <br />ORDINANCE NO. NS- 1901 <br />PAGE TWO <br /> <br />SECTION 3: That Section 8-303 of the Santa Ana Municipal <br />Code is hereby amended to read as follows: <br /> <br />Sec. 8-303. Department having jurisdiction. <br /> <br /> Administration and enforcement of this code shall be <br />the duty of the building official of the city. <br /> <br />SECTION 4: The Santa Ana Municipal Code is hereby amended by <br />adding a section, to be numbered S 8-399, which said section <br />shall read as follows: <br /> <br />Sec. 8-399. <br /> <br />Hanger and supports (Section 316(b), <br />horizontal piping. <br /> <br /> Section 316(b) of the Plumbing Code is amended to read <br />as follows: <br /> <br />(b) Horizontal piping: <br /> <br />(1) <br /> <br />Supports - Horizontal <br />at sufficiently close <br />alignment and prevent <br /> <br />piping shall be supported <br />intervals to keep it in <br />sagging. <br /> <br />(2) <br /> <br />Cast iron soil pipe - Where joints occur, <br />suspended cast iron soil pipe shall be supported <br />with approved manufactured split ring or clevis <br />type hangers and rods at not more than five (5) <br />foot intervals; except that pipe exceeding five <br />(5) feet in length, may be supported at not more <br />than ten (10) foot intervals. Supports shall be <br />adequate to maintain alignment and prevent <br />sagging and shall be placed within eighteen (18) <br />inches of the hub or joint. Hubless or <br />compression gasket joints must be supported at <br />least at every other joint except that when the <br />developed length between supports exceeds four <br />(4) feet, they shall be provided at each joint. <br />Supports shall also be provided at each <br />horizontal branch connection. Supports shall be <br />placed on or immediately adjacent to the <br />coupling. Suspended lines shall be suitably <br />braced to prevent horizontal movement. <br /> <br /> <br />
The URL can be used to link to this page
Your browser does not support the video tag.